The Firebird 5.0 Language Reference | Predicates | Comparison Predicates | Other Comparison Predicates

`BETWEEN`

Syntax

<value> [NOT] BETWEEN <value_1> AND <value_2>

The BETWEEN predicate tests whether a value falls within a specified range of two values.(NOT BETWEEN tests whether the value does not fall within that range.)

The operands for BETWEEN predicate are two arguments of compatible data types.The BETWEEN predicate in Firebird is asymmetrical — if the lower bound is not the first argument, the BETWEEN predicate will return FALSE.The search is inclusive (the values represented by both arguments are included in the search).In other words, the BETWEEN predicate could be rewritten:

<value> >= <value_1> AND <value> <= <value_2>

When BETWEEN is used in the search conditions of DML queries, the Firebird optimizer can use an index on the searched column, if it is available.

Example

SELECT *
FROM EMPLOYEE
WHERE HIRE_DATE BETWEEN date '1992-01-01' AND CURRENT_DATE

`LIKE`

Syntax

<match_value> [NOT] LIKE <pattern>
   [ESCAPE <escape character>]

<match_value>      ::= character-type expression
<pattern>          ::= search pattern
<escape character> ::= escape character

The LIKE predicate compares the character-type expression with the pattern defined in the second expression.Case- or accent-sensitivity for the comparison is determined by the collation that is in use.A collation can be specified for either operand, if required.

Wildcards

Two wildcard symbols are available for use in the search pattern:

the percentage symbol (%) will match any sequence of zero or more characters in the tested value
the underscore character (_) will match any single character in the tested value

If the tested value matches the pattern, taking into account wildcard symbols, the predicate is TRUE.

Using the `ESCAPE` Character Option

If the search string contains either of the wildcard symbols, the ESCAPE clause can be used to specify an escape character.The escape character must precede the ‘%’ or ‘_’ symbol in the search string, to indicate that the symbol is to be interpreted as a literal character.

Examples using `LIKE`

Find the numbers of departments whose names start with the word “Software”:

SELECT DEPT_NO
FROM DEPT
WHERE DEPT_NAME LIKE 'Software%';

It is possible to use an index on the DEPT_NAME field if it exists.

Note

About LIKE and the Optimizer

The LIKE predicate itself does not use an index.However, if the predicate takes the form of LIKE 'string%', it will be converted to the STARTING WITH predicate, which will use an index.This optimization only works for literal patterns, not for parameters.

So, if you need to search for the beginning of a string, it is recommended to use the [fblangref50-commons-predstartwith] predicate instead of the LIKE predicate.

Search for employees whose names consist of 5 letters, start with the letters “Sm” and end with “th”. The predicate will be true for such names as “Smith” and “Smyth”.
```
SELECT
  first_name
FROM
  employee
WHERE first_name LIKE 'Sm_th'
```

Search for all clients whose address contains the string “Rostov”:

SELECT *
FROM CUSTOMER
WHERE ADDRESS LIKE '%Rostov%'

Note	If you need to do a case-insensitive search for something enclosed inside a string (`LIKE '%Abc%'`), use of the [fblangref50-commons-predcontaining] predicate is recommended, in preference to the `LIKE` predicate.

Search for tables containing the underscore character in their names.The ‘#’ character is used as the escape character:
```
SELECT
  RDB$RELATION_NAME
FROM RDB$RELATIONS
WHERE RDB$RELATION_NAME LIKE '%#_%' ESCAPE '#'
```

`STARTING WITH`

Syntax

<value> [NOT] STARTING WITH <value>

The STARTING WITH predicate searches for a string or a string-like type that starts with the characters in its value argument.The case- and accent-sensitivity of STARTING WITH depends on the collation of the first value.

When STARTING WITH is used in the search conditions of DML queries, the Firebird optimizer can use an index on the searched column, if it exists.

Example

Search for employees whose last names start with “Jo”:

SELECT LAST_NAME, FIRST_NAME
FROM EMPLOYEE
WHERE LAST_NAME STARTING WITH 'Jo'

See also

LIKE

`CONTAINING`

Syntax

<value> [NOT] CONTAINING <value>

The CONTAINING predicate searches for a string or a string-like type looking for the sequence of characters that matches its argument.It can be used for an alphanumeric (string-like) search on numbers and dates.A CONTAINING search is not case-sensitive.However, if an accent-sensitive collation is in use then the search will be accent-sensitive.

Examples

Search for projects whose names contain the substring “Map”:
```
SELECT *
FROM PROJECT
WHERE PROJ_NAME CONTAINING 'Map';
```
Two rows with the names “AutoMap” and “MapBrowser port” are returned.
Search for changes in salaries with the date containing number 84 (in this case, it means changes that took place in 1984):
```
SELECT *
FROM SALARY_HISTORY
WHERE CHANGE_DATE CONTAINING 84;
```

See also

LIKE

`SIMILAR TO`

Syntax

string-expression [NOT] SIMILAR TO <pattern> [ESCAPE <escape-char>]

<pattern>     ::= an SQL regular expression
<escape-char> ::= a single character

SIMILAR TO matches a string against an SQL regular expression pattern.Unlike in some other languages, the pattern must match the entire string to succeed — matching a substring is not enough.If any operand is NULL, the result is NULL.Otherwise, the result is TRUE or FALSE.

If a literal pattern is used, and it doesn’t start with a wildcard or other special regex character, SIMILAR TO can use an index.

Escaping Special Characters

To match against a character that is special in regular expressions, that character has to be escaped.There is no default escape character;the user specifies one when needed:

'Peer (Poire)' similar to 'P[^ ]+ \(P[^ ]+\)' escape '\'    -- true
'Pera [Pear]'  similar to 'P[^ ]+ #[P[^ ]+#]' escape '#'    -- true
'Päron-äppledryck' similar to 'P%$-ä%' escape '$'           -- true
'Pärondryck' similar to 'P%--ä%' escape '-'                 -- false

The last line demonstrates that the escape character can also escape itself, if needed.

Syntax: SQL Regular Expressions

The following syntax defines the SQL regular expression format.It is a complete and correct top-down definition.It is also highly formal and long, and may be daunting to anyone who hasn’t already some experience with regular expressions (or with highly formal, rather long top-down definitions).Feel free to skip it and read the next section, Building Regular Expressions, which uses a bottom-up approach, aimed at the rest of us.

<regular expression> ::= <regular term> ['|' <regular term> ...]

<regular term> ::= <regular factor> ...

<regular factor> ::= <regular primary> [<quantifier>]

<quantifier> ::= ? | * | + | '{' <m> [,[<n>]] '}'

<m>, <n> ::= unsigned int, with <m> <= <n> if both present

<regular primary> ::=
    <character> | <character class> | %
  | (<regular expression>)

<character> ::= <escaped character> | <non-escaped character>

<escaped character> ::=
  <escape-char> <special character> | <escape-char> <escape-char>

<special character> ::= any of the characters []()|^-+*%_?{}

<non-escaped character> ::=
  any character that is not a <special character>
  and not equal to <escape-char> (if defined)

<character class> ::=
    '_' | '[' <member> ... ']' | '[^' <non-member> ... ']'
  | '[' <member> ... '^' <non-member> ... ']'

<member>, <non-member> ::= <character> | <range> | <predefined class>

<range> ::= <character>-<character>

<predefined class> ::= '[:' <predefined class name> ':]'

<predefined class name> ::=
  ALPHA | UPPER | LOWER | DIGIT | ALNUM | SPACE | WHITESPACE

Building Regular Expressions

In this section are the elements and rules for building SQL regular expressions.

Characters

Within regular expressions, most characters represent themselves.The only exceptions are the special characters below:

[ ] ( ) | ^ - + * % _ ? { }

... and the escape character, if it is defined.

A regular expression that contains no special characters or escape characters matches only strings that are identical to itself (subject to the collation in use).That is, it functions just like the ‘=’ operator:

'Apple' similar to 'Apple'  -- true
'Apples' similar to 'Apple' -- false
'Apple' similar to 'Apples' -- false
'APPLE' similar to 'Apple'  -- depends on collation

Wildcards

The known SQL wildcards ‘_’ and ‘%’ match any single character and a string of any length, respectively:

'Birne' similar to 'B_rne'   -- true
'Birne' similar to 'B_ne'    -- false
'Birne' similar to 'B%ne'    -- true
'Birne' similar to 'Bir%ne%' -- true
'Birne' similar to 'Birr%ne' -- false

Notice how ‘%’ also matches the empty string.

Character Classes

A bunch of characters enclosed in brackets define a character class.A character in the string matches a class in the pattern if the character is a member of the class:

'Citroen' similar to 'Cit[arju]oen'     -- true
'Citroen' similar to 'Ci[tr]oen'        -- false
'Citroen' similar to 'Ci[tr][tr]oen'    -- true

As can be seen from the second line, the class only matches a single character, not a sequence.

Within a class definition, two characters connected by a hyphen define a range.A range comprises the two endpoints and all the characters that lie between them in the active collation.Ranges can be placed anywhere in the class definition without special delimiters to keep them apart from the other elements.

'Datte' similar to 'Dat[q-u]e'          -- true
'Datte' similar to 'Dat[abq-uy]e'       -- true
'Datte' similar to 'Dat[bcg-km-pwz]e'   -- false

Predefined Character Classes

The following predefined character classes can also be used in a class definition:

[:ALPHA:]: Latin letters a..z and A..Z.With an accent-insensitive collation, this class also matches accented forms of these characters.
[:DIGIT:]: Decimal digits 0..9.
[:ALNUM:]: Union of [:ALPHA:] and [:DIGIT:].
[:UPPER:]: Uppercase Latin letters A..Z.Also matches lowercase with case-insensitive collation and accented forms with accent-insensitive collation.
[:LOWER:]: Lowercase Latin letters a..z.Also matches uppercase with case-insensitive collation and accented forms with accent-insensitive collation.
[:SPACE:]: Matches the space character (ASCII 32).
[:WHITESPACE:]: Matches horizontal tab (ASCII 9), linefeed (ASCII 10), vertical tab (ASCII 11), formfeed (ASCII 12), carriage return (ASCII 13) and space (ASCII 32).

Including a predefined class has the same effect as including all its members.Predefined classes are only allowed within class definitions.If you need to match against a predefined class and nothing more, place an extra pair of brackets around it.

'Erdbeere' similar to 'Erd[[:ALNUM:]]eere'     -- true
'Erdbeere' similar to 'Erd[[:DIGIT:]]eere'     -- false
'Erdbeere' similar to 'Erd[a[:SPACE:]b]eere'   -- true
'Erdbeere' similar to [[:ALPHA:]]              -- false
'E'        similar to [[:ALPHA:]]              -- true

If a class definition starts with a caret, everything that follows is excluded from the class.All other characters match:

'Framboise' similar to 'Fra[^ck-p]boise'       -- false
'Framboise' similar to 'Fr[^a][^a]boise'       -- false
'Framboise' similar to 'Fra[^[:DIGIT:]]boise'  -- true

If the caret is not placed at the start of the sequence, the class contains everything before the caret, except for the elements that also occur after the caret:

'Grapefruit' similar to 'Grap[a-m^f-i]fruit'   -- true
'Grapefruit' similar to 'Grap[abc^xyz]fruit'   -- false
'Grapefruit' similar to 'Grap[abc^de]fruit'    -- false
'Grapefruit' similar to 'Grap[abe^de]fruit'    -- false

'3' similar to '[[:DIGIT:]^4-8]'               -- true
'6' similar to '[[:DIGIT:]^4-8]'               -- false

Lastly, the already mentioned wildcard ‘_’ is a character class of its own, matching any single character.

Quantifiers

A question mark (‘?’) immediately following a character or class indicates that the preceding item may occur 0 or 1 times to match:

'Hallon' similar to 'Hal?on'                   -- false
'Hallon' similar to 'Hal?lon'                  -- true
'Hallon' similar to 'Halll?on'                 -- true
'Hallon' similar to 'Hallll?on'                -- false
'Hallon' similar to 'Halx?lon'                 -- true
'Hallon' similar to 'H[a-c]?llon[x-z]?'        -- true

An asterisk (‘*’) immediately following a character or class indicates that the preceding item may occur 0 or more times to match:

'Icaque' similar to 'Ica*que'                  -- true
'Icaque' similar to 'Icar*que'                 -- true
'Icaque' similar to 'I[a-c]*que'               -- true
'Icaque' similar to '_*'                       -- true
'Icaque' similar to '[[:ALPHA:]]*'             -- true
'Icaque' similar to 'Ica[xyz]*e'               -- false

A plus sign (‘+’) immediately following a character or class indicates that the preceding item must occur 1 or more times to match:

'Jujube' similar to 'Ju_+'                     -- true
'Jujube' similar to 'Ju+jube'                  -- true
'Jujube' similar to 'Jujuber+'                 -- false
'Jujube' similar to 'J[jux]+be'                -- true
'Jujube' sililar to 'J[[:DIGIT:]]+ujube'       -- false

If a character or class is followed by a number enclosed in braces (‘{’ and ‘}’), it must be repeated exactly that number of times to match:

'Kiwi' similar to 'Ki{2}wi'                    -- false
'Kiwi' similar to 'K[ipw]{2}i'                 -- true
'Kiwi' similar to 'K[ipw]{2}'                  -- false
'Kiwi' similar to 'K[ipw]{3}'                  -- true

If the number is followed by a comma (‘,’), the item must be repeated at least that number of times to match:

'Limone' similar to 'Li{2,}mone'               -- false
'Limone' similar to 'Li{1,}mone'               -- true
'Limone' similar to 'Li[nezom]{2,}'            -- true

If the braces contain two numbers separated by a comma, the second number not smaller than the first, then the item must be repeated at least the first number and at most the second number of times to match:

'Mandarijn' similar to 'M[a-p]{2,5}rijn'       -- true
'Mandarijn' similar to 'M[a-p]{2,3}rijn'       -- false
'Mandarijn' similar to 'M[a-p]{2,3}arijn'      -- true

The quantifiers ‘?’, ‘*’ and ‘+’ are shorthand for {0,1}, {0,} and {1,}, respectively.

OR-ing Terms

Regular expression terms can be OR’ed with the ‘|’ operator.A match is made when the argument string matches at least one of the terms:

'Nektarin' similar to 'Nek|tarin'              -- false
'Nektarin' similar to 'Nektarin|Persika'       -- true
'Nektarin' similar to 'M_+|N_+|P_+'            -- true

Subexpressions

One or more parts of the regular expression can be grouped into subexpressions (also called subpatterns) by placing them between parentheses (‘(’ and ‘)’).A subexpression is a regular expression in its own right.It can contain all the elements allowed in a regular expression, and can also have quantifiers added to it.

'Orange' similar to 'O(ra|ri|ro)nge'           -- true
'Orange' similar to 'O(r[a-e])+nge'            -- true
'Orange' similar to 'O(ra){2,4}nge'            -- false
'Orange' similar to 'O(r(an|in)g|rong)?e'      -- true

`IS [NOT] DISTINCT FROM`

Syntax

<operand1> IS [NOT] DISTINCT FROM <operand2>

Two operands are considered DISTINCT (different) if they have a different value or if one of them is NULL and the other non-null.They are considered NOT DISTINCT (equal) if they have the same value or if both of them are NULL.

IS [NOT] DISTINCT FROM always returns TRUE or FALSE and never UNKNOWN (NULL) (unknown value).Operators ‘=’ and ‘<>’, conversely, will return UNKNOWN (NULL) if one or both operands are NULL.

Table 1. Results of Various Comparison Predicates
Operand values	Result of various predicates
Operand values	`=`	`IS NOT DISTINCT FROM`	`<>`	`IS DISTINCT FROM`
Same value	`TRUE`	`TRUE`	`FALSE`	`FALSE`
Different values	`FALSE`	`FALSE`	`TRUE`	`TRUE`
Both `NULL`	`UNKNOWN`	`TRUE`	`UNKNOWN`	`FALSE`
One `NULL`, one non-`NULL`	`UNKNOWN`	`FALSE`	`UNKNOWN`	`TRUE`

Examples

SELECT ID, NAME, TEACHER
FROM COURSES
WHERE START_DAY IS NOT DISTINCT FROM END_DAY;

-- PSQL fragment
IF (NEW.JOB IS DISTINCT FROM OLD.JOB)
THEN POST_EVENT 'JOB_CHANGED';

Boolean `IS [NOT]`

Syntax

<value> IS [NOT] { TRUE | FALSE | UNKNOWN }

The IS predicate with Boolean literal values checks if the expression on the left side matches the Boolean value on the right side.The expression on the left side must be of type BOOLEAN, otherwise an exception is raised.

The IS [NOT] UNKNOWN is equivalent to IS [NOT] NULL.

Note	The right side of the predicate only accepts the literals `TRUE`, `FALSE`, `UNKNOWN`, and `NULL`.It does not accept expressions.

Using the IS predicate with a Boolean data type

-- Checking FALSE value
SELECT * FROM TBOOL WHERE BVAL IS FALSE;

ID            BVAL
============= =======
2             <false>

-- Checking UNKNOWN value
SELECT * FROM TBOOL WHERE BVAL IS UNKNOWN;

ID            BVAL
============= =======
3             <null>

See also

[fblangref50-commons-isnotnull]

`IS [NOT] NULL`

Syntax

<value> IS [NOT] NULL

Since NULL is not a value, these operators are not comparison operators.The IS [NOT] NULL predicate tests that the expression on the left side has a value (IS NOT NULL) or has no value (IS NULL).

Example

Search for sales entries that have no shipment date set for them:

SELECT * FROM SALES
WHERE SHIP_DATE IS NULL;

Note	Note regarding the `IS` predicates The `IS` predicates take precedence above the others.

Existential Predicates

This group of predicates includes those that use subqueries to submit values for all kinds of assertions in search conditions.Existential predicates are so called because they use various methods to test for the existence or non-existence of some condition, returning TRUE if the existence or non-existence is confirmed or FALSE otherwise.

`EXISTS`

Syntax

[NOT] EXISTS (<select_stmt>)

The EXISTS predicate uses a subquery expression as its argument.It returns TRUE if the subquery result contains at least one row, otherwise it returns FALSE.

NOT EXISTS returns FALSE if the subquery result contains at least one row, otherwise it returns TRUE.

Note	The subquery can specify multiple columns, or `SELECT *`, because the evaluation is made on the number of rows that match its criteria, not on the data.

Examples

Find those employees who have projects.

SELECT *
FROM employee
WHERE EXISTS(SELECT *
             FROM  employee_project ep
             WHERE ep.emp_no = employee.emp_no)

Find those employees who have no projects.

SELECT *
FROM employee
WHERE NOT EXISTS(SELECT *
                 FROM employee_project ep
                 WHERE ep.emp_no = employee.emp_no)

`IN`

Syntax

<value> [NOT] IN (<select_stmt> | <value_list>)

<value_list> ::= <value_1> [, <value_2> ...]

The IN predicate tests whether the value of the expression on the left side is present in the set of values specified on the right side.The set of values cannot have more than 65535 items.The IN predicate can be replaced with the following equivalent forms:

(<value> = <value_1> [OR <value> = <value_2> ...])

<value> = { ANY | SOME } (<select_stmt>)

When the IN predicate is used in the search conditions of DML queries, the Firebird optimizer can use an index on the searched column, if a suitable one exists.Lists that are known to be constant are pre-evaluated as invariants and cached as a binary search tree, making comparisons faster if the condition needs to be tested for many rows or if the value list is long.

In its second form, the IN predicate tests whether the value of the expression on the left side is present — or not present, if NOT IN is used — in the result of the subquery on the right side.

The subquery must specify only one column, otherwise the error “count of column list and variable list do not match” will occur.

Queries using an IN predicate with a subquery can be replaced with a similar query using the EXISTS predicate.For example, the following query:

SELECT
  model, speed, hd
FROM PC
WHERE
model IN (SELECT model
          FROM product
          WHERE maker = 'A');

can be replaced with a similar one using the EXISTS predicate:

SELECT
  model, speed, hd
FROM PC
WHERE
 EXISTS (SELECT *
         FROM product
         WHERE maker = 'A'
           AND product.model = PC.model);

However, a query using NOT IN with a subquery does not always give the same result as its NOT EXISTS counterpart.The reason is that EXISTS always returns TRUE or FALSE, whereas IN returns NULL in one of these two cases:

when the test value is NULL and the IN () list is not empty
when the test value has no match in the IN () list and at least one list element is NULL

It is in only these two cases that IN () will return NULL while the EXISTS predicate will return FALSE (“no matching row found”).In a search or, for example, an IF (…) statement, both results mean “failure”, and it makes no difference to the outcome.

For the same data, NOT IN () will return NULL, while NOT EXISTS will return TRUE, leading to opposite results.

As an example, suppose you have the following query:

-- Looking for people who were not born
-- on the same day as any famous New York citizen
SELECT P1.name AS NAME
FROM Personnel P1
WHERE P1.birthday NOT IN (SELECT C1.birthday
                          FROM Celebrities C1
                          WHERE C1.birthcity = 'New York');

Now, assume that the NY celebrities list is not empty and contains at least one NULL birthday.Then for every citizen who does not share his birthday with a NY celebrity, NOT IN will return NULL, because that is what IN does.The search condition is thereby not satisfied and the citizen will be left out of the SELECT result, which is wrong.

For citizens whose birthday does match with a celebrity’s birthday, NOT IN will correctly return FALSE, so they will be left out too, and no rows will be returned.

If the NOT EXISTS form is used:

-- Looking for people who were not born
-- on the same day as any famous New York citizen
SELECT P1.name AS NAME
FROM Personnel P1
WHERE NOT EXISTS (SELECT *
                  FROM Celebrities C1
                  WHERE C1.birthcity = 'New York'
                    AND C1.birthday = P1.birthday);

non-matches will have a NOT EXISTS result of TRUE and their records will be in the result set.

Tip	If there is any chance of `NULL`s being encountered when searching for a non-match, you will want to use `NOT EXISTS`.

Examples of use

Find employees with the names “Pete”, “Ann” and “Roger”:

SELECT *
FROM EMPLOYEE
WHERE FIRST_NAME IN ('Pete', 'Ann', 'Roger');

Find all computers that have models whose manufacturer starts with the letter “A”:

SELECT
  model, speed, hd
FROM PC
WHERE
  model IN (SELECT model
            FROM product
            WHERE maker STARTING WITH 'A');

See also

EXISTS

`SINGULAR`

Syntax

[NOT] SINGULAR (<select_stmt>)

The SINGULAR predicate takes a subquery as its argument and evaluates it as TRUE if the subquery returns exactly one row, otherwise the predicate is evaluated as FALSE.The subquery may list several output columns since the rows are not returned anyway, they are only tested for (singular) existence.For brevity, people usually specify ‘SELECT *’.The SINGULAR predicate can return only two values: TRUE or FALSE.

Example

Find those employees who have only one project.

SELECT *
FROM employee
WHERE SINGULAR(SELECT *
               FROM employee_project ep
               WHERE ep.emp_no = employee.emp_no)

Quantified Subquery Predicates

A quantifier is a logical operator that sets the number of objects for which this condition is true.It is not a numeric quantity, but a logical one that connects the condition with the full set of possible objects.Such predicates are based on logical universal and existential quantifiers that are recognised in formal logic.

In subquery expressions, quantified predicates make it possible to compare separate values with the results of subqueries;they have the following common form:

<value expression> <comparison operator> <quantifier> <subquery>

`ALL`

Syntax

<value> <op> ALL (<select_stmt>)

When the ALL quantifier is used, the predicate is TRUE if every value returned by the subquery satisfies the condition in the predicate of the main query.

Example

Show only those clients whose ratings are higher than the rating of every client in Paris.

SELECT c1.*
FROM Customers c1
WHERE c1.rating > ALL
      (SELECT c2.rating
       FROM Customers c2
       WHERE c2.city = 'Paris')

Important

If the subquery returns an empty set, the predicate is TRUE for every left-side value, regardless of the operator.This may appear to be contradictory, because every left-side value will thus be considered both smaller and greater than, both equal to and unequal to, every element of the right-side stream.

Nevertheless, it aligns perfectly with formal logic: if the set is empty, the predicate is true for every row in the set.

`ANY` and `SOME`

Syntax

<value> <op> {ANY | SOME} (<select_stmt>)

The quantifiers ANY and SOME are identical in their behaviour.Both are specified in the SQL standard, and they be used interchangeably to improve the readability of operators.When the ANY or the SOME quantifier is used, the predicate is TRUE if any of the values returned by the subquery satisfies the condition in the predicate of the main query.If the subquery returns no rows at all, the predicate is automatically considered as FALSE.

Example

Show only those clients whose ratings are higher than those of one or more clients in Rome.

SELECT *
FROM Customers
WHERE rating > ANY
      (SELECT rating
       FROM Customers
       WHERE city = 'Rome')

BETWEEN

BETWEEN

LIKE

docnext count = 25

Wildcards

Using the ESCAPE Character Option

Examples using LIKE

STARTING WITH

CONTAINING

SIMILAR TO

Escaping Special Characters

Syntax: SQL Regular Expressions

Building Regular Expressions

Characters

Wildcards

Character Classes

Predefined Character Classes

Quantifiers

OR-ing Terms

Subexpressions

IS [NOT] DISTINCT FROM

Boolean IS [NOT]

IS [NOT] NULL

Existential Predicates

EXISTS

IN

SINGULAR

Quantified Subquery Predicates

ALL

ANY and SOME

`BETWEEN`

`LIKE`

Using the `ESCAPE` Character Option

Examples using `LIKE`

`STARTING WITH`

`CONTAINING`

`SIMILAR TO`

`IS [NOT] DISTINCT FROM`

Boolean `IS [NOT]`

`IS [NOT] NULL`

`EXISTS`

`IN`

`SINGULAR`

`ALL`

`ANY` and `SOME`