FirebirdSQL logo
  • Anglaiskeyboard_arrow_down
  • Search
 Data Types and SubtypesData Definition (DDL) Statements 

Expressions

SQL expressions provide formal methods for evaluating, transforming and comparing values.SQL expressions may include table columns, variables, constants, literals, various statements and predicates and also other expressions.The complete list of possible tokens in expressions follows.

Description of Expression Elements
Column name

Identifier of a column from a specified table used in evaluations or as a search condition.A column of the array type cannot be an element in an expression except when used with the IS [NOT] NULL predicate.

Array element

An expression may contain a reference to an array member i.e., <array_name>[s], where s is the subscript of the member in the array <array_name>

Arithmetic operators

The +, -, *, / characters used to calculate values

Concatenation operator

The || (“double-pipe”) operator used to concatenate strings

Logical operators

The reserved words NOT, AND and OR, used to combine simple search conditions to create complex conditions

Comparison operators

The symbols =, <>, !=, ~=, ^=, <, <=, >, >=, !<, ~<, ^<, !>, ~> and ^>

Comparison predicates

[fblangref50-commons-predlike], [fblangref50-commons-predstartwith], [fblangref50-commons-predcontaining], [fblangref50-commons-predsimilarto], [fblangref50-commons-predbetween], [fblangref50-commons-isnotnull], IS [NOT] {TRUE | FALSE | UNKNOWN} and [fblangref50-commons-isnotdistinct]

Existential predicates

Predicates used to check the existence of values in a set.The IN predicate can be used both with sets of comma-separated constants and with subqueries that return a single column.The [fblangref50-commons-exists], [fblangref50-commons-singular], [fblangref50-commons-quant-all], [fblangref50-commons-quant-anysome] predicates can be used only with sub-queries.

Constant or Literal

Numbers, or string literals enclosed in apostrophes or Q-strings, Boolean values TRUE, FALSE and UNKOWN, NULL

Datetime literal

An expression, similar to a string literal enclosed in apostrophes, that can be interpreted as a date, time or timestamp value.Datetime literals can be strings of characters and numerals, such as TIMESTAMP '25.12.2016 15:30:35', that can be resolved as datetime value.

Datetime mnemonics

A string literal with a description of a desired datetime value that can be cast to a datetime type.For example 'TODAY', 'NOW'.

Context variable

An internally-defined context variable

Local variable

Declared local variable, input or output parameter of a PSQL module (stored procedure, stored function, trigger, or unnamed PSQL block in DSQL)

Positional parameter

A member of an ordered group of one or more unnamed parameters passed to a stored procedure or prepared query

Subquery

A SELECT statement enclosed in parentheses that returns a single (scalar) value or, when used in existential predicates, a set of values

Function identifier

The identifier of an internal, packaged, stored or external function in a function expression

Type cast

An expression explicitly converting data of one data type to another using the CAST function (CAST (<value> AS <datatype>)).For datetime literals only, the shorthand syntax <datatype> <value> is also supported (DATE '2016-12-25').

Conditional expression

Expressions using CASE and related internal functions

Parentheses

Bracket pairs (…​) used to group expressions.Operations inside the parentheses are performed before operations outside them.When nested parentheses are used, the most deeply nested expressions are evaluated first and then the evaluations move outward through the levels of nesting.

COLLATE clause

Clause applied to CHAR and VARCHAR types to specify the character-set-specific collation to use in string comparisons

NEXT VALUE FOR sequence

Expression for obtaining the next value of a specified generator (sequence).The internal function GEN_ID() does the same.

AT expression

Expression to change the time zone of a datetime.

Literals (Constants)

A literal — or constant — is a value that is supplied directly in an SQL statement, not derived from an expression, a parameter, a column reference nor a variable.It can be a string or a number.

docnext count = 58

String Literals

A string literal is a series of characters enclosed between a pair of apostrophes (“single quotes”).The maximum length of a string literal is 32,765 for CHAR/VARCHAR, or 65,533 bytes for BLOB;the maximum character count will be determined by the number of bytes used to encode each character.

Formally, the syntax of a normal string literal is:

Character String Literal Syntax
<char-literal> ::=
  [<introducer> charset-name] <quote> [<char>...] <quote>
  [{ <separator> <quote> [<char>...] <quote> }... ]

<separator> ::=
  { <comment> | <white space> }

<introducer> ::= underscore (U+005F)
<quote> ::= apostrophe (U+0027)
<char> ::= character representation;
           apostrophe is escaped by doubling
Note

  • Double quotes are not valid for quoting strings.The SQL standard reserves double quotes for a different purpose: delimiting or quoting identifiers.

  • If a literal apostrophe is required within a string constant, it is “escaped” by prefixing it with another apostrophe.For example, 'Mother O''Reilly''s home-made hooch'.Or use the alternative quote literal: q'{Mother O'Reilly's home-made hooch}'

  • Care should be taken with the string length if the value is to be written to a CHAR or VARCHAR column.The maximum length for a CHAR or VARCHAR literal is 32,765 bytes.

The character set of a string constant is assumed to be the same as the character set of its destined storage.

Examples
-- Literal containing single quote
select 'O''Reilly' from RDB$DATABASE;
-- output: O'Reilly
-- whitespace between literal
select 'ab'
       'cd'
from RDB$DATABASE;
-- output: abcd
-- comment and whitespace between literal
select 'ab' /* comment */ 'cd'
from RDB$DATABASE;
-- output: abcd
String Literals in Hexadecimal Notation

String literals can also be entered in hexadecimal notation, so-called “binary strings”.Each pair of hex digits defines one byte in the string.Strings entered this way will be type BINARY (a.k.a. CHAR CHARACTER SET OCTETS) by default, unless the introducer syntax is used to force a string to be interpreted as another character set.

Binary String Literal Syntax
<binary-literal> ::=
  [<introducer> charsetname] X <quote> [<space>...]
  [{ <hexit> [<space>...] <hexit> [<space>...] }...] <quote>
  [{ <separator> <quote> [<space>...]
     [{ <hexit> [<space>...] <hexit> [<space>...] }...] <quote> }...]

<hexdigit> ::= one of 0..9, A..F, a..f
<space> ::= the space character (U+0020)

!! For further rules, see [fblangref50-char-literal-syntax] !!
Examples
select x'4E657276656E' from rdb$database
-- returns 4E657276656E, a 6-byte 'binary' string

select _ascii x'4E657276656E' from rdb$database
-- returns 'Nerven' (same string, now interpreted as ASCII text)

select _iso8859_1 x'53E46765' from rdb$database
-- returns 'Säge' (4 chars, 4 bytes)

select _utf8 x'53C3A46765' from rdb$database
-- returns 'Säge' (4 chars, 5 bytes)

-- Group per byte (whitespace inside literal)
select _win1252 x'42 49 4e 41 52 59'
from RDB$DATABASE;
-- output: BINARY

-- whitespace between literal
select _win1252 x'42494e'
                 '415259'
from RDB$DATABASE;
-- output: BINARY
Note
Notes

The client interface determines how binary strings are displayed to the user.The isql utility, for example, uses upper case letters A-F, while FlameRobin uses lower case letters.Other client programs may use other conventions, such as displaying spaces between the byte pairs: '4E 65 72 76 65 6E'.

The hexadecimal notation allows any byte value (including 00) to be inserted at any position in the string.However, if you want to coerce it to anything other than OCTETS, it is your responsibility to supply the bytes in a sequence that is valid for the target character set.

The usage of the _win1252 introducer in above example is a non-standard extension and equivalent to an explicit cast to a CHAR of appropriate length with character set WIN1252.
Alternative String Literals

It is possible to use a character, or character pair, other than the doubled (escaped) apostrophe, to embed a quoted string inside another string without the need to escape the quote.The keyword q or Q preceding a quoted string informs the parser that certain left-right pairs or pairs of identical characters within the string are the delimiters of the embedded string literal.

Syntax
<alternative string literal> ::=
    { q | Q } <quote> <start char> [<char> ...] <end char> <quote>
Note
Rules

When <start char> is ‘(’, ‘{’, ‘[’ or ‘<’, <end char> is paired up with its respective “partner”, viz. ‘)’, ‘}’, ‘]’ and ‘>’.In other cases, <end char> is the same as <start char>.

Inside the string, i.e. <char> items, single quotes can be used without escaping.Each quote will be part of the result string.
Examples
select q'{abc{def}ghi}' from rdb$database;        -- result: abc{def}ghi
select q'!That's a string!' from rdb$database;    -- result: That's a string
Introducer Syntax for String Literals

If necessary, a string literal may be preceded by a character set name, itself prefixed with an underscore “_”.This is known as introducer syntax.Its purpose is to inform the engine about how to interpret and store the incoming string.

Example

INSERT INTO People
VALUES (_ISO8859_1 'Hans-Jörg Schäfer')

Number Literals

A number literal is any valid number in a supported notation:

  • In SQL, for numbers in the standard decimal notation, the decimal point is always represented by period character (‘.’, full-stop, dot);thousands are not separated.Inclusion of commas, blanks, etc. will cause errors.

  • Exponential notation is supported.For example, 0.0000234 can be expressed as 2.34e-5.However, while the literal 0.0000234 is a NUMERIC(18,7), the literal 2.34e-5 is a DOUBLE PRECISION.

  • Hexadecimal notation — see below.

The format of the literal decides the type (<d> for a decimal digit, <h> for a hexadecimal digit):

Format Type

<d>[<d> …​]

INTEGER, BIGINT, INT128 or DECFLOAT(34) (depends on if value fits in the type).DECFLOAT(34) is used for values that do not fit in INT128.

0{x|X} <h>[<h> …​]

INTEGER for 1-8 <h>, or BIGINT for 9-16 <h>, INT128 for 17-32 <h>

<d>[<d> …​] "." [<d> …​]

NUMERIC(18, n), NUMERIC(38, n) or DECFLOAT(34) where n depends on the number of digits after the decimal point, and precision on the total number of digits.

For backwards compatibility, some values of 19 digits are mapped to NUMERIC(18, n).DECFLOAT(34) is used when the unscaled value does not fit in INT128.

<d>[<d> …​]["." [<d> …​]] E <d>[<d> …​]

DOUBLE PRECISION or DECFLOAT(34), where DECFLOAT is used only if the number of digits is 20 or higher, or the absolute exponent is 309 or greater.
Hexadecimal Notation for Numbers

Integer values can also be entered in hexadecimal notation.Numbers with 1-8 hex digits will be interpreted as type INTEGER;numbers with 9-16 hex digits as type BIGINT;numbers with 17-32 hex digits as type INT128.

Syntax
0{x|X}<hexdigits>

<hexdigits>  ::=  1-32 of <hexdigit>
<hexdigit>   ::=  one of 0..9, A..F, a..f
Examples
select 0x6FAA0D3 from rdb$database           -- returns 117088467
select 0x4F9 from rdb$database               -- returns 1273
select 0x6E44F9A8 from rdb$database          -- returns 1850014120
select 0x9E44F9A8 from rdb$database          -- returns -1639646808 (an INTEGER)
select 0x09E44F9A8 from rdb$database         -- returns 2655320488 (a BIGINT)
select 0x28ED678A4C987 from rdb$database     -- returns 720001751632263
select 0xFFFFFFFFFFFFFFFF from rdb$database  -- returns -1
Hexadecimal Value Ranges

  • Hex numbers in the range 0 …​ 7FFF FFFF are positive INTEGERs with values between 0 …​ 2147483647 decimal.To coerce a number to BIGINT, prepend enough zeroes to bring the total number of hex digits to nine or above.That changes the type but not the value.

  • Hex numbers between 8000 0000 …​ FFFF FFFF require some attention:

    • When written with eight hex digits, as in 0x9E44F9A8, a value is interpreted as 32-bit INTEGER.Since the leftmost bit (sign bit) is set, it maps to the negative range -2147483648 …​ -1 decimal.

    • With one or more zeroes prepended, as in 0x09E44F9A8, a value is interpreted as 64-bit BIGINT in the range 0000 0000 8000 0000 …​ 0000 0000 FFFF FFFF.The sign bit is not set now, so they map to the positive range 2147483648 …​ 4294967295 decimal.

    Thus, in this range, and for 16 vs 16+ digits, prepending a mathematically insignificant 0 results in a different value.This is something to be aware of.

  • Hex numbers between 0 0000 0001 …​ 7FFF FFFF FFFF FFFF are all positive BIGINT.

  • Hex numbers between 8000 0000 0000 0000 …​ FFFF FFFF FFFF FFFF are all negative BIGINT.

  • Hex numbers between 0 0000 0000 0000 0001 …​ 7FFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF are all positive INT128

  • Hex numbers between 8000 0000 0000 0000 0000 0000 0000 0000 …​ FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF are all negative INT128

  • A SMALLINT cannot be written in hex, strictly speaking, since even 0x0 and 0x1 are evaluated as INTEGER.However, if you write a positive integer within the 16-bit range 0x0000 (decimal zero) to 0x7FFF (decimal 32767) it will be converted to SMALLINT transparently.

    It is possible to write to a negative SMALLINT in hex, using a 4-byte hex number within the range 0xFFFF8000 (decimal -32768) to 0xFFFFFFFF (decimal -1).

Boolean Literals

A Boolean literal is one of TRUE, FALSE or UNKNOWN.

Datetime Literals

Formally, the SQL standard defines datetime literals as a prefix DATE, TIME and TIMESTAMP followed by a string literal with a datetime format.Historically, Firebird documentation has referred to these datetime literals as “shorthand casts”.

Since Firebird 4.0, the use of datetime mnemonics in datetime literals (e.g. DATE 'TODAY') is no longer allowed.

Caution

The format of datetime literals and strings in Firebird 4.0 and higher is more strict compared to earlier Firebird versions.
Datetime Literal Syntax
<datetime_literal> ::=
    DATE '<date_format>'
  | TIME { '<time_format>' | '<time_tz_format>' }
  | TIMESTAMP { '<timestamp_format>' | '<timestamp_tz_format>' }
Datetime Format Syntax
<date_format> ::=
      [YYYY<p>]MM<p>DD
    | MM<p>DD[<p>{ YYYY | YY }]
    | DD<p>MM[<p>{ YYYY | YY }]

<time_format> ::= HH[:mm[:SS[<f>NNNN]]]

<timestamp_format> ::= <date_format> [<space> <time_format>]

<time_zone> ::=
    { + | - }HH:MM
  | time zone name (e.g. Europe/Berlin)

<time_tz_format> ::= <time_format> [<space>] <time_zone>

<timestamp_tz_format> ::= <timestamp_format> [<space>] <time_zone>

<p> ::= whitespace | . | - | /
<f> ::= : | .
Table 1. Date and Time Literal Format Arguments
Argument Description

datetime_literal

Datetime literal

date_format

Format of date

time_format

Format of time

timestamp_format

Format of timestamp

time_zone

Format of time zone

time_tz_format

Format of time with time zone

timestamp_tz_format

Format of timestamp with time zone

YYYY

Four-digit year

YY

Two-digit year

MM

MonthIt may contain 1 or 2 digits (1-12 or 01-12).You can also specify the three-letter shorthand name or the full name of a month in English.Case-insensitive

DD

Day.It may contain 1 or 2 digits (1-31 or 01-31)

HH

Hour.It may contain 1 or 2 digits (0-23 or 00-23)

mm

Minutes.It may contain 1 or 2 digits (0-59 or 00-59)

SS

Seconds.It may contain 1 or 2 digits (0-59 or 00-59)

NNNN

Ten-thousandths of a second.It may contain from 1 to 4 digits (0-9999)

p

A date separator, any of permitted characters.Leading and trailing spaces are ignored.The choice of separator in a date decides whether the parser reads MM<p>DD or DD<p>MM.

f

Fractional seconds separator
Important

Use of the complete specification of the year in the four-digit form — YYYY — is strongly recommended, to avoid confusion in date calculations and aggregations.
Example
-- 1
  UPDATE PEOPLE
  SET AGECAT = 'SENIOR'
  WHERE BIRTHDATE < DATE '1-Jan-1943';
-- 2
  INSERT INTO APPOINTMENTS
  (EMPLOYEE_ID, CLIENT_ID, APP_DATE, APP_TIME)
  VALUES (973, 8804, DATE '1-Jan-2021' + 2, TIME '16:00');
-- 3
  NEW.LASTMOD = TIMESTAMP '1-Jan-2021 16:00';
Tip

Although the Firebird datetime syntax is flexible, to avoid ambiguity we recommend using the ISO-8601 order (year-month-day), ‘-’ as the date separator, 4 digits for year, 2 digits for month, day, minute and second, : as the time separator, and ‘.’ as second.fractions separator.This format is also the only one defined in the SQL standard.

In short, use TIMESTAMP '2021-05-03 04:05:00.1 +02:00', not TIMESTAMP '3.5.21 4:5:0:1 +2:0'.

SQL Operators

SQL operators comprise operators for comparing, calculating, evaluating and concatenating values.

Operator Precedence

SQL Operators are divided into four types.Each operator type has a precedence, a ranking that determines the order in which operators and the values obtained with their help are evaluated in an expression.The higher the precedence of the operator type is, the earlier it will be evaluated.Each operator has its own precedence within its type, that determines the order in which they are evaluated in an expression.

Operators with the same precedence are evaluated from left to right.To force a different evaluation order, operations can be grouped by means of parentheses.

Table 1. Operator Type Precedence
Operator Type Precedence Explanation

Concatenation

1

Strings are concatenated before any other operations take place

Arithmetic

2

Arithmetic operations are performed after strings are concatenated, but before comparison and logical operations

Comparison

3

Comparison operations take place after string concatenation and arithmetic operations, but before logical operations

Logical

4

Logical operators are executed after all other types of operators
Concatenation Operator

The concatenation operator — two pipe characters known as “double pipe” or ‘||’ — concatenates two character strings to form a single string.Character strings can be literals or values obtained from columns or other expressions.

Example
SELECT LAST_NAME || ', ' || FIRST_NAME AS FULL_NAME
FROM EMPLOYEE
See also

BLOB_APPEND()

Arithmetic Operators
Table 1. Arithmetic Operator Precedence
Operator Purpose Precedence

+signed_number

Unary plus

1

-signed_number

Unary minus

1

*

Multiplication

2

/

Division

2

+

Addition

3

-

Subtraction

3
Example
UPDATE T
    SET A = 4 + 1/(B-C)*D
Note

Where operators have the same precedence, they are evaluated in left-to-right sequence.
Comparison Operators
Table 1. Comparison Operator Precedence
Operator Purpose Precedence

IS

Checks that the expression on the left is (not) NULL or the Boolean value on the right

1

=

Is equal to, is identical to

2

<>, !=, ~=, ^=

Is not equal to

2

>

Is greater than

2

<

Is less than

2

>=

Is greater than or equal to

2

<=

Is less than or equal to

2

!>, ~>, ^>

Is not greater than

2

!<, ~<, ^<

Is not less than

2

This group also includes comparison predicates BETWEEN, LIKE, CONTAINING, SIMILAR TO and others.

Example
IF (SALARY > 1400) THEN
...
See also

Other Comparison Predicates.

Logical Operators
Table 1. Logical Operator Precedence
Operator Purpose Precedence

NOT

Negation of a search condition

1

AND

Combines two or more predicates, each of which must be true for the entire predicate to be true

2

OR

Combines two or more predicates, of which at least one predicate must be true for the entire predicate to be true

3
Example
IF (A < B OR (A > C AND A > D) AND NOT (C = D)) THEN ...

NEXT VALUE FOR

Result type

BIGINT — dialect 2 and 3
INTEGER — dialect 1

Syntax
NEXT VALUE FOR sequence-name

NEXT VALUE FOR returns the next value of a sequence.Sequence is the SQL-standard term for what is historically called a generator in Firebird and its ancestor, InterBase.The NEXT VALUE FOR operator is equivalent to the legacy GEN_ID (…​, increment) function with increment the increment stored in the metadata of the sequence.It is the recommended syntax for retrieving the next sequence value.

Note

Unlike the GEN_ID function, the NEXT VALUE FOR expression does not take any parameters and thus provides no way to retrieve the current value of a sequence, nor to step the next value by a different value than the increment configured for the sequence.GEN_ID (…​, <step value>) is still needed for these tasks.A step value of 0 returns the current sequence value.

The increment of a sequence can be configured with the INCREMENT clause of CREATE SEQUENCE or ALTER SEQUENCE.

In dialect 1, the result type is INTEGER, in dialect 2 and 3 it is BIGINT.
Example
NEW.CUST_ID = NEXT VALUE FOR CUSTSEQ;
See also

SEQUENCE (GENERATOR), GEN_ID()

AT Time Zone Expression

Syntax
<at expr> ::= <expr> AT { TIME ZONE <time zone string> | LOCAL }

The AT expression expresses a datetime value in a different time zone, while keeping the same UTC instant.

AT translates a time/timestamp value to its corresponding value in another time zone.If LOCAL is used, the value is converted to the session time zone.

When expr is a WITHOUT TIME ZONE type, expr is first converted to a WITH TIME ZONE in the session time zone and then transformed to the specified time zone.

Examples
select time '12:00 GMT' at time zone '-03:00' from rdb$database;
select current_timestamp at time zone 'America/Sao_Paulo' from rdb$database;
select timestamp '2018-01-01 12:00 GMT' at local from rdb$database;

Conditional Expressions

A conditional expression is one that returns different values according to how a certain condition is met.It is composed by applying a conditional function construct, of which Firebird supports several.This section describes only one conditional expression construct: CASE.All other conditional expressions apply internal functions derived from CASE and are described in Conditional Functions.

CASE

The CASE construct returns a single value from a number of possible values.Two syntactic variants are supported:

  • The simple CASE, comparable to a case construct in Pascal or a switch in C

  • The searched CASE, which works like a series of “if …​ else if …​ else if” clauses.

Simple CASE
Syntax
...
CASE <test-expr>
  WHEN <expr> THEN <result>
  [WHEN <expr> THEN <result> ...]
  [ELSE <defaultresult>]
END
...

When this variant is used, test-expr is compared to the first expr, second expr and so on, until a match is found, and the corresponding result is returned.If no match is found, defaultresult from the optional ELSE clause is returned.If there are no matches and no ELSE clause, NULL is returned.

The matching works as the “=” operator.That is, if test-expr is NULL, it does not match any expr, not even an expression that resolves to NULL.

The returned result does not have to be a literal value: it might be a field or variable name, compound expression or NULL literal.

Example
SELECT
  NAME,
  AGE,
  CASE UPPER(SEX)
    WHEN 'M' THEN 'Male'
    WHEN 'F' THEN 'Female'
    ELSE 'Unknown'
  END GENDER,
RELIGION
    FROM PEOPLE

A short form of the simple CASE construct is the DECODE function.

Searched CASE
Syntax
CASE
  WHEN <bool_expr> THEN <result>
  [WHEN <bool_expr> THEN <result> ...]
  [ELSE <defaultresult>]
END

The bool_expr expression is one that gives a ternary logical result: TRUE, FALSE or NULL.The first expression to return TRUE determines the result.If no expressions return TRUE, defaultresult from the optional ELSE clause is returned as the result.If no expressions return TRUE and there is no ELSE clause, the result will be NULL.

As with the simple CASE construct, the result need not be a literal value: it might be a field or variable name, a compound expression, or be NULL.

Example
CANVOTE = CASE
  WHEN AGE >= 18 THEN 'Yes'
  WHEN AGE < 18 THEN 'No'
  ELSE 'Unsure'
END

NULL in Expressions

NULL is not a value in SQL, but a state indicating that the value of the element either is unknown or it does not exist.It is not a zero, nor a void, nor an “empty string”, and it does not act like any value.

When you use NULL in numeric, string or date/time expressions, the result will always be NULL.When you use NULL in logical (Boolean) expressions, the result will depend on the type of the operation and on other participating values.When you compare a value to NULL, the result will be unknown.

Important

In SQL, the logical result unknown is also represented by NULL.

Consult theFirebird Null Guidefor more in-depth coverage of Firebird’s NULL behaviour.

Expressions Returning NULL

Expressions in this list will always return NULL:

1 + 2 + 3 + NULL
'Home ' || 'sweet ' || NULL
MyField = NULL
MyField <> NULL
NULL = NULL
not (NULL)

If it seems difficult to understand why, remember that NULL is a state that stands for “unknown”.

NULL in Logical Expressions

It has already been shown that NOT (NULL) results in NULL.The interaction is a bit more complicated for the logical AND and logical OR operators:

NULL or false  → NULL
NULL or true   → true
NULL or NULL   → NULL
NULL and false → false
NULL and true  → NULL
NULL and NULL  → NULL
Tip

As a basic rule-of-thumb, if substituting TRUE for NULL produces a different result than substituting FALSE, the outcome of the original expression is unknown, or NULL.
Examples
(1 = NULL) or (1 <> 1)    -- returns NULL
(1 = NULL) or FALSE       -- returns NULL
(1 = NULL) or (1 = 1)     -- returns TRUE
(1 = NULL) or TRUE        -- returns TRUE
(1 = NULL) or (1 = NULL)  -- returns NULL
(1 = NULL) or UNKNOWN     -- returns NULL
(1 = NULL) and (1 <> 1)   -- returns FALSE
(1 = NULL) and FALSE      -- returns FALSE
(1 = NULL) and (1 = 1)    -- returns NULL
(1 = NULL) and TRUE       -- returns NULL
(1 = NULL) and (1 = NULL) -- returns NULL
(1 = NULL) and UNKNOWN    -- returns NULL

Subqueries

A subquery is a special form of expression that is a query embedded within another query.Subqueries are written in the same way as regular SELECT queries, but they must be enclosed in parentheses.Subquery expressions can be used in the following ways:

  • To specify an output column in the SELECT list

  • To obtain values or conditions for search predicates (the WHERE, HAVING clauses).

  • To produce a set that the enclosing query can select from, as though were a regular table or view.Subqueries like this appear in the FROM clause (derived tables) or in a Common Table Expression (CTE)

Correlated Subqueries

A subquery can be correlated.A query is correlated when the subquery and the main query are interdependent.To process each record in the subquery, it is necessary to fetch a record in the main query, i.e. the subquery fully depends on the main query.

Sample Correlated Subquery
SELECT *
FROM Customers C
WHERE EXISTS
  (SELECT *
   FROM Orders O
   WHERE C.cnum = O.cnum
     AND O.adate = DATE '10.03.1990');

When subqueries are used to get the values of the output column in the SELECT list, a subquery must return a scalar result (see below).

Scalar Results

Subqueries used in search predicates, other than existential and quantified predicates, must return a scalar result;that is, not more than one column from not more than one matching row or aggregation.If the query returns more columns or rows, a run-time error will occur (“Multiple rows in a singleton select…​”).

Note

Although it is reporting a genuine error, the message can be slightly misleading.A “singleton SELECT” is a query that must not be capable of returning more than one row.However, “singleton” and “scalar” are not synonymous: not all singleton SELECTS are required to be scalar;and single-column selects can return multiple rows for existential and quantified predicates.
Subquery Examples

  1. A subquery as the output column in a SELECT list:

    SELECT
  e.first_name,
  e.last_name,
  (SELECT
       sh.new_salary
   FROM
       salary_history sh
   WHERE
       sh.emp_no = e.emp_no
   ORDER BY sh.change_date DESC ROWS 1) AS last_salary
FROM
  employee e

  2. A subquery in the WHERE clause for obtaining the employee’s maximum salary and filtering by it:

    SELECT
  e.first_name,
  e.last_name,
  e.salary
FROM employee e
WHERE
  e.salary = (
    SELECT MAX(ie.salary)
    FROM employee ie
  )

Predicates

A predicate is a simple expression asserting some fact, let’s call it P.If P resolves as TRUE, it succeeds.If it resolves to FALSE or NULL (UNKNOWN), it fails.A trap lies here, though: suppose the predicate, P, returns FALSE.In this case NOT(P) will return TRUE.On the other hand, if P returns NULL (unknown), then NOT(P) returns NULL as well.

In SQL, predicates can appear in CHECK constraints, WHERE and HAVING clauses, CASE expressions, the IIF() function and in the ON condition of JOIN clauses, and anywhere a normal expression can occur.

Conditions

A condition — or Boolean expression — is a statement about the data that, like a predicate, can resolve to TRUE, FALSE or NULL.Conditions consist of one or more predicates, possibly negated using NOT and connected by AND and OR operators.Parentheses may be used for grouping predicates and controlling evaluation order.

A predicate may embed other predicates.Evaluation sequence is in the outward direction, i.e. the innermost predicates are evaluated first.Each “level” is evaluated in precedence order until the truth value of the ultimate condition is resolved.

Comparison Predicates

A comparison predicate consists of two expressions connected with a comparison operator.There are six traditional comparison operators:

=, >, <, >=, <=, <>

For the complete list of comparison operators with their variant forms, see Comparison Operators.

If one of the sides (left or right) of a comparison predicate has NULL in it, the value of the predicate will be UNKNOWN.

Examples

  1. Retrieve information about computers with the CPU frequency not less than 500 MHz and the price lower than $800:

    SELECT *
FROM Pc
WHERE speed >= 500 AND price < 800;

  2. Retrieve information about all dot matrix printers that cost less than $300:

    SELECT *
FROM Printer
WHERE ptrtype = 'matrix' AND price < 300;

  3. The following query will return no data, even if there are printers with no type specified for them, because a predicate that compares NULL with NULL returns NULL:

    SELECT *
FROM Printer
WHERE ptrtype = NULL AND price < 300;

    On the other hand, ptrtype can be tested for NULL and return a result: it is just that it is not a comparison test:

    SELECT *
FROM Printer
WHERE ptrtype IS NULL AND price < 300;

     — see [fblangref50-commons-isnotnull].

Note
Note about String Comparison

When CHAR and VARCHAR fields are compared for equality, trailing spaces are ignored in all cases.

Other Comparison Predicates

Other comparison predicates are marked by keyword symbols.

BETWEEN
Syntax
<value> [NOT] BETWEEN <value_1> AND <value_2>

The BETWEEN predicate tests whether a value falls within a specified range of two values.(NOT BETWEEN tests whether the value does not fall within that range.)

The operands for BETWEEN predicate are two arguments of compatible data types.The BETWEEN predicate in Firebird is asymmetrical — if the lower bound is not the first argument, the BETWEEN predicate will return FALSE.The search is inclusive (the values represented by both arguments are included in the search).In other words, the BETWEEN predicate could be rewritten:

<value> >= <value_1> AND <value> <= <value_2>

When BETWEEN is used in the search conditions of DML queries, the Firebird optimizer can use an index on the searched column, if it is available.

Example
SELECT *
FROM EMPLOYEE
WHERE HIRE_DATE BETWEEN date '1992-01-01' AND CURRENT_DATE
LIKE
Syntax
<match_value> [NOT] LIKE <pattern>
   [ESCAPE <escape character>]

<match_value>      ::= character-type expression
<pattern>          ::= search pattern
<escape character> ::= escape character

The LIKE predicate compares the character-type expression with the pattern defined in the second expression.Case- or accent-sensitivity for the comparison is determined by the collation that is in use.A collation can be specified for either operand, if required.

Wildcards

Two wildcard symbols are available for use in the search pattern:

  • the percentage symbol (%) will match any sequence of zero or more characters in the tested value

  • the underscore character (_) will match any single character in the tested value

If the tested value matches the pattern, taking into account wildcard symbols, the predicate is TRUE.

Using the ESCAPE Character Option

If the search string contains either of the wildcard symbols, the ESCAPE clause can be used to specify an escape character.The escape character must precede the ‘%’ or ‘_’ symbol in the search string, to indicate that the symbol is to be interpreted as a literal character.

Examples using LIKE

  1. Find the numbers of departments whose names start with the word “Software”:

    SELECT DEPT_NO
FROM DEPT
WHERE DEPT_NAME LIKE 'Software%';

    It is possible to use an index on the DEPT_NAME field if it exists.

    Note
    About LIKE and the Optimizer

    The LIKE predicate itself does not use an index.However, if the predicate takes the form of LIKE 'string%', it will be converted to the STARTING WITH predicate, which will use an index.This optimization only works for literal patterns, not for parameters.

    So, if you need to search for the beginning of a string, it is recommended to use the [fblangref50-commons-predstartwith] predicate instead of the LIKE predicate.

  2. Search for employees whose names consist of 5 letters, start with the letters “Sm” and end with “th”. The predicate will be true for such names as “Smith” and “Smyth”.

    SELECT
  first_name
FROM
  employee
WHERE first_name LIKE 'Sm_th'

  3. Search for all clients whose address contains the string “Rostov”:

    SELECT *
FROM CUSTOMER
WHERE ADDRESS LIKE '%Rostov%'
    Note

    If you need to do a case-insensitive search for something enclosed inside a string (LIKE '%Abc%'), use of the [fblangref50-commons-predcontaining] predicate is recommended, in preference to the LIKE predicate.

  4. Search for tables containing the underscore character in their names.The ‘#’ character is used as the escape character:

    SELECT
  RDB$RELATION_NAME
FROM RDB$RELATIONS
WHERE RDB$RELATION_NAME LIKE '%#_%' ESCAPE '#'
See also

STARTING WITH, CONTAINING, SIMILAR TO

STARTING WITH
Syntax
<value> [NOT] STARTING WITH <value>

The STARTING WITH predicate searches for a string or a string-like type that starts with the characters in its value argument.The case- and accent-sensitivity of STARTING WITH depends on the collation of the first value.

When STARTING WITH is used in the search conditions of DML queries, the Firebird optimizer can use an index on the searched column, if it exists.

Example

Search for employees whose last names start with “Jo”:

SELECT LAST_NAME, FIRST_NAME
FROM EMPLOYEE
WHERE LAST_NAME STARTING WITH 'Jo'
See also

LIKE

CONTAINING
Syntax
<value> [NOT] CONTAINING <value>

The CONTAINING predicate searches for a string or a string-like type looking for the sequence of characters that matches its argument.It can be used for an alphanumeric (string-like) search on numbers and dates.A CONTAINING search is not case-sensitive.However, if an accent-sensitive collation is in use then the search will be accent-sensitive.

Examples

  1. Search for projects whose names contain the substring “Map”:

    SELECT *
FROM PROJECT
WHERE PROJ_NAME CONTAINING 'Map';

    Two rows with the names “AutoMap” and “MapBrowser port” are returned.

  2. Search for changes in salaries with the date containing number 84 (in this case, it means changes that took place in 1984):

    SELECT *
FROM SALARY_HISTORY
WHERE CHANGE_DATE CONTAINING 84;
See also

LIKE

SIMILAR TO
Syntax
string-expression [NOT] SIMILAR TO <pattern> [ESCAPE <escape-char>]

<pattern>     ::= an SQL regular expression
<escape-char> ::= a single character

SIMILAR TO matches a string against an SQL regular expression pattern.Unlike in some other languages, the pattern must match the entire string to succeed — matching a substring is not enough.If any operand is NULL, the result is NULL.Otherwise, the result is TRUE or FALSE.

If a literal pattern is used, and it doesn’t start with a wildcard or other special regex character, SIMILAR TO can use an index.

Escaping Special Characters

To match against a character that is special in regular expressions, that character has to be escaped.There is no default escape character;the user specifies one when needed:

'Peer (Poire)' similar to 'P[^ ]+ \(P[^ ]+\)' escape '\'    -- true
'Pera [Pear]'  similar to 'P[^ ]+ #[P[^ ]+#]' escape '#'    -- true
'Päron-äppledryck' similar to 'P%$-ä%' escape '$'           -- true
'Pärondryck' similar to 'P%--ä%' escape '-'                 -- false

The last line demonstrates that the escape character can also escape itself, if needed.

Syntax: SQL Regular Expressions

The following syntax defines the SQL regular expression format.It is a complete and correct top-down definition.It is also highly formal and long, and may be daunting to anyone who hasn’t already some experience with regular expressions (or with highly formal, rather long top-down definitions).Feel free to skip it and read the next section, Building Regular Expressions, which uses a bottom-up approach, aimed at the rest of us.

<regular expression> ::= <regular term> ['|' <regular term> ...]

<regular term> ::= <regular factor> ...

<regular factor> ::= <regular primary> [<quantifier>]

<quantifier> ::= ? | * | + | '{' <m> [,[<n>]] '}'

<m>, <n> ::= unsigned int, with <m> <= <n> if both present

<regular primary> ::=
    <character> | <character class> | %
  | (<regular expression>)

<character> ::= <escaped character> | <non-escaped character>

<escaped character> ::=
  <escape-char> <special character> | <escape-char> <escape-char>

<special character> ::= any of the characters []()|^-+*%_?{}

<non-escaped character> ::=
  any character that is not a <special character>
  and not equal to <escape-char> (if defined)

<character class> ::=
    '_' | '[' <member> ... ']' | '[^' <non-member> ... ']'
  | '[' <member> ... '^' <non-member> ... ']'

<member>, <non-member> ::= <character> | <range> | <predefined class>

<range> ::= <character>-<character>

<predefined class> ::= '[:' <predefined class name> ':]'

<predefined class name> ::=
  ALPHA | UPPER | LOWER | DIGIT | ALNUM | SPACE | WHITESPACE
Building Regular Expressions

In this section are the elements and rules for building SQL regular expressions.

Characters

Within regular expressions, most characters represent themselves.The only exceptions are the special characters below:

[ ] ( ) | ^ - + * % _ ? { }

... and the escape character, if it is defined.

A regular expression that contains no special characters or escape characters matches only strings that are identical to itself (subject to the collation in use).That is, it functions just like the ‘=’ operator:

'Apple' similar to 'Apple'  -- true
'Apples' similar to 'Apple' -- false
'Apple' similar to 'Apples' -- false
'APPLE' similar to 'Apple'  -- depends on collation
Wildcards

The known SQL wildcards ‘_’ and ‘%’ match any single character and a string of any length, respectively:

'Birne' similar to 'B_rne'   -- true
'Birne' similar to 'B_ne'    -- false
'Birne' similar to 'B%ne'    -- true
'Birne' similar to 'Bir%ne%' -- true
'Birne' similar to 'Birr%ne' -- false

Notice how ‘%’ also matches the empty string.

Character Classes

A bunch of characters enclosed in brackets define a character class.A character in the string matches a class in the pattern if the character is a member of the class:

'Citroen' similar to 'Cit[arju]oen'     -- true
'Citroen' similar to 'Ci[tr]oen'        -- false
'Citroen' similar to 'Ci[tr][tr]oen'    -- true

As can be seen from the second line, the class only matches a single character, not a sequence.

Within a class definition, two characters connected by a hyphen define a range.A range comprises the two endpoints and all the characters that lie between them in the active collation.Ranges can be placed anywhere in the class definition without special delimiters to keep them apart from the other elements.

'Datte' similar to 'Dat[q-u]e'          -- true
'Datte' similar to 'Dat[abq-uy]e'       -- true
'Datte' similar to 'Dat[bcg-km-pwz]e'   -- false
Predefined Character Classes

The following predefined character classes can also be used in a class definition:

[:ALPHA:]

Latin letters a..z and A..Z.With an accent-insensitive collation, this class also matches accented forms of these characters.

[:DIGIT:]

Decimal digits 0..9.

[:ALNUM:]

Union of [:ALPHA:] and [:DIGIT:].

[:UPPER:]

Uppercase Latin letters A..Z.Also matches lowercase with case-insensitive collation and accented forms with accent-insensitive collation.

[:LOWER:]

Lowercase Latin letters a..z.Also matches uppercase with case-insensitive collation and accented forms with accent-insensitive collation.

[:SPACE:]

Matches the space character (ASCII 32).

[:WHITESPACE:]

Matches horizontal tab (ASCII 9), linefeed (ASCII 10), vertical tab (ASCII 11), formfeed (ASCII 12), carriage return (ASCII 13) and space (ASCII 32).

Including a predefined class has the same effect as including all its members.Predefined classes are only allowed within class definitions.If you need to match against a predefined class and nothing more, place an extra pair of brackets around it.

'Erdbeere' similar to 'Erd[[:ALNUM:]]eere'     -- true
'Erdbeere' similar to 'Erd[[:DIGIT:]]eere'     -- false
'Erdbeere' similar to 'Erd[a[:SPACE:]b]eere'   -- true
'Erdbeere' similar to [[:ALPHA:]]              -- false
'E'        similar to [[:ALPHA:]]              -- true

If a class definition starts with a caret, everything that follows is excluded from the class.All other characters match:

'Framboise' similar to 'Fra[^ck-p]boise'       -- false
'Framboise' similar to 'Fr[^a][^a]boise'       -- false
'Framboise' similar to 'Fra[^[:DIGIT:]]boise'  -- true

If the caret is not placed at the start of the sequence, the class contains everything before the caret, except for the elements that also occur after the caret:

'Grapefruit' similar to 'Grap[a-m^f-i]fruit'   -- true
'Grapefruit' similar to 'Grap[abc^xyz]fruit'   -- false
'Grapefruit' similar to 'Grap[abc^de]fruit'    -- false
'Grapefruit' similar to 'Grap[abe^de]fruit'    -- false

'3' similar to '[[:DIGIT:]^4-8]'               -- true
'6' similar to '[[:DIGIT:]^4-8]'               -- false

Lastly, the already mentioned wildcard ‘_’ is a character class of its own, matching any single character.

Quantifiers

A question mark (‘?’) immediately following a character or class indicates that the preceding item may occur 0 or 1 times to match:

'Hallon' similar to 'Hal?on'                   -- false
'Hallon' similar to 'Hal?lon'                  -- true
'Hallon' similar to 'Halll?on'                 -- true
'Hallon' similar to 'Hallll?on'                -- false
'Hallon' similar to 'Halx?lon'                 -- true
'Hallon' similar to 'H[a-c]?llon[x-z]?'        -- true

An asterisk (‘*’) immediately following a character or class indicates that the preceding item may occur 0 or more times to match:

'Icaque' similar to 'Ica*que'                  -- true
'Icaque' similar to 'Icar*que'                 -- true
'Icaque' similar to 'I[a-c]*que'               -- true
'Icaque' similar to '_*'                       -- true
'Icaque' similar to '[[:ALPHA:]]*'             -- true
'Icaque' similar to 'Ica[xyz]*e'               -- false

A plus sign (‘+’) immediately following a character or class indicates that the preceding item must occur 1 or more times to match:

'Jujube' similar to 'Ju_+'                     -- true
'Jujube' similar to 'Ju+jube'                  -- true
'Jujube' similar to 'Jujuber+'                 -- false
'Jujube' similar to 'J[jux]+be'                -- true
'Jujube' sililar to 'J[[:DIGIT:]]+ujube'       -- false

If a character or class is followed by a number enclosed in braces (‘{’ and ‘}’), it must be repeated exactly that number of times to match:

'Kiwi' similar to 'Ki{2}wi'                    -- false
'Kiwi' similar to 'K[ipw]{2}i'                 -- true
'Kiwi' similar to 'K[ipw]{2}'                  -- false
'Kiwi' similar to 'K[ipw]{3}'                  -- true

If the number is followed by a comma (‘,’), the item must be repeated at least that number of times to match:

'Limone' similar to 'Li{2,}mone'               -- false
'Limone' similar to 'Li{1,}mone'               -- true
'Limone' similar to 'Li[nezom]{2,}'            -- true

If the braces contain two numbers separated by a comma, the second number not smaller than the first, then the item must be repeated at least the first number and at most the second number of times to match:

'Mandarijn' similar to 'M[a-p]{2,5}rijn'       -- true
'Mandarijn' similar to 'M[a-p]{2,3}rijn'       -- false
'Mandarijn' similar to 'M[a-p]{2,3}arijn'      -- true

The quantifiers ‘?’, ‘*’ and ‘+’ are shorthand for {0,1}, {0,} and {1,}, respectively.

OR-ing Terms

Regular expression terms can be OR’ed with the ‘|’ operator.A match is made when the argument string matches at least one of the terms:

'Nektarin' similar to 'Nek|tarin'              -- false
'Nektarin' similar to 'Nektarin|Persika'       -- true
'Nektarin' similar to 'M_+|N_+|P_+'            -- true
Subexpressions

One or more parts of the regular expression can be grouped into subexpressions (also called subpatterns) by placing them between parentheses (‘(’ and ‘)’).A subexpression is a regular expression in its own right.It can contain all the elements allowed in a regular expression, and can also have quantifiers added to it.

'Orange' similar to 'O(ra|ri|ro)nge'           -- true
'Orange' similar to 'O(r[a-e])+nge'            -- true
'Orange' similar to 'O(ra){2,4}nge'            -- false
'Orange' similar to 'O(r(an|in)g|rong)?e'      -- true
IS [NOT] DISTINCT FROM
Syntax
<operand1> IS [NOT] DISTINCT FROM <operand2>

Two operands are considered DISTINCT (different) if they have a different value or if one of them is NULL and the other non-null.They are considered NOT DISTINCT (equal) if they have the same value or if both of them are NULL.

IS [NOT] DISTINCT FROM always returns TRUE or FALSE and never UNKNOWN (NULL) (unknown value).Operators ‘=’ and ‘<>’, conversely, will return UNKNOWN (NULL) if one or both operands are NULL.

Table 1. Results of Various Comparison Predicates

Operand values

Result of various predicates

=

IS NOT DISTINCT FROM

<>

IS DISTINCT FROM

Same value

TRUE

TRUE

FALSE

FALSE

Different values

FALSE

FALSE

TRUE

TRUE

Both NULL

UNKNOWN

TRUE

UNKNOWN

FALSE

One NULL, one non-NULL

UNKNOWN

FALSE

UNKNOWN

TRUE
Examples
SELECT ID, NAME, TEACHER
FROM COURSES
WHERE START_DAY IS NOT DISTINCT FROM END_DAY;

-- PSQL fragment
IF (NEW.JOB IS DISTINCT FROM OLD.JOB)
THEN POST_EVENT 'JOB_CHANGED';
See also

[fblangref50-commons-isnotnull], [fblangref50-commons-isnotboolean]

Boolean IS [NOT]
Syntax
<value> IS [NOT] { TRUE | FALSE | UNKNOWN }

The IS predicate with Boolean literal values checks if the expression on the left side matches the Boolean value on the right side.The expression on the left side must be of type BOOLEAN, otherwise an exception is raised.

The IS [NOT] UNKNOWN is equivalent to IS [NOT] NULL.

Note

The right side of the predicate only accepts the literals TRUE, FALSE, UNKNOWN, and NULL.It does not accept expressions.
Using the IS predicate with a Boolean data type
-- Checking FALSE value
SELECT * FROM TBOOL WHERE BVAL IS FALSE;

ID            BVAL
============= =======
2             <false>

-- Checking UNKNOWN value
SELECT * FROM TBOOL WHERE BVAL IS UNKNOWN;

ID            BVAL
============= =======
3             <null>
See also

[fblangref50-commons-isnotnull]

IS [NOT] NULL
Syntax
<value> IS [NOT] NULL

Since NULL is not a value, these operators are not comparison operators.The IS [NOT] NULL predicate tests that the expression on the left side has a value (IS NOT NULL) or has no value (IS NULL).

Example

Search for sales entries that have no shipment date set for them:

SELECT * FROM SALES
WHERE SHIP_DATE IS NULL;
Note
Note regarding the IS predicates

The IS predicates take precedence above the others.

Existential Predicates

This group of predicates includes those that use subqueries to submit values for all kinds of assertions in search conditions.Existential predicates are so called because they use various methods to test for the existence or non-existence of some condition, returning TRUE if the existence or non-existence is confirmed or FALSE otherwise.

EXISTS

Syntax
[NOT] EXISTS (<select_stmt>)

The EXISTS predicate uses a subquery expression as its argument.It returns TRUE if the subquery result contains at least one row, otherwise it returns FALSE.

NOT EXISTS returns FALSE if the subquery result contains at least one row, otherwise it returns TRUE.

Note

The subquery can specify multiple columns, or SELECT *, because the evaluation is made on the number of rows that match its criteria, not on the data.
Examples

  1. Find those employees who have projects.

    SELECT *
FROM employee
WHERE EXISTS(SELECT *
             FROM  employee_project ep
             WHERE ep.emp_no = employee.emp_no)

  2. Find those employees who have no projects.

    SELECT *
FROM employee
WHERE NOT EXISTS(SELECT *
                 FROM employee_project ep
                 WHERE ep.emp_no = employee.emp_no)

IN

Syntax
<value> [NOT] IN (<select_stmt> | <value_list>)

<value_list> ::= <value_1> [, <value_2> ...]

The IN predicate tests whether the value of the expression on the left side is present in the set of values specified on the right side.The set of values cannot have more than 65535 items.The IN predicate can be replaced with the following equivalent forms:

(<value> = <value_1> [OR <value> = <value_2> ...])

<value> = { ANY | SOME } (<select_stmt>)

When the IN predicate is used in the search conditions of DML queries, the Firebird optimizer can use an index on the searched column, if a suitable one exists.Lists that are known to be constant are pre-evaluated as invariants and cached as a binary search tree, making comparisons faster if the condition needs to be tested for many rows or if the value list is long.

In its second form, the IN predicate tests whether the value of the expression on the left side is present — or not present, if NOT IN is used — in the result of the subquery on the right side.

The subquery must specify only one column, otherwise the error “count of column list and variable list do not match” will occur.

Queries using an IN predicate with a subquery can be replaced with a similar query using the EXISTS predicate.For example, the following query:

SELECT
  model, speed, hd
FROM PC
WHERE
model IN (SELECT model
          FROM product
          WHERE maker = 'A');

can be replaced with a similar one using the EXISTS predicate:

SELECT
  model, speed, hd
FROM PC
WHERE
 EXISTS (SELECT *
         FROM product
         WHERE maker = 'A'
           AND product.model = PC.model);

However, a query using NOT IN with a subquery does not always give the same result as its NOT EXISTS counterpart.The reason is that EXISTS always returns TRUE or FALSE, whereas IN returns NULL in one of these two cases:

  1. when the test value is NULL and the IN () list is not empty

  2. when the test value has no match in the IN () list and at least one list element is NULL

It is in only these two cases that IN () will return NULL while the EXISTS predicate will return FALSE (“no matching row found”).In a search or, for example, an IF (…​) statement, both results mean “failure”, and it makes no difference to the outcome.

For the same data, NOT IN () will return NULL, while NOT EXISTS will return TRUE, leading to opposite results.

As an example, suppose you have the following query:

-- Looking for people who were not born
-- on the same day as any famous New York citizen
SELECT P1.name AS NAME
FROM Personnel P1
WHERE P1.birthday NOT IN (SELECT C1.birthday
                          FROM Celebrities C1
                          WHERE C1.birthcity = 'New York');

Now, assume that the NY celebrities list is not empty and contains at least one NULL birthday.Then for every citizen who does not share his birthday with a NY celebrity, NOT IN will return NULL, because that is what IN does.The search condition is thereby not satisfied and the citizen will be left out of the SELECT result, which is wrong.

For citizens whose birthday does match with a celebrity’s birthday, NOT IN will correctly return FALSE, so they will be left out too, and no rows will be returned.

If the NOT EXISTS form is used:

-- Looking for people who were not born
-- on the same day as any famous New York citizen
SELECT P1.name AS NAME
FROM Personnel P1
WHERE NOT EXISTS (SELECT *
                  FROM Celebrities C1
                  WHERE C1.birthcity = 'New York'
                    AND C1.birthday = P1.birthday);

non-matches will have a NOT EXISTS result of TRUE and their records will be in the result set.

Tip

If there is any chance of NULLs being encountered when searching for a non-match, you will want to use NOT EXISTS.
Examples of use

  1. Find employees with the names “Pete”, “Ann” and “Roger”:

    SELECT *
FROM EMPLOYEE
WHERE FIRST_NAME IN ('Pete', 'Ann', 'Roger');

  2. Find all computers that have models whose manufacturer starts with the letter “A”:

    SELECT
  model, speed, hd
FROM PC
WHERE
  model IN (SELECT model
            FROM product
            WHERE maker STARTING WITH 'A');
See also

EXISTS

SINGULAR

Syntax
[NOT] SINGULAR (<select_stmt>)

The SINGULAR predicate takes a subquery as its argument and evaluates it as TRUE if the subquery returns exactly one row, otherwise the predicate is evaluated as FALSE.The subquery may list several output columns since the rows are not returned anyway, they are only tested for (singular) existence.For brevity, people usually specify ‘SELECT *’.The SINGULAR predicate can return only two values: TRUE or FALSE.

Example

Find those employees who have only one project.

SELECT *
FROM employee
WHERE SINGULAR(SELECT *
               FROM employee_project ep
               WHERE ep.emp_no = employee.emp_no)

Quantified Subquery Predicates

A quantifier is a logical operator that sets the number of objects for which this condition is true.It is not a numeric quantity, but a logical one that connects the condition with the full set of possible objects.Such predicates are based on logical universal and existential quantifiers that are recognised in formal logic.

In subquery expressions, quantified predicates make it possible to compare separate values with the results of subqueries;they have the following common form:

<value expression> <comparison operator> <quantifier> <subquery>

ALL

Syntax
<value> <op> ALL (<select_stmt>)

When the ALL quantifier is used, the predicate is TRUE if every value returned by the subquery satisfies the condition in the predicate of the main query.

Example

Show only those clients whose ratings are higher than the rating of every client in Paris.

SELECT c1.*
FROM Customers c1
WHERE c1.rating > ALL
      (SELECT c2.rating
       FROM Customers c2
       WHERE c2.city = 'Paris')
Important

If the subquery returns an empty set, the predicate is TRUE for every left-side value, regardless of the operator.This may appear to be contradictory, because every left-side value will thus be considered both smaller and greater than, both equal to and unequal to, every element of the right-side stream.

Nevertheless, it aligns perfectly with formal logic: if the set is empty, the predicate is true for every row in the set.

ANY and SOME

Syntax
<value> <op> {ANY | SOME} (<select_stmt>)

The quantifiers ANY and SOME are identical in their behaviour.Both are specified in the SQL standard, and they be used interchangeably to improve the readability of operators.When the ANY or the SOME quantifier is used, the predicate is TRUE if any of the values returned by the subquery satisfies the condition in the predicate of the main query.If the subquery returns no rows at all, the predicate is automatically considered as FALSE.

Example

Show only those clients whose ratings are higher than those of one or more clients in Rome.

SELECT *
FROM Customers
WHERE rating > ANY
      (SELECT rating
       FROM Customers
       WHERE city = 'Rome')