The Firebird 5.0 Language Reference | RDB$BLOB_UTIL

Window (Analytical) FunctionsContext Variables

Examples

Create a BLOB in temporary space and return it in EXECUTE BLOCK

execute block returns (b blob)
as
begin
    -- Create a BLOB handle in the temporary space.
    b = rdb$blob_util.new_blob(false, true);

    -- Add chunks of data.
    b = blob_append(b, '12345');
    b = blob_append(b, '67');

    suspend;
end

Open a BLOB and return chunks of it with EXECUTE BLOCK

execute block returns (s varchar(10))
as
    declare b blob = '1234567';
    declare bhandle integer;
begin
    -- Open the BLOB and get a BLOB handle.
    bhandle = rdb$blob_util.open_blob(b);

    -- Get chunks of data as string and return.

    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;

    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;

    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;

    -- Here EOF is found, so it returns NULL.
    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;

    -- Close the BLOB handle.
    execute procedure rdb$blob_util.close_handle(bhandle);
end

Seek in a blob

set term !;

execute block returns (s varchar(10))
as
    declare b blob;
    declare bhandle integer;
begin
    -- Create a stream BLOB handle.
    b = rdb$blob_util.new_blob(false, true);

    -- Add data.
    b = blob_append(b, '0123456789');

    -- Open the BLOB.
    bhandle = rdb$blob_util.open_blob(b);

    -- Seek to 5 since the start.
    rdb$blob_util.seek(bhandle, 0, 5);
    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;

    -- Seek to 2 since the start.
    rdb$blob_util.seek(bhandle, 0, 2);
    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;

    -- Advance 2.
    rdb$blob_util.seek(bhandle, 1, 2);
    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;

    -- Seek to -1 since the end.
    rdb$blob_util.seek(bhandle, 2, -1);
    s = rdb$blob_util.read_data(bhandle, 3);
    suspend;
end!

set term ;!

Check if blobs are writable

create table t(b blob);

set term !;

execute block returns (bool boolean)
as
    declare b blob;
begin
    b = blob_append(null, 'writable');
    bool = rdb$blob_util.is_writable(b);
    suspend;

    insert into t (b) values ('not writable') returning b into b;
    bool = rdb$blob_util.is_writable(b);
    suspend;
end!

set term ;!

`RDB$PROFILER`

A package with functions and procedures to run and control the profiler.

Note

These profiler controls are standard, but the actual profiler is a plugin.The profiler used depends on the setting of DefaultProfilerPlugin in firebird.conf or databases.conf, or the PLUGIN_NAME parameter of START_SESSION.

Firebird 5.0 comes with a profiler plugin called Default_Profiler.
Users are allowed to profile their own connections.Profiling connections from other users requires the PROFILE_ANY_ATTACHMENT system privilege.

Function `START_SESSION`

RDB$PROFILER.START_SESSION starts a new profiler session, makes it the current session (of the given ATTACHMENT_ID) and returns its identifier.

If FLUSH_INTERVAL is different from NULL, auto-flush is set up in the same way as manually calling RDB$PROFILER.SET_FLUSH_INTERVAL.

If PLUGIN_NAME is NULL (the default), it uses the database configuration DefaultProfilerPlugin.

PLUGIN_OPTIONS are plugin specific options and currently should be NULL for the Default_Profiler plugin.

Input parameters

DESCRIPTION type VARCHAR(255) CHARACTER SET UTF8 default NULL
FLUSH_INTERVAL type INTEGER default NULL
ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION
PLUGIN_NAME type VARCHAR(255) CHARACTER SET UTF8 default NULL
PLUGIN_OPTIONS type VARCHAR(255) CHARACTER SET UTF8 default NULL

Return type: BIGINT NOT NULL.

Procedure `CANCEL_SESSION`

RDB$PROFILER.CANCEL_SESSION cancels the current profiler session (of the given ATTACHMENT_ID).

All session data present in the profiler plugin is discarded and will not be flushed.

Data already flushed is not deleted automatically.

Input parameter

ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION

Procedure `DISCARD`

RDB$PROFILER.DISCARD removes all sessions (of the given ATTACHMENT_ID) from memory, without flushing them.

If there is an active session, it is cancelled.

Input parameter

ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION

Procedure `FINISH_SESSION`

RDB$PROFILER.FINISH_SESSION finishes the current profiler session (of the given ATTACHMENT_ID).

If FLUSH is TRUE, the snapshot tables are updated with data of the finished session (and old finished sessions not yet present in the snapshot), otherwise data remains only in memory for later update.

Calling RDB$PROFILER.FINISH_SESSION(TRUE) has the same semantics of calling RDB$PROFILER.FINISH_SESSION(FALSE) followed by RDB$PROFILER.FLUSH (using the same ATTACHMENT_ID).

Input parameters

FLUSH type BOOLEAN NOT NULL default TRUE
ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION

Procedure `FLUSH`

RDB$PROFILER.FLUSH updates the snapshot tables with data from the profile sessions (of the given ATTACHMENT_ID) in memory.

After flushing, the data is stored in tables PLG$PROF_SESSIONS, PLG$PROF_STATEMENTS, PLG$PROF_RECORD_SOURCES, PLG$PROF_REQUESTS, PLG$PROF_PSQL_STATS and PLG$PROF_RECORD_SOURCE_STATS and may be read and analyzed by the user.

Data is updated using an autonomous transaction, so if the procedure is called in a snapshot transaction, data will not be directly readable in the same transaction.

Once flush happens, finished sessions are removed from memory.

Input parameter

ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION

Procedure `PAUSE_SESSION`

RDB$PROFILER.PAUSE_SESSION pauses the current profiler session (of the given ATTACHMENT_ID), so the next executed statements statistics are not collected.

If FLUSH is TRUE, the snapshot tables are updated with data up to the current moment, otherwise data remains only in memory for later update.

Calling RDB$PROFILER.PAUSE_SESSION(TRUE) has the same semantics as calling RDB$PROFILER.PAUSE_SESSION(FALSE) followed by RDB$PROFILER.FLUSH (using the same ATTACHMENT_ID).

Input parameters

FLUSH type BOOLEAN NOT NULL default FALSE
ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION

Procedure `RESUME_SESSION`

RDB$PROFILER.RESUME_SESSION resumes the current profiler session (of the given ATTACHMENT_ID), if it was paused, so the next executed statements statistics are collected again.

Input parameter

ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION

Procedure `SET_FLUSH_INTERVAL`

RDB$PROFILER.SET_FLUSH_INTERVAL turns periodic auto-flush on (when FLUSH_INTERVAL is greater than 0) or off (when FLUSH_INTERVAL is equal to 0).

FLUSH_INTERVAL is interpreted as number of seconds.

Input parameters

FLUSH_INTERVAL type INTEGER NOT NULL
ATTACHMENT_ID type BIGINT NOT NULL default CURRENT_CONNECTION

Example

Below is a sample profile session and queries for data analysis.

Preparation — create table and routines that will be analyzed

create table tab (
    id integer not null,
    val integer not null
);

set term !;

create or alter function mult(p1 integer, p2 integer) returns integer
as
begin
    return p1 * p2;
end!

create or alter procedure ins
as
    declare n integer = 1;
begin
    while (n <= 1000)
    do
    begin
        if (mod(n, 2) = 1) then
            insert into tab values (:n, mult(:n, 2));
        n = n + 1;
    end
end!

set term ;!

Start profiling

select rdb$profiler.start_session('Profile Session 1') from rdb$database;

set term !;

execute block
as
begin
    execute procedure ins;
    delete from tab;
end!

set term ;!

execute procedure rdb$profiler.finish_session(true);

execute procedure ins;

select rdb$profiler.start_session('Profile Session 2') from rdb$database;

select mod(id, 5),
       sum(val)
  from tab
  where id <= 50
  group by mod(id, 5)
  order by sum(val);

execute procedure rdb$profiler.finish_session(true);

Data analysis

set transaction read committed;

select * from plg$prof_sessions;

select * from plg$prof_psql_stats_view;

select * from plg$prof_record_source_stats_view;

select preq.*
  from plg$prof_requests preq
  join plg$prof_sessions pses
    on pses.profile_id = preq.profile_id and
       pses.description = 'Profile Session 1';

select pstat.*
  from plg$prof_psql_stats pstat
  join plg$prof_sessions pses
    on pses.profile_id = pstat.profile_id and
       pses.description = 'Profile Session 1'
  order by pstat.profile_id,
           pstat.request_id,
           pstat.line_num,
           pstat.column_num;

select pstat.*
  from plg$prof_record_source_stats pstat
  join plg$prof_sessions pses
    on pses.profile_id = pstat.profile_id and
       pses.description = 'Profile Session 2'
  order by pstat.profile_id,
           pstat.request_id,
           pstat.cursor_id,
           pstat.record_source_id;

`RDB$TIME_ZONE_UTIL`

A package of time zone utility functions and procedures.

Function `DATABASE_VERSION`

RDB$TIME_ZONE_UTIL.DATABASE_VERSION returns the version of the time zone database.

Return type: VARCHAR(10) CHARACTER SET ASCII.

Example

select rdb$time_zone_util.database_version()
from rdb$database;

Returns:

DATABASE_VERSION
================
2023c

Procedure `TRANSITIONS`

RDB$TIME_ZONE_UTIL.TRANSITIONS returns the set of rules between the start and end timestamps for a named time zone.

Input parameters

RDB$TIME_ZONE_NAME type CHAR(63)
RDB$FROM_TIMESTAMP type TIMESTAMP WITH TIME ZONE
RDB$TO_TIMESTAMP type TIMESTAMP WITH TIME ZONE

Output parameters:

RDB$START_TIMESTAMP: type TIMESTAMP WITH TIME ZONE — The start timestamp of the transition
RDB$END_TIMESTAMP: type TIMESTAMP WITH TIME ZONE — The end timestamp of the transition
RDB$ZONE_OFFSET: type SMALLINT — The zone’s offset, in minutes
RDB$DST_OFFSET: type SMALLINT — The zone’s DST offset, in minutes
RDB$EFFECTIVE_OFFSET: type SMALLINT — Effective offset (ZONE_OFFSET + DST_OFFSET)

Example

select *
  from rdb$time_zone_util.transitions(
    'America/Sao_Paulo',
    timestamp '2017-01-01',
    timestamp '2019-01-01');

Returns (RDB$ prefix left off for brevity):

             START_TIMESTAMP                END_TIMESTAMP ZONE_OFFSET DST_OFFSET EFFECTIVE_OFFSET
============================ ============================ =========== ========== ================
2016-10-16 03:00:00.0000 GMT 2017-02-19 01:59:59.9999 GMT       -180        60             -120
2017-02-19 02:00:00.0000 GMT 2017-10-15 02:59:59.9999 GMT       -180         0             -180
2017-10-15 03:00:00.0000 GMT 2018-02-18 01:59:59.9999 GMT       -180        60             -120
2018-02-18 02:00:00.0000 GMT 2018-10-21 02:59:59.9999 GMT       -180         0             -180
2018-10-21 03:00:00.0000 GMT 2019-02-17 01:59:59.9999 GMT       -180        60             -120

Examples

Examples

RDB$PROFILER

Function START_SESSION

Procedure CANCEL_SESSION

Procedure DISCARD

Procedure FINISH_SESSION

Procedure FLUSH

Procedure PAUSE_SESSION

Procedure RESUME_SESSION

Procedure SET_FLUSH_INTERVAL

Example

RDB$TIME_ZONE_UTIL

Function DATABASE_VERSION

Procedure TRANSITIONS

`RDB$PROFILER`

Function `START_SESSION`

Procedure `CANCEL_SESSION`

Procedure `DISCARD`

Procedure `FINISH_SESSION`

Procedure `FLUSH`

Procedure `PAUSE_SESSION`

Procedure `RESUME_SESSION`

Procedure `SET_FLUSH_INTERVAL`

`RDB$TIME_ZONE_UTIL`

Function `DATABASE_VERSION`

Procedure `TRANSITIONS`