501 |
335544802 |
dialect_reset_warning |
Le dialecte de la base de données passe de 3 à 1 |
304 |
335545266 |
truncate_warn |
Avertissement de chaîne tronquée pour la raison suivante |
304 |
335545267 |
truncate_monitor |
Les données de surveillance ne s’intègrent pas dans le champ |
304 |
335545268 |
truncate_context |
Les données du moteur ne correspondent pas à la valeur de retour de la fonction du système |
301 |
335544808 |
dtype_renamed |
Le type de données DATE s’appelle désormais TIMESTAMP |
301 |
336003076 |
dsql_dialect_warning_expr |
Utilisation de l’expression @1 qui renvoie des résultats différents dans le dialecte 1 et le dialecte 3 |
301 |
336003080 |
dsql_warning_number_ambiguous |
ATTENTION : Le littéral numérique @1 est interprété comme une virgule flottante |
301 |
336003081 |
dsql_warning_number_ambiguous1 |
valeur dans le dialecte SQL 1, mais comme une valeur numérique exacte dans le dialecte SQL 3. |
301 |
336003082 |
dsql_warn_precision_ambiguous |
AVERTISSEMENT : les champs NUMERIC et DECIMAL dont la précision est égale ou supérieure à 10 sont stockés |
301 |
336003083 |
dsql_warn_precision_ambiguous1 |
comme des valeurs approximatives à virgule flottante dans le dialecte SQL 1, mais comme des valeurs à 64 bits |
301 |
336003084 |
dsql_warn_precision_ambiguous2 |
entiers dans le dialecte SQL 3".300,335544807,sqlwarn, "Code d’avertissement SQL = @1 |
106 |
336068855 |
dyn_miss_priv_warning |
Warning: @1 sur @2 n’est pas accordé à @3. |
101 |
335544366 |
segment |
Longueur du tampon du segment plus courte que prévu |
100 |
335544338 |
from_no_match |
Pas de correspondance pour la première expression de valeur |
100 |
335544354 |
no_record |
Clé de base de données non valide |
100 |
335544367 |
segstr_eof |
Tentative d’extraction de plus de segments qu’il n’en existe |
0 |
335544875 |
bad_debug_format |
Mauvais format d’informations de débogage |
0 |
335544931 |
montabexh |
Espace de table de surveillance épuisé |
0 |
336068743 |
dyn_dup_procedure |
La procédure @1 existe déjà |
0 |
336068819 |
dyn_virmemexh |
Impossible d’allouer de la mémoire à partir du système d’exploitation |
0 |
336068821 |
del_gen_fail |
ERASE RDB$GENERATORS a échoué |
0 |
336068842 |
del_coll_fail |
ERASE RDB$COLLATIONS a échoué |
0 |
336068860 |
dyn_locksmith_use_granted |
Seul @1 ou un utilisateur disposant du privilège USE_GRANTED_BY_CLAUSE peut utiliser la clause GRANTED BY |
0 |
336068861 |
dyn_dup_exception |
L’exception @1 existe déjà |
0 |
336068862 |
dyn_dup_generator |
La séquence @1 existe déjà |
0 |
336068876 |
dyn_dup_function |
La fonction @1 existe déjà |
0 |
336068899 |
dyn_create_user_no_password |
Le mot de passe doit être spécifié lors de la création de l’utilisateur |
0 |
336068905 |
dyn_concur_alter_database |
La fonction ALTER DATABASE simultanée n’est pas prise en charge |
0 |
336068906 |
dyn_incompat_alter_database |
Clauses ALTER DATABASE incompatibles : '@1' et '@2' |
84 |
335544554 |
nonsql_security_rel |
La classe de sécurité de l’objet n’est pas SQL |
-84 |
335544555 |
nonsql_security_fld |
La colonne a une classe de sécurité non-SQL définie |
-84 |
335544668 |
dsql_procedure_use_err |
La procédure @1 ne renvoie aucune valeur |
-85 |
335544747 |
usrname_too_long |
Le nom d’utilisateur saisi est trop long. La longueur maximale est de 31 octets. |
-85 |
335544748 |
password_too_long |
Le mot de passe spécifié est trop long. La longueur maximale est de 8 octets. |
-85 |
335544749 |
usrname_required |
Un nom d’utilisateur est requis pour cette opération. |
-85 |
335544750 |
password_required |
Un mot de passe est requis pour cette opération |
-85 |
335544751 |
bad_protocol |
Le protocole réseau spécifié n’est pas valide |
-85 |
335544752 |
dup_usrname_found |
Un nom d’utilisateur en double a été trouvé dans la base de données de sécurité |
-85 |
335544753 |
usrname_not_found |
Le nom d’utilisateur spécifié n’a pas été trouvé dans la base de données de sécurité |
-85 |
335544754 |
error_adding_sec_record |
Une erreur s’est produite lors de la tentative d’ajout de l’utilisateur. |
-85 |
335544755 |
error_modifying_sec_record |
Une erreur s’est produite lors de la modification de l’enregistrement de l’utilisateur. |
-85 |
335544756 |
error_deleting_sec_record |
Une erreur s’est produite lors de la tentative de suppression de l’enregistrement de l’utilisateur. |
-85 |
335544757 |
error_updating_sec_db |
Une erreur s’est produite lors de la mise à jour de la base de données de sécurité. |
-103 |
335544571 |
dsql_constant_err |
Type de données pour la constante inconnu |
-104 |
335544343 |
invalid_blr |
Requête BLR invalide à l’offset @1 |
-104 |
335544390 |
syntaxerr |
Erreur de syntaxe BLR : attendu @1 à l’offset @2, rencontré @3 |
-104 |
335544425 |
ctxinuse |
contexte déjà utilisé (erreur de BLR) |
-104 |
335544426 |
ctxnotdef |
contexte non défini (erreur BLR) |
-104 |
335544429 |
badparnum |
Numéro de paramètre non défini |
-104 |
335544440 |
bad_msg_vec |
|
-104 |
335544456 |
invalid_sdl |
invalid slice description language at offset @1 |
-104 |
335544570 |
dsql_command_err |
Invalid command |
-104 |
335544579 |
dsql_internal_err |
Internal error |
-104 |
335544590 |
dsql_dup_option |
Option spécifiée plus d’une fois |
-104 |
335544591 |
dsql_tran_err |
Option de transaction inconnue |
-104 |
335544592 |
dsql_invalid_array |
Référence de tableau non valide |
-104 |
335544608 |
command_end_err |
Fin inattendue de la commande |
-104 |
335544612 |
token_err |
Token unknown |
-104 |
335544634 |
dsql_token_unk_err |
Token inconnu - ligne @1, colonne @2 |
-104 |
335544709 |
dsql_agg_ref_err |
Invalid aggregate reference |
-104 |
335544714 |
invalid_array_id |
id de blob invalide |
-104 |
335544730 |
cse_not_supported |
Client/Server Express non pris en charge dans cette version |
-104 |
335544743 |
token_too_long |
La taille du jeton dépasse la limite |
-104 |
335544763 |
invalid_string_constant |
Une constante de chaîne est délimitée par des guillemets doubles |
-104 |
335544764 |
transitional_date |
La date doit être changée en TIMESTAMP |
-104 |
335544796 |
sql_dialect_datatype_unsupport |
Le dialecte SQL du client @1 ne prend pas en charge la référence au type de données @2 |
-104 |
335544798 |
depend_on_uncommitted_rel |
Vous avez créé une dépendance indirecte sur des métadonnées non validées. Vous devez annuler la transaction en cours. |
-104 |
335544821 |
dsql_column_pos_err |
Position invalide de la colonne utilisée dans la clause @1 |
-104 |
335544822 |
dsql_agg_where_err |
Impossible d’utiliser un agrégat ou une fonction de fenêtre dans une clause WHERE, utilisez HAVING (pour l’agrégat uniquement) à la place |
-104 |
335544823 |
dsql_agg_group_err |
Impossible d’utiliser un agrégat ou une fonction de fenêtre dans une clause GROUP BY |
-104 |
335544824 |
dsql_agg_column_err |
Expression invalide dans @1 (non contenue dans une fonction d’agrégat ou dans la clause GROUP BY) |
-104 |
335544825 |
dsql_agg_having_err |
Expression invalide dans @1 (ni une fonction d’agrégat, ni une partie de la clause GROUP BY) |
-104 |
335544826 |
dsql_agg_nested_err |
Les fonctions d’agrégat et de fenêtre imbriquées ne sont pas autorisées |
-104 |
335544849 |
malformed_string |
Chaîne de caractère mal formé |
-104 |
335544851 |
command_end_err2 |
Fin inattendue de la commande - ligne @1, colonne @2 |
-104 |
335544930 |
too_big_blr |
La longueur du flux BLR @1 dépasse la limite d’implémentation @2 |
-104 |
335544980 |
internal_rejected_params |
Paramètres incorrects fournis à la fonction interne @1 |
-104 |
335545022 |
cannot_copy_stmt |
Impossible de copier l’instruction @1 |
-104 |
335545023 |
invalid_boolean_usage |
Utilisation non valide d’une expression booléenne |
-104 |
335545035 |
svc_no_stdin |
Pas de isc_info_svc_stdin dans la demande de l’utilisateur, mais le thread de service a demandé des données stdin |
-104 |
335545037 |
svc_no_switches |
Tous les services, à l’exception de l’obtention du journal du serveur, nécessitent des commutateurs |
-104 |
335545038 |
svc_bad_size |
La taille des données stdin est supérieure à celle demandée au client |
-104 |
335545039 |
no_crypt_plugin |
Le chargement du plugin de cryptage @1 a échoué |
-104 |
335545040 |
cp_name_too_long |
La longueur du nom du plugin de cryptage ne doit pas dépasser 1 octet |
-104 |
335545045 |
null_spb |
Données NULL avec une longueur SPB non nulle |
-104 |
335545116 |
dsql_window_incompat_frames |
Si <window frame bound 1> spécifie @1, alors <window frame bound 2> ne doit pas spécifier @2 |
-104 |
335545117 |
dsql_window_range_multi_key |
La fenêtre basée sur RANGE avec <expr> {PRECEDING | FOLLOWING} ne peut pas avoir ORDER BY avec plus d’une valeur |
-104 |
335545118 |
dsql_window_range_inv_key_type |
La fenêtre basée sur une plage avec <offset> PRECEDING/FOLLOWING doit avoir une seule clé ORDER BY de type numérique, date, heure ou horodatage |
-104 |
335545119 |
dsql_window_frame_value_inv_type |
La valeur de la fenêtre RANGE/ROWS PRECEDING/FOLLOWING doit être de type numérique |
-104 |
335545205 |
no_keyholder_plugin |
Le chargement du plugin de porte-clés @1 a échoué |
-104 |
336003075 |
dsql_transitional_numeric |
La précision 10 à 18 est passée de DOUBLE PRECISION dans le dialecte SQL 1 à 64-bit scaled integer dans le dialecte SQL 3 |
-104 |
336003077 |
sql_db_dialect_dtype_unsupport |
Le dialecte SQL @1 de la base de données ne prend pas en charge la référence au type de données @2 |
-104 |
336003087 |
dsql_invalid_label |
Label @1 @2 dans la portée actuelle |
-104 |
336003088 |
dsql_datatypes_not_comparable |
Les types de données @1 ne sont pas comparables dans l’expression @2 |
-104 |
336397215 |
dsql_max_sort_items |
Impossible de trier sur plus de 255 éléments |
-104 |
336397216 |
dsql_max_group_items |
Impossible de grouper plus de 255 éléments |
-104 |
336397217 |
dsql_conflicting_sort_field |
Impossible d’inclure le même champ (@1.@2) deux fois dans la clause ORDER BY avec des options de tri conflictuelles |
-104 |
336397218 |
dsql_derived_table_more_columns |
La liste des colonnes de la table dérivée @1 a plus de colonnes que le nombre d’éléments dans son instruction SELECT |
-104 |
336397219 |
dsql_derived_table_less_columns |
La liste des colonnes de la table dérivée @1 comporte moins de colonnes que le nombre d’éléments dans son instruction SELECT |
-104 |
336397220 |
dsql_derived_field_unnamed |
Aucun nom de colonne n’est spécifié pour le numéro de colonne @1 dans la table dérivée @2 |
-104 |
336397221 |
dsql_derived_field_dup_name |
La colonne @1 a été spécifiée plusieurs fois pour la table dérivée @2 |
-104 |
336397222 |
dsql_derived_alias_select |
Erreur dsql interne : type d’alias attendu par pass1_expand_select_node |
-104 |
336397223 |
dsql_derived_alias_field |
Erreur dsql interne : type d’alias attendu par pass1_field |
-104 |
336397224 |
dsql_auto_field_bad_pos |
Internal dsql error : column position out of range in pass1_union_auto_cast |
-104 |
336397225 |
dsql_cte_wrong_reference |
Le membre CTE récursif (@1) ne peut se référer à lui-même que dans la clause FROM |
-104 |
336397226 |
dsql_cte_cycle |
L’ETC '@1' a des dépendances cycliques |
-104 |
336397227 |
dsql_cte_outer_join |
Le membre récursif du CTE ne peut pas être membre d’une jointure externe |
-104 |
336397228 |
dsql_cte_mult_references |
Un membre récursif d’un CTE ne peut pas se référencer lui-même plus d’une fois |
-104 |
336397229 |
dsql_cte_not_a_union |
L’ETC récursif (@1) doit être un UNION |
-104 |
336397230 |
dsql_cte_nonrecurs_after_recurs |
L’ETC '@1' a défini un membre non récursif après un membre récursif |
-104 |
336397231 |
dsql_cte_wrong_clause |
Le membre récursif du CTE '@1' a une clause @2 |
-104 |
336397232 |
dsql_cte_union_all |
Les membres récursifs du CTE (@1) doivent être liés à d’autres membres via UNION ALL |
-104 |
336397233 |
dsql_cte_miss_nonrecursive |
Il manque un membre non récursif dans l’ETC '@1' |
-104 |
336397234 |
dsql_cte_nested_with |
La clause WITH ne peut pas être imbriquée |
-104 |
336397235 |
dsql_col_more_than_once_using |
La colonne @1 apparaît plus d’une fois dans la clause USING |
-104 |
336397237 |
dsql_cte_not_used |
Le CTE "@1" n’est pas utilisé dans la requête |
-104 |
336397238 |
dsql_col_more_than_once_view |
La colonne @1 apparaît plus d’une fois dans ALTER VIEW |
-104 |
336397257 |
dsql_max_distinct_items |
Impossible d’avoir plus de 255 éléments dans la liste DISTINCT / UNION DISTINCT |
-104 |
336397321 |
dsql_cte_recursive_aggregate |
Le membre récursif du CTE ne peut pas utiliser la fonction aggregate ou window |
-104 |
336397326 |
dsql_wlock_simple |
WITH LOCK ne peut être utilisé qu’avec une seule table physique |
-104 |
336397327 |
dsql_firstskip_rows |
FIRST/SKIP ne peut pas être utilisé avec OFFSET/FETCH ou ROWS |
-104 |
336397328 |
dsql_wlock_aggregates |
WITH LOCK ne peut pas être utilisé avec les agrégats |
-104 |
336397329 |
dsql_wlock_conflict |
WITH LOCK ne peut pas être utilisé avec @1 |
-105 |
335544702 |
escape_invalid |
Séquence ESCAPE non valide |
-105 |
335544789 |
extract_input_mismatch |
La partie EXTRACT spécifiée n’existe pas dans le type de données d’entrée |
-105 |
335544884 |
invalid_similar_pattern |
Modèle SIMILAR TO non valide |
-150 |
335544360 |
read_only_rel |
Tentative de mise à jour d’une table en lecture seule |
-150 |
335544362 |
read_only_view |
Impossible de mettre à jour la vue en lecture seule @1 |
-150 |
335544446 |
non_updatable |
Mise à jour impossible |
-150 |
335544546 |
constaint_on_view |
Impossible de définir des contraintes sur les vues |
-151 |
335544359 |
read_only_field |
Tentative de mise à jour de la colonne @1 en lecture seule |
-155 |
335544658 |
dsql_base_table |
@1 n’est pas une table de base valide de la vue spécifiée |
-157 |
335544598 |
specify_field_err |
Doit spécifier le nom de la colonne pour l’expression de sélection de la vue |
-158 |
335544599 |
num_field_err |
Le nombre de colonnes ne correspond pas à la liste de sélection |
-162 |
335544685 |
no_dbkey |
La clé d’accès n’est pas disponible pour les vues multi-tables |
-170 |
335544512 |
prcmismat |
Non concordance des paramètres d’entrée pour la procédure @1 |
-170 |
335544619 |
extern_func_err |
Les fonctions externes ne peuvent pas avoir plus de 10 paramètres |
-170 |
335544850 |
prc_out_param_mismatch |
Erreur de paramètre de sortie pour la procédure @1 |
-170 |
335545101 |
fun_param_mismatch |
Erreur de paramètre d’entrée pour la fonction @1 |
-171 |
335544439 |
funmismat |
Impossible de faire correspondre la fonction @1 |
-171 |
335544458 |
invalid_dimension |
column not array or invalid dimensions (expected @1, encountered @2) |
-171 |
335544618 |
return_mode_err |
Mode de retour par valeur non autorisé pour ce type de données |
-171 |
335544873 |
array_max_dimensions |
Le type de données tableau peut utiliser jusqu’à @1 dimensions |
-172 |
335544438 |
funnotdef |
La fonction @1 n’est pas définie |
-172 |
335544932 |
modnotfound |
Le nom du module ou le point d’entrée n’a pas été trouvé |
-203 |
335544708 |
dyn_fld_ambiguous |
Référence de colonne ambiguë. |
-204 |
335544463 |
gennotdef |
Le générateur @1 n’est pas défini |
-204 |
335544502 |
stream_not_defined |
Référence à un numéro de flux non valide |
-204 |
335544509 |
charset_not_found |
Le jeu de caractères @1 n’est pas défini |
-204 |
335544511 |
prcnotdef |
La procédure @1 n’est pas définie |
-204 |
335544515 |
codnotdef |
Code d’état @1 inconnu |
-204 |
335544516 |
xcpnotdef |
L’exception @1 n’est pas définie |
-204 |
335544532 |
ref_cnstrnt_notfound |
Nom de la contrainte référentielle non défini dans la table des contraintes. |
-204 |
335544551 |
grant_obj_notfound |
Impossible de trouver un objet pour GRANT |
-204 |
335544568 |
text_subtype |
L’implémentation du sous-type de texte @1 n’a pas été trouvée. |
-204 |
335544573 |
dsql_datatype_err |
Type de données inconnu |
-204 |
335544580 |
dsql_relation_err |
Table inconnue |
-204 |
335544581 |
dsql_procedure_err |
Procedure unknown |
-204 |
335544588 |
collation_not_found |
COLLATION @1 for CHARACTER SET @2 is not defined |
-204 |
335544589 |
collation_not_for_charset |
COLLATION @1 is not valid for specified CHARACTER SET |
-204 |
335544595 |
dsql_trigger_err |
Trigger unknown |
-204 |
335544620 |
alias_conflict_err |
L’alias @1 est en conflit avec un alias dans la même instruction |
-204 |
335544621 |
procedure_conflict_error |
L’alias @1 est en conflit avec une procédure dans la même instruction |
-204 |
335544622 |
relation_conflict_err |
L’alias @1 est en conflit avec une table dans la même instruction |
-204 |
335544635 |
dsql_no_relation_alias |
Il n’y a pas d’alias ou de table nommée @1 à ce niveau d’étendue |
-204 |
335544636 |
indexname |
Il n’y a pas d’index @1 pour la table @2 |
-204 |
335544640 |
collation_requires_text |
Utilisation non valide de CHARACTER SET ou COLLATE |
-204 |
335544662 |
dsql_blob_type_unknown |
BLOB SUB_TYPE @1 n’est pas défini |
-204 |
335544759 |
bad_default_value |
Impossible de définir une colonne non nulle avec NULL comme valeur par défaut |
-204 |
335544760 |
invalid_clause |
Clause invalide --- '@1' |
-204 |
335544800 |
too_many_contexts |
Trop de contextes de relation/procédure/vues. Le maximum autorisé est de 256 |
-204 |
335544817 |
bad_limit_param |
Paramètre non valide pour FETCH ou FIRST. Seuls les entiers >= 0 sont autorisés. |
-204 |
335544818 |
bad_skip_param |
Paramètre non valide pour OFFSET ou SKIP. Seuls les entiers >= 0 sont autorisés. |
-204 |
335544837 |
bad_substring_offset |
Paramètre de décalage @1 incorrect pour SUBSTRING. Seuls les entiers positifs sont autorisés. |
-204 |
335544853 |
bad_substring_length |
Paramètre de longueur incorrect @1 pour SUBSTRING. Les nombres entiers négatifs ne sont pas autorisés. |
-204 |
335544854 |
charset_not_installed |
Le jeu de caractères @1 n’est pas installé |
-204 |
335544855 |
collation_not_installed |
COLLATION @1 for CHARACTER SET @2 is not installed |
-204 |
335544867 |
subtype_for_internal_use |
Blob sub_types bigger than 1 (text) are for internal use only |
-204 |
335545104 |
invalid_attachment_charset |
CHARACTER SET @1 cannot be used as a attachment character set |
-204 |
336003085 |
dsql_ambiguous_field_name |
Ambiguous field name between @1 and @2 |
-205 |
335544396 |
fldnotdef |
column @1 is not defined in table @2 |
-205 |
335544552 |
grant_fld_notfound |
could not find column for GRANT |
-205 |
335544883 |
fldnotdef2 |
column @1 is not defined in procedure @2 |
-206 |
335544578 |
dsql_field_err |
Column unknown |
-206 |
335544587 |
dsql_blob_err |
Column is not a BLOB |
-206 |
335544596 |
dsql_subselect_err |
Subselect illegal in this context |
-206 |
336397208 |
dsql_line_col_error |
At line @1, column @2 |
-206 |
336397209 |
dsql_unknown_pos |
At unknown line and column |
-206 |
336397210 |
dsql_no_dup_name |
Column @1 cannot be repeated in @2 statement |
-208 |
335544617 |
order_by_err |
invalid ORDER BY clause |
-219 |
335544395 |
relnotdef |
table @1 is not defined |
-219 |
335544872 |
domnotdef |
domain @1 is not defined |
-230 |
335544487 |
walw_err |
WAL Writer error |
-231 |
335544488 |
logh_small |
Log file header of @1 too small |
-232 |
335544489 |
logh_inv_version |
Invalid version of log file @1 |
-233 |
335544490 |
logh_open_flag |
Log file @1 not latest in the chain but open flag still set |
-234 |
335544491 |
logh_open_flag2 |
Log file @1 not closed properly; database recovery may be required |
-235 |
335544492 |
logh_diff_dbname |
Database name in the log file @1 is different |
-236 |
335544493 |
logf_unexpected_eof |
Unexpected end of log file @1 at offset @2 |
-237 |
335544494 |
logr_incomplete |
Incomplete log record at offset @1 in log file @2 |
-238 |
335544495 |
logr_header_small |
Log record header too small at offset @1 in log file @2 |
-239 |
335544496 |
logb_small |
Log block too small at offset @1 in log file @2 |
-239 |
335544691 |
cache_too_small |
Insufficient memory to allocate page buffer cache |
-239 |
335544693 |
log_too_small |
Log size too small |
-239 |
335544694 |
partition_too_small |
Log partition size too small |
-240 |
335544497 |
wal_illegal_attach |
Illegal attempt to attach to an uninitialized WAL segment for @1 |
-241 |
335544498 |
wal_invalid_wpb |
Invalid WAL parameter block option @1 |
-242 |
335544499 |
wal_err_rollover |
Cannot roll over to the next log file @1 |
-243 |
335544500 |
no_wal |
database does not use Write-ahead Log |
-244 |
335544503 |
wal_subsys_error |
WAL subsystem encountered error |
-245 |
335544504 |
wal_subsys_corrupt |
WAL subsystem corrupted |
-246 |
335544513 |
wal_bugcheck |
Database @1: WAL subsystem bug for pid @2@3 |
-247 |
335544514 |
wal_cant_expand |
Could not expand the WAL segment for database @1 |
-248 |
335544521 |
wal_err_rollover2 |
Unable to roll over please see Firebird log. |
-249 |
335544522 |
wal_err_logwrite |
WAL I/O error. Please see Firebird log. |
-250 |
335544523 |
wal_err_jrn_comm |
WAL writer - Journal server communication error. Please see Firebird log. |
-251 |
335544524 |
wal_err_expansion |
WAL buffers cannot be increased. Please see Firebird log. |
-252 |
335544525 |
wal_err_setup |
WAL setup error. Please see Firebird log. |
-253 |
335544526 |
wal_err_ww_sync |
obsolete |
-254 |
335544527 |
wal_err_ww_start |
Cannot start WAL writer for the database @1 |
-255 |
335544556 |
wal_cache_err |
Write-ahead Log without shared cache configuration not allowed |
-257 |
335544566 |
start_cm_for_wal |
WAL defined; Cache Manager must be started first |
-258 |
335544567 |
wal_ovflow_log_required |
Overflow log specification required for round-robin log |
-259 |
335544629 |
wal_shadow_err |
Write-ahead Log with shadowing configuration not allowed |
-260 |
335544690 |
cache_redef |
Cache redefined |
-260 |
335544692 |
log_redef |
Log redefined |
-261 |
335544695 |
partition_not_supp |
Partitions not supported in series of log file specification |
-261 |
335544696 |
log_length_spec |
Total length of a partitioned log must be specified |
-281 |
335544637 |
no_stream_plan |
table or procedure @1 is not referenced in plan |
-281 |
335545282 |
wrong_proc_plan |
Procedures cannot specify access type other than NATURAL in the plan |
-282 |
335544638 |
stream_twice |
table or procedure @1 is referenced more than once in plan; use aliases to distinguish |
-282 |
335544643 |
dsql_self_join |
the table @1 is referenced twice; use aliases to differentiate |
-282 |
335544659 |
duplicate_base_table |
table or procedure @1 is referenced twice in view; use an alias to distinguish |
-282 |
335544660 |
view_alias |
view @1 has more than one base table; use aliases to distinguish |
-282 |
335544710 |
complex_view |
navigational stream @1 references a view with more than one base table |
-283 |
335544639 |
stream_not_found |
table or procedure @1 is referenced in the plan but not the from list |
-284 |
335544642 |
index_unused |
index @1 cannot be used in the specified plan |
-291 |
335544531 |
primary_key_notnull |
Column used in a PRIMARY constraint must be NOT NULL. |
-291 |
335545103 |
domain_primary_key_notnull |
Domain used in the PRIMARY KEY constraint of table @1 must be NOT NULL |
-292 |
335544534 |
ref_cnstrnt_update |
Cannot update constraints (RDB$REF_CONSTRAINTS). |
-293 |
335544535 |
check_cnstrnt_update |
Cannot update constraints (RDB$CHECK_CONSTRAINTS). |
-294 |
335544536 |
check_cnstrnt_del |
Cannot delete CHECK constraint entry (RDB$CHECK_CONSTRAINTS) |
-295 |
335544545 |
rel_cnstrnt_update |
Cannot update constraints (RDB$RELATION_CONSTRAINTS). |
-296 |
335544547 |
invld_cnstrnt_type |
internal Firebird consistency check (invalid RDB$CONSTRAINT_TYPE) |
-297 |
335544558 |
check_constraint |
Operation violates CHECK constraint @1 on view or table @2 |
-313 |
335544669 |
dsql_count_mismatch |
count of column list and variable list do not match |
-313 |
336003099 |
upd_ins_doesnt_match_pk |
UPDATE OR INSERT field list does not match primary key of table @1 |
-313 |
336003100 |
upd_ins_doesnt_match_matching |
UPDATE OR INSERT field list does not match MATCHING clause |
-313 |
336003111 |
dsql_wrong_param_num |
Wrong number of parameters (expected @1, got @2) |
-313 |
336003113 |
upd_ins_cannot_default |
UPDATE OR INSERT value for field @1, part of the implicit or explicit MATCHING clause, cannot be DEFAULT |
-314 |
335544565 |
transliteration_failed |
Cannot transliterate character between character sets |
-315 |
336068815 |
dyn_dtype_invalid |
Cannot change datatype for column @1. Changing datatype is not supported for BLOB or ARRAY columns. |
-383 |
336068814 |
dyn_dependency_exists |
Column @1 from table @2 is referenced in @3 |
-401 |
335544647 |
invalid_operator |
invalid comparison operator for find operation |
-402 |
335544368 |
segstr_no_op |
attempted invalid operation on a BLOB |
-402 |
335544414 |
blobnotsup |
BLOB and array data types are not supported for @1 operation |
-402 |
335544427 |
datnotsup |
data operation not supported |
-402 |
335545262 |
cannot_update_old_blob |
cannot update old BLOB |
-402 |
335545263 |
cannot_read_new_blob |
cannot read from new BLOB |
-402 |
335545283 |
invalid_blob_util_handle |
Invalid RDB$BLOB_UTIL handle |
-402 |
335545284 |
bad_temp_blob_id |
Invalid temporary BLOB ID |
-406 |
335544457 |
out_of_bounds |
subscript out of bounds |
-406 |
335545028 |
ss_out_of_bounds |
Subscript @1 out of bounds [@2, @3] |
-407 |
335544435 |
nullsegkey |
null segment of UNIQUE KEY |
-413 |
335544334 |
convert_error |
conversion error from string "@1" |
-413 |
335544454 |
nofilter |
filter not found to convert type @1 to type @2 |
-413 |
335544860 |
blob_convert_error |
Unsupported conversion to target type BLOB (subtype @1) |
-413 |
335544861 |
array_convert_error |
Unsupported conversion to target type ARRAY |
-501 |
335544577 |
dsql_cursor_close_err |
Attempt to reclose a closed cursor |
-502 |
335544574 |
dsql_decl_err |
Invalid cursor declaration |
-502 |
335544576 |
dsql_cursor_open_err |
Attempt to reopen an open cursor |
-502 |
336003090 |
dsql_cursor_redefined |
Statement already has a cursor @1 assigned |
-502 |
336003091 |
dsql_cursor_not_found |
Cursor @1 is not found in the current context |
-502 |
336003092 |
dsql_cursor_exists |
Cursor @1 already exists in the current context |
-502 |
336003093 |
dsql_cursor_rel_ambiguous |
Relation @1 is ambiguous in cursor @2 |
-502 |
336003094 |
dsql_cursor_rel_not_found |
Relation @1 is not found in cursor @2 |
-504 |
335544572 |
dsql_cursor_err |
Invalid cursor reference |
-504 |
336003089 |
dsql_cursor_invalid |
Empty cursor name is not allowed |
-504 |
336003095 |
dsql_cursor_not_open |
Cursor is not open |
-508 |
335544348 |
no_cur_rec |
no current record for fetch operation |
-510 |
335544575 |
dsql_cursor_update_err |
Cursor @1 is not updatable |
-518 |
335544582 |
dsql_request_err |
Request unknown |
-519 |
335544688 |
dsql_open_cursor_request |
The prepare statement identifies a prepare statement with an open cursor |
-530 |
335544466 |
foreign_key |
violation of FOREIGN KEY constraint "@1" on table "@2" |
-530 |
335544838 |
foreign_key_target_doesnt_exist |
Foreign key reference target does not exist |
-530 |
335544839 |
foreign_key_references_present |
Foreign key references are present for the record |
-531 |
335544597 |
dsql_crdb_prepare_err |
Cannot prepare a CREATE DATABASE/SCHEMA statement |
-532 |
335544469 |
trans_invalid |
transaction marked invalid and cannot be committed |
-532 |
335545002 |
attachment_in_use |
Attachment is in use |
-532 |
335545003 |
transaction_in_use |
Transaction is in use |
-532 |
335545017 |
async_active |
Asynchronous call is already running for this attachment |
-551 |
335544352 |
no_priv |
no permission for @1 access to @2 @3 |
-551 |
335544790 |
insufficient_svc_privileges |
Service @1 requires SYSDBA permissions. Reattach to the Service Manager using the SYSDBA account. |
-551 |
335545033 |
trunc_limits |
expected length @1, actual @2 |
-551 |
335545034 |
info_access |
Wrong info requested in isc_svc_query() for anonymous service |
-551 |
335545036 |
svc_start_failed |
Start request for anonymous service is impossible |
-551 |
335545254 |
effective_user |
Effective user is @1 |
-552 |
335544550 |
not_rel_owner |
only the owner of a table may reassign ownership |
-552 |
335544553 |
grant_nopriv |
user does not have GRANT privileges for operation |
-552 |
335544707 |
grant_nopriv_on_base |
user does not have GRANT privileges on base table/view for operation |
-552 |
335545058 |
protect_ownership |
Only the owner can change the ownership |
-553 |
335544529 |
existing_priv_mod |
cannot modify an existing user privilege |
-595 |
335544645 |
stream_crack |
the current position is on a crack |
-596 |
335544374 |
stream_eof |
attempt to fetch past the last record in a record stream |
-596 |
335544644 |
stream_bof |
attempt to fetch before the first record in a record stream |
-596 |
335545092 |
cursor_not_positioned |
Cursor @1 is not positioned in a valid record |
-597 |
335544632 |
dsql_file_length_err |
Preceding file did not specify length, so @1 must include starting page number |
-598 |
335544633 |
dsql_shadow_number_err |
Shadow number must be a positive integer |
-599 |
335544607 |
node_err |
gen.c: node not supported |
-599 |
335544625 |
node_name_err |
A node name is not permitted in a secondary, shadow, cache or log file name |
-600 |
335544680 |
crrp_data_err |
sort error: corruption in data structure |
-601 |
335544646 |
db_or_file_exists |
database or file exists |
-604 |
335544593 |
dsql_max_arr_dim_exceeded |
Array declared with too many dimensions |
-604 |
335544594 |
dsql_arr_range_error |
Illegal array dimension range |
-605 |
335544682 |
dsql_field_ref |
Inappropriate self-reference of column |
-607 |
335544351 |
no_meta_update |
unsuccessful metadata update |
-607 |
335544549 |
systrig_update |
cannot modify or erase a system trigger |
-607 |
335544657 |
dsql_no_blob_array |
Array/BLOB/DATE data types not allowed in arithmetic |
-607 |
335544746 |
reftable_requires_pk |
"REFERENCES table" without "(column)" requires PRIMARY KEY on referenced table |
-607 |
335544815 |
generator_name |
GENERATOR @1 |
-607 |
335544816 |
udf_name |
Function @1 |
-607 |
335544858 |
must_have_phys_field |
Can’t have relation with only computed fields or constraints |
-607 |
336003074 |
dsql_dbkey_from_non_table |
Cannot SELECT RDB$DB_KEY from a stored procedure. |
-607 |
336003086 |
dsql_udf_return_pos_err |
External function should have return position between 1 and @1 |
-607 |
336003096 |
dsql_type_not_supp_ext_tab |
Data type @1 is not supported for EXTERNAL TABLES. Relation '@2', field '@3' |
-607 |
336003104 |
dsql_record_version_table |
To be used with RDB$RECORD_VERSION, @1 must be a table or a view of single table |
-607 |
336068845 |
dyn_cannot_del_syscoll |
Cannot delete system collation |
-607 |
336068866 |
dyn_cannot_mod_sysproc |
Cannot ALTER or DROP system procedure @1 |
-607 |
336068867 |
dyn_cannot_mod_systrig |
Cannot ALTER or DROP system trigger @1 |
-607 |
336068868 |
dyn_cannot_mod_sysfunc |
Cannot ALTER or DROP system function @1 |
-607 |
336068869 |
dyn_invalid_ddl_proc |
Invalid DDL statement for procedure @1 |
-607 |
336068870 |
dyn_invalid_ddl_trig |
Invalid DDL statement for trigger @1 |
-607 |
336068878 |
dyn_invalid_ddl_func |
Invalid DDL statement for function @1 |
-607 |
336397206 |
dsql_table_not_found |
Table @1 does not exist |
-607 |
336397207 |
dsql_view_not_found |
View @1 does not exist |
-607 |
336397212 |
dsql_no_array_computed |
Array and BLOB data types not allowed in computed field |
-607 |
336397214 |
dsql_only_can_subscript_array |
scalar operator used on field @1 which is not an array |
-612 |
336068812 |
dyn_domain_name_exists |
Cannot rename domain @1 to @2. A domain with that name already exists. |
-612 |
336068813 |
dyn_field_name_exists |
Cannot rename column @1 to @2. A column with that name already exists in table @3. |
-615 |
335544475 |
relation_lock |
lock on table @1 conflicts with existing lock |
-615 |
335544476 |
record_lock |
requested record lock conflicts with existing lock |
-615 |
335544501 |
drop_wal |
cannot drop log file when journaling is enabled |
-615 |
335544507 |
range_in_use |
refresh range number @1 already in use |
-616 |
335544530 |
primary_key_ref |
Cannot delete PRIMARY KEY being used in FOREIGN KEY definition. |
-616 |
335544539 |
integ_index_del |
Cannot delete index used by an Integrity Constraint |
-616 |
335544540 |
integ_index_mod |
Cannot modify index used by an Integrity Constraint |
-616 |
335544541 |
check_trig_del |
Cannot delete trigger used by a CHECK Constraint |
-616 |
335544543 |
cnstrnt_fld_del |
Cannot delete column being used in an Integrity Constraint. |
-616 |
335544630 |
dependency |
there are @1 dependencies |
-616 |
335544674 |
del_last_field |
last column in a table cannot be deleted |
-616 |
335544728 |
integ_index_deactivate |
Cannot deactivate index used by an integrity constraint |
-616 |
335544729 |
integ_deactivate_primary |
Cannot deactivate index used by a PRIMARY/UNIQUE constraint |
-617 |
335544542 |
check_trig_update |
Cannot update trigger used by a CHECK Constraint |
-617 |
335544544 |
cnstrnt_fld_rename |
Cannot rename column being used in an Integrity Constraint. |
-618 |
335544537 |
integ_index_seg_del |
Cannot delete index segment used by an Integrity Constraint |
-618 |
335544538 |
integ_index_seg_mod |
Cannot update index segment used by an Integrity Constraint |
-625 |
335544347 |
not_valid |
validation error for column @1, value "@2" |
-625 |
335544879 |
not_valid_for_var |
validation error for variable @1, value "@2" |
-625 |
335544880 |
not_valid_for |
validation error for @1, value "@2" |
-637 |
335544664 |
dsql_duplicate_spec |
duplicate specification of @1 - not supported |
-637 |
336397213 |
dsql_implicit_domain_name |
Implicit domain name @1 not allowed in user created domain |
-660 |
335544533 |
foreign_key_notfound |
Non-existent PRIMARY or UNIQUE KEY specified for FOREIGN KEY. |
-660 |
335544628 |
idx_create_err |
cannot create index @1 |
-660 |
336003098 |
primary_key_required |
Primary key required on table @1 |
-663 |
335544624 |
idx_seg_err |
segment count of 0 defined for index @1 |
-663 |
335544631 |
idx_key_err |
too many keys defined for index @1 |
-663 |
335544672 |
key_field_err |
too few key columns found for index @1 (incorrect column name?) |
-664 |
335544434 |
keytoobig |
key size exceeds implementation restriction for index "@1" |
-677 |
335544445 |
ext_err |
@1 extension error |
-685 |
335544465 |
bad_segstr_type |
invalid BLOB type for operation |
-685 |
335544670 |
blob_idx_err |
attempt to index BLOB column in index @1 |
-685 |
335544671 |
array_idx_err |
attempt to index array column in index @1 |
-689 |
335544403 |
badpagtyp |
page @1 is of wrong type (expected @2, found @3) |
-689 |
335544650 |
page_type_err |
wrong page type |
-690 |
335544679 |
no_segments_err |
segments not allowed in expression index @1 |
-691 |
335544681 |
rec_size_err |
new record size of @1 bytes is too big |
-692 |
335544477 |
max_idx |
maximum indexes per table (@1) exceeded |
-693 |
335544663 |
req_max_clones_exceeded |
Too many concurrent executions of the same request |
-694 |
335544684 |
no_field_access |
cannot access column @1 in view @2 |
-802 |
335544321 |
arith_except |
arithmetic exception, numeric overflow, or string truncation |
-802 |
335544836 |
concat_overflow |
Concatenation overflow. Resulting string cannot exceed 32765 bytes in length. |
-802 |
335544914 |
string_truncation |
string right truncation |
-802 |
335544915 |
blob_truncation |
blob truncation when converting to a string: length limit exceeded |
-802 |
335544916 |
numeric_out_of_range |
numeric value is out of range |
-802 |
336003105 |
dsql_invalid_sqlda_version |
SQLDA version expected between @1 and @2, found @3 |
-802 |
336003106 |
dsql_sqlvar_index |
at SQLVAR index @1 |
-802 |
336003107 |
dsql_no_sqlind |
empty pointer to NULL indicator variable |
-802 |
336003108 |
dsql_no_sqldata |
empty pointer to data |
-802 |
336003109 |
dsql_no_input_sqlda |
No SQLDA for input values provided |
-802 |
336003110 |
dsql_no_output_sqlda |
No SQLDA for output values provided |
-803 |
335544349 |
no_dup |
attempt to store duplicate value (visible to active transactions) in unique index "@1" |
-803 |
335544665 |
unique_key_violation |
violation of PRIMARY or UNIQUE KEY constraint "@1" on table "@2" |
-804 |
335544380 |
wronumarg |
wrong number of arguments on call |
-804 |
335544583 |
dsql_sqlda_err |
SQLDA error |
-804 |
335544584 |
dsql_var_count_err |
Count of read-write columns does not equal count of values |
-804 |
335544586 |
dsql_function_err |
Function unknown |
-804 |
335544713 |
dsql_sqlda_value_err |
Incorrect values within SQLDA structure |
-804 |
335545050 |
wrong_message_length |
Message length passed from user application does not match set of columns |
-804 |
335545051 |
no_output_format |
Resultset is missing output format information |
-804 |
335545052 |
item_finish |
Message metadata not ready - item @1 is not finished |
-804 |
335545100 |
interface_version_too_old |
Interface @3 version too old: expected @1, found @2 |
-804 |
336003097 |
dsql_feature_not_supported_ods |
Feature not supported on ODS version older than @1.@2 |
-804 |
336397205 |
dsql_too_old_ods |
ODS versions before ODS@1 are not supported |
-806 |
335544600 |
col_name_err |
Only simple column names permitted for VIEW WITH CHECK OPTION |
-807 |
335544601 |
where_err |
No WHERE clause for VIEW WITH CHECK OPTION |
-808 |
335544602 |
table_view_err |
Only one table allowed for VIEW WITH CHECK OPTION |
-809 |
335544603 |
distinct_err |
DISTINCT, GROUP or HAVING not permitted for VIEW WITH CHECK OPTION |
-810 |
335544605 |
subquery_err |
No subqueries permitted for VIEW WITH CHECK OPTION |
-811 |
335544652 |
sing_select_err |
multiple rows in singleton select |
-811 |
335545269 |
merge_dup_update |
Multiple source records cannot match the same target during MERGE |
-816 |
335544651 |
ext_readonly_err |
Cannot insert because the file is readonly or is on a read only medium. |
-816 |
335544715 |
extfile_uns_op |
Operation not supported for EXTERNAL FILE table @1 |
-817 |
335544361 |
read_only_trans |
attempted update during read-only transaction |
-817 |
335544371 |
segstr_no_write |
attempted write to read-only BLOB |
-817 |
335544444 |
read_only |
operation not supported |
-817 |
335544765 |
read_only_database |
attempted update on read-only database |
-817 |
335544766 |
must_be_dialect_2_and_up |
SQL dialect @1 is not supported in this database |
-817 |
335544793 |
ddl_not_allowed_by_db_sql_dial |
Metadata update statement is not allowed by the current database SQL dialect @1 |
-817 |
336003079 |
sql_dialect_conflict_num |
DB dialect @1 and client dialect @2 conflict with respect to numeric precision @3. |
-817 |
336003101 |
upd_ins_with_complex_view |
UPDATE OR INSERT without MATCHING could not be used with views based on more than one table |
-817 |
336003102 |
dsql_incompatible_trigger_type |
Incompatible trigger type |
-817 |
336003103 |
dsql_db_trigger_type_cant_change |
Database trigger type can’t be changed |
-817 |
336003112 |
dsql_invalid_drop_ss_clause |
Invalid DROP SQL SECURITY clause |
-820 |
335544356 |
obsolete_metadata |
metadata is obsolete |
-820 |
335544379 |
wrong_ods |
unsupported on-disk structure for file @1; found @2.@3, support @4.@5 |
-820 |
335544437 |
wrodynver |
wrong DYN version |
-820 |
335544467 |
high_minor |
minor version too high found @1 expected @2 |
-820 |
335544881 |
need_difference |
Difference file name should be set explicitly for database on raw device |
-823 |
335544473 |
invalid_bookmark |
invalid bookmark handle |
-824 |
335544474 |
bad_lock_level |
invalid lock level @1 |
-825 |
335544519 |
bad_lock_handle |
invalid lock handle |
-826 |
335544585 |
dsql_stmt_handle |
Invalid statement handle |
-827 |
335544655 |
invalid_direction |
invalid direction for find operation |
-827 |
335544718 |
invalid_key |
Invalid key for find operation |
-828 |
335544678 |
inval_key_posn |
invalid key position |
-829 |
335544616 |
field_ref_err |
invalid column reference |
-829 |
336068816 |
dyn_char_fld_too_small |
New size specified for column @1 must be at least @2 characters. |
-829 |
336068817 |
dyn_invalid_dtype_conversion |
Cannot change datatype for @1. Conversion from base type @2 to @3 is not supported. |
-829 |
336068818 |
dyn_dtype_conv_invalid |
Cannot change datatype for column @1 from a character type to a non-character type. |
-829 |
336068829 |
max_coll_per_charset |
Maximum number of collations per character set exceeded |
-829 |
336068830 |
invalid_coll_attr |
Invalid collation attributes |
-829 |
336068852 |
dyn_scale_too_big |
New scale specified for column @1 must be at most @2. |
-829 |
336068853 |
dyn_precision_too_small |
New precision specified for column @1 must be at least @2. |
-829 |
336068857 |
dyn_cannot_addrem_computed |
Cannot add or remove COMPUTED from column @1 |
-830 |
335544615 |
field_aggregate_err |
column used with aggregate |
-831 |
335544548 |
primary_key_exists |
Attempt to define a second PRIMARY KEY for the same table |
-832 |
335544604 |
key_field_count_err |
FOREIGN KEY column count does not match PRIMARY KEY |
-833 |
335544606 |
expression_eval_err |
expression evaluation not supported |
-833 |
335544810 |
date_range_exceeded |
value exceeds the range for valid dates |
-833 |
335544912 |
time_range_exceeded |
value exceeds the range for a valid time |
-833 |
335544913 |
datetime_range_exceeded |
value exceeds the range for valid timestamps |
-833 |
335544937 |
invalid_type_datetime_op |
Invalid data type in DATE/TIME/TIMESTAMP addition or subtraction in add_datettime() |
-833 |
335544938 |
onlycan_add_timetodate |
Only a TIME value can be added to a DATE value |
-833 |
335544939 |
onlycan_add_datetotime |
Only a DATE value can be added to a TIME value |
-833 |
335544940 |
onlycansub_tstampfromtstamp |
TIMESTAMP values can be subtracted only from another TIMESTAMP value |
-833 |
335544941 |
onlyoneop_mustbe_tstamp |
Only one operand can be of type TIMESTAMP |
-833 |
335544942 |
invalid_extractpart_time |
Only HOUR, MINUTE, SECOND and MILLISECOND can be extracted from TIME values |
-833 |
335544943 |
invalid_extractpart_date |
HOUR, MINUTE, SECOND and MILLISECOND cannot be extracted from DATE values |
-833 |
335544944 |
invalidarg_extract |
Invalid argument for EXTRACT() not being of DATE/TIME/TIMESTAMP type |
-833 |
335544945 |
sysf_argmustbe_exact |
Arguments for @1 must be integral types or NUMERIC/DECIMAL without scale |
-833 |
335544946 |
sysf_argmustbe_exact_or_fp |
First argument for @1 must be integral type or floating point type |
-833 |
335544947 |
sysf_argviolates_uuidtype |
Human readable UUID argument for @1 must be of string type |
-833 |
335544948 |
sysf_argviolates_uuidlen |
Human readable UUID argument for @2 must be of exact length @1 |
-833 |
335544949 |
sysf_argviolates_uuidfmt |
Human readable UUID argument for @3 must have "-" at position @2 instead of "@1" |
-833 |
335544950 |
sysf_argviolates_guidigits |
Human readable UUID argument for @3 must have hex digit at position @2 instead of "@1" |
-833 |
335544951 |
sysf_invalid_addpart_time |
Only HOUR, MINUTE, SECOND and MILLISECOND can be added to TIME values in @1 |
-833 |
335544952 |
sysf_invalid_add_datetime |
Invalid data type in addition of part to DATE/TIME/TIMESTAMP in @1 |
-833 |
335544953 |
sysf_invalid_addpart_dtime |
Invalid part @1 to be added to a DATE/TIME/TIMESTAMP value in @2 |
-833 |
335544954 |
sysf_invalid_add_dtime_rc |
Expected DATE/TIME/TIMESTAMP type in evlDateAdd() result |
-833 |
335544955 |
sysf_invalid_diff_dtime |
Expected DATE/TIME/TIMESTAMP type as first and second argument to @1 |
-833 |
335544956 |
sysf_invalid_timediff |
The result of TIME-<value> in @1 cannot be expressed in YEAR, MONTH, DAY or WEEK |
-833 |
335544957 |
sysf_invalid_tstamptimediff |
The result of TIME-TIMESTAMP or TIMESTAMP-TIME in @1 cannot be expressed in HOUR, MINUTE, SECOND or MILLISECOND |
-833 |
335544958 |
sysf_invalid_datetimediff |
The result of DATE-TIME or TIME-DATE in @1 cannot be expressed in HOUR, MINUTE, SECOND and MILLISECOND |
-833 |
335544959 |
sysf_invalid_diffpart |
Invalid part @1 to express the difference between two DATE/TIME/TIMESTAMP values in @2 |
-833 |
335544960 |
sysf_argmustbe_positive |
Argument for @1 must be positive |
-833 |
335544961 |
sysf_basemustbe_positive |
Base for @1 must be positive |
-833 |
335544962 |
sysf_argnmustbe_nonneg |
Argument #@1 for @2 must be zero or positive |
-833 |
335544963 |
sysf_argnmustbe_positive |
Argument #@1 for @2 must be positive |
-833 |
335544964 |
sysf_invalid_zeropowneg |
Base for @1 cannot be zero if exponent is negative |
-833 |
335544965 |
sysf_invalid_negpowfp |
Base for @1 cannot be negative if exponent is not an integral value |
-833 |
335544966 |
sysf_invalid_scale |
The numeric scale must be between -128 and 127 in @1 |
-833 |
335544967 |
sysf_argmustbe_nonneg |
Argument for @1 must be zero or positive |
-833 |
335544968 |
sysf_binuuid_mustbe_str |
Binary UUID argument for @1 must be of string type |
-833 |
335544969 |
sysf_binuuid_wrongsize |
Binary UUID argument for @2 must use @1 bytes |
-833 |
335544976 |
sysf_argmustbe_nonzero |
Argument for @1 must be different than zero |
-833 |
335544977 |
sysf_argmustbe_range_inc1_1 |
Argument for @1 must be in the range [-1, 1] |
-833 |
335544978 |
sysf_argmustbe_gteq_one |
Argument for @1 must be greater or equal than one |
-833 |
335544979 |
sysf_argmustbe_range_exc1_1 |
Argument for @1 must be in the range ]-1, 1[ |
-833 |
335544981 |
sysf_fp_overflow |
Floating point overflow in built-in function @1 |
-833 |
335545009 |
sysf_invalid_trig_namespace |
Invalid usage of context namespace DDL_TRIGGER |
-833 |
335545024 |
sysf_argscant_both_be_zero |
Arguments for @1 cannot both be zero |
-833 |
335545046 |
max_args_exceeded |
Maximum (@1) number of arguments exceeded for function @2 |
-833 |
335545120 |
window_frame_value_invalid |
Invalid PRECEDING or FOLLOWING offset in window function: cannot be negative |
-833 |
335545121 |
dsql_window_not_found |
Window @1 not found |
-833 |
335545122 |
dsql_window_cant_overr_part |
Cannot use PARTITION BY clause while overriding the window @1 |
-833 |
335545123 |
dsql_window_cant_overr_order |
Cannot use ORDER BY clause while overriding the window @1 which already has an ORDER BY clause |
-833 |
335545124 |
dsql_window_cant_overr_frame |
Cannot override the window @1 because it has a frame clause. Tip: it can be used without parenthesis in OVER |
-833 |
335545125 |
dsql_window_duplicate |
Duplicate window definition for @1 |
-833 |
335545156 |
sysf_invalid_first_last_part |
Invalid part @1 to calculate the @1 of a DATE/TIMESTAMP |
-833 |
335545157 |
sysf_invalid_date_timestamp |
Expected DATE/TIMESTAMP value in @1 |
-833 |
336397240 |
dsql_eval_unknode |
Unknown node type @1 in dsql/GEN_expr |
-833 |
336397241 |
dsql_agg_wrongarg |
Argument for @1 in dialect 1 must be string or numeric |
-833 |
336397242 |
dsql_agg2_wrongarg |
Argument for @1 in dialect 3 must be numeric |
-833 |
336397243 |
dsql_nodateortime_pm_string |
Strings cannot be added to or subtracted from DATE or TIME types |
-833 |
336397244 |
dsql_invalid_datetime_subtract |
Invalid data type for subtraction involving DATE, TIME or TIMESTAMP types |
-833 |
336397245 |
dsql_invalid_dateortime_add |
Adding two DATE values or two TIME values is not allowed |
-833 |
336397246 |
dsql_invalid_type_minus_date |
DATE value cannot be subtracted from the provided data type |
-833 |
336397247 |
dsql_nostring_addsub_dial3 |
Strings cannot be added or subtracted in dialect 3 |
-833 |
336397248 |
dsql_invalid_type_addsub_dial3 |
Invalid data type for addition or subtraction in dialect 3 |
-833 |
336397249 |
dsql_invalid_type_multip_dial1 |
Invalid data type for multiplication in dialect 1 |
-833 |
336397250 |
dsql_nostring_multip_dial3 |
Strings cannot be multiplied in dialect 3 |
-833 |
336397251 |
dsql_invalid_type_multip_dial3 |
Invalid data type for multiplication in dialect 3 |
-833 |
336397252 |
dsql_mustuse_numeric_div_dial1 |
Division in dialect 1 must be between numeric data types |
-833 |
336397253 |
dsql_nostring_div_dial3 |
Strings cannot be divided in dialect 3 |
-833 |
336397254 |
dsql_invalid_type_div_dial3 |
Invalid data type for division in dialect 3 |
-833 |
336397255 |
dsql_nostring_neg_dial3 |
Strings cannot be negated (applied the minus operator) in dialect 3 |
-833 |
336397256 |
dsql_invalid_type_neg |
Invalid data type for negation (minus operator) |
-834 |
335544508 |
range_not_found |
refresh range number @1 not found |
-835 |
335544649 |
bad_checksum |
bad checksum |
-836 |
335544517 |
except |
exception @1 |
-836 |
335544848 |
except2 |
exception @1 |
-836 |
335545016 |
formatted_exception |
@1 |
-837 |
335544518 |
cache_restart |
restart shared cache manager |
-838 |
335544560 |
shutwarn |
database @1 shutdown in @2 seconds |
-839 |
335544686 |
jrn_format_err |
journal file wrong format |
-840 |
335544687 |
jrn_file_full |
intermediate journal file full |
-841 |
335544677 |
version_err |
too many versions |
-842 |
335544697 |
precision_err |
Precision must be from 1 to 18 |
-842 |
335544698 |
scale_nogt |
Scale must be between zero and precision |
-842 |
335544699 |
expec_short |
Short integer expected |
-842 |
335544700 |
expec_long |
Long integer expected |
-842 |
335544701 |
expec_ushort |
Unsigned short integer expected |
-842 |
335544712 |
expec_positive |
Positive value expected |
-842 |
335545138 |
decprecision_err |
DecFloat precision must be 16 or 34 |
-842 |
335545158 |
precision_err2 |
Precision must be from @1 to @2 |
-901 |
335544322 |
bad_dbkey |
invalid database key |
-901 |
335544326 |
bad_dpb_form |
unrecognized database parameter block |
-901 |
335544327 |
bad_req_handle |
invalid request handle |
-901 |
335544328 |
bad_segstr_handle |
invalid BLOB handle |
-901 |
335544329 |
bad_segstr_id |
invalid BLOB ID |
-901 |
335544330 |
bad_tpb_content |
invalid parameter in transaction parameter block |
-901 |
335544331 |
bad_tpb_form |
invalid format for transaction parameter block |
-901 |
335544332 |
bad_trans_handle |
invalid transaction handle (expecting explicit transaction start) |
-901 |
335544337 |
excess_trans |
attempt to start more than @1 transactions |
-901 |
335544339 |
infinap |
information type inappropriate for object specified |
-901 |
335544340 |
infona |
no information of this type available for object specified |
-901 |
335544341 |
infunk |
unknown information item |
-901 |
335544342 |
integ_fail |
action cancelled by trigger (@1) to preserve data integrity |
-901 |
335544345 |
lock_conflict |
lock conflict on no wait transaction |
-901 |
335544350 |
no_finish |
program attempted to exit without finishing database |
-901 |
335544353 |
no_recon |
transaction is not in limbo |
-901 |
335544355 |
no_segstr_close |
BLOB was not closed |
-901 |
335544357 |
open_trans |
cannot disconnect database with open transactions (@1 active) |
-901 |
335544358 |
port_len |
message length error (encountered @1, expected @2) |
-901 |
335544363 |
req_no_trans |
no transaction for request |
-901 |
335544364 |
req_sync |
request synchronization error |
-901 |
335544365 |
req_wrong_db |
request referenced an unavailable database |
-901 |
335544369 |
segstr_no_read |
attempted read of a new, open BLOB |
-901 |
335544370 |
segstr_no_trans |
attempted action on BLOB outside transaction |
-901 |
335544372 |
segstr_wrong_db |
attempted reference to BLOB in unavailable database |
-901 |
335544376 |
unres_rel |
table @1 was omitted from the transaction reserving list |
-901 |
335544377 |
uns_ext |
request includes a DSRI extension not supported in this implementation |
-901 |
335544378 |
wish_list |
feature is not supported |
-901 |
335544382 |
random |
@1 |
-901 |
335544383 |
fatal_conflict |
unrecoverable conflict with limbo transaction @1 |
-901 |
335544392 |
bdbincon |
internal error |
-901 |
335544407 |
dbbnotzer |
database handle not zero |
-901 |
335544408 |
tranotzer |
transaction handle not zero |
-901 |
335544418 |
trainlim |
transaction in limbo |
-901 |
335544419 |
notinlim |
transaction not in limbo |
-901 |
335544420 |
traoutsta |
transaction outstanding |
-901 |
335544428 |
badmsgnum |
undefined message number |
-901 |
335544431 |
blocking_signal |
blocking signal has been received |
-901 |
335544442 |
noargacc_read |
database system cannot read argument @1 |
-901 |
335544443 |
noargacc_write |
database system cannot write argument @1 |
-901 |
335544450 |
misc_interpreted |
@1 |
-901 |
335544468 |
tra_state |
transaction @1 is @2 |
-901 |
335544485 |
bad_stmt_handle |
invalid statement handle |
-901 |
335544510 |
lock_timeout |
lock time-out on wait transaction |
-901 |
335544559 |
bad_svc_handle |
invalid service handle |
-901 |
335544561 |
wrospbver |
wrong version of service parameter block |
-901 |
335544562 |
bad_spb_form |
unrecognized service parameter block |
-901 |
335544563 |
svcnotdef |
service @1 is not defined |
-901 |
335544609 |
index_name |
INDEX @1 |
-901 |
335544610 |
exception_name |
EXCEPTION @1 |
-901 |
335544611 |
field_name |
COLUMN @1 |
-901 |
335544613 |
union_err |
union not supported |
-901 |
335544614 |
dsql_construct_err |
Unsupported DSQL construct |
-901 |
335544623 |
dsql_domain_err |
Illegal use of keyword VALUE |
-901 |
335544626 |
table_name |
TABLE @1 |
-901 |
335544627 |
proc_name |
PROCEDURE @1 |
-901 |
335544641 |
dsql_domain_not_found |
Specified domain or source column @1 does not exist |
-901 |
335544656 |
dsql_var_conflict |
variable @1 conflicts with parameter in same procedure |
-901 |
335544666 |
srvr_version_too_old |
server version too old to support all CREATE DATABASE options |
-901 |
335544673 |
no_delete |
cannot delete |
-901 |
335544675 |
sort_err |
sort error |
-901 |
335544703 |
svcnoexe |
service @1 does not have an associated executable |
-901 |
335544704 |
net_lookup_err |
Failed to locate host machine. |
-901 |
335544705 |
service_unknown |
Undefined service @1/@2. |
-901 |
335544706 |
host_unknown |
The specified name was not found in the hosts file or Domain Name Services. |
-901 |
335544711 |
unprepared_stmt |
Attempt to execute an unprepared dynamic SQL statement. |
-901 |
335544716 |
svc_in_use |
Service is currently busy: @1 |
-901 |
335544719 |
net_init_error |
Error initializing the network software. |
-901 |
335544720 |
loadlib_failure |
Unable to load required library @1. |
-901 |
335544731 |
tra_must_sweep |
|
-901 |
335544740 |
udf_exception |
A fatal exception occurred during the execution of a user defined function. |
-901 |
335544741 |
lost_db_connection |
connection lost to database |
-901 |
335544742 |
no_write_user_priv |
User cannot write to RDB$USER_PRIVILEGES |
-901 |
335544767 |
blob_filter_exception |
A fatal exception occurred during the execution of a blob filter. |
-901 |
335544768 |
exception_access_violation |
Access violation. The code attempted to access a virtual address without privilege to do so. |
-901 |
335544769 |
exception_datatype_missalignment |
Datatype misalignment. The attempted to read or write a value that was not stored on a memory boundary. |
-901 |
335544770 |
exception_array_bounds_exceeded |
Array bounds exceeded. The code attempted to access an array element that is out of bounds. |
-901 |
335544771 |
exception_float_denormal_operand |
Float denormal operand. One of the floating-point operands is too small to represent a standard float value. |
-901 |
335544772 |
exception_float_divide_by_zero |
Floating-point divide by zero. The code attempted to divide a floating-point value by zero. |
-901 |
335544773 |
exception_float_inexact_result |
Floating-point inexact result. The result of a floating-point operation cannot be represented as a decimal fraction. |
-901 |
335544774 |
exception_float_invalid_operand |
Floating-point invalid operand. An indeterminant error occurred during a floating-point operation. |
-901 |
335544775 |
exception_float_overflow |
Floating-point overflow. The exponent of a floating-point operation is greater than the magnitude allowed. |
-901 |
335544776 |
exception_float_stack_check |
Floating-point stack check. The stack overflowed or underflowed as the result of a floating-point operation. |
-901 |
335544777 |
exception_float_underflow |
Floating-point underflow. The exponent of a floating-point operation is less than the magnitude allowed. |
-901 |
335544778 |
exception_integer_divide_by_zero |
Integer divide by zero. The code attempted to divide an integer value by an integer divisor of zero. |
-901 |
335544779 |
exception_integer_overflow |
Integer overflow. The result of an integer operation caused the most significant bit of the result to carry. |
-901 |
335544780 |
exception_unknown |
An exception occurred that does not have a description. Exception number @1. |
-901 |
335544781 |
exception_stack_overflow |
Stack overflow. The resource requirements of the runtime stack have exceeded the memory available to it. |
-901 |
335544782 |
exception_sigsegv |
Segmentation Fault. The code attempted to access memory without privileges. |
-901 |
335544783 |
exception_sigill |
Illegal Instruction. The Code attempted to perform an illegal operation. |
-901 |
335544784 |
exception_sigbus |
Bus Error. The Code caused a system bus error. |
-901 |
335544785 |
exception_sigfpe |
Floating Point Error. The Code caused an Arithmetic Exception or a floating point exception. |
-901 |
335544786 |
ext_file_delete |
Cannot delete rows from external files. |
-901 |
335544787 |
ext_file_modify |
Cannot update rows in external files. |
-901 |
335544788 |
adm_task_denied |
Unable to perform operation |
-901 |
335544794 |
cancelled |
operation was cancelled |
-901 |
335544797 |
svcnouser |
user name and password are required while attaching to the services manager |
-901 |
335544801 |
datype_notsup |
data type not supported for arithmetic |
-901 |
335544803 |
dialect_not_changed |
Database dialect not changed. |
-901 |
335544804 |
database_create_failed |
Unable to create database @1 |
-901 |
335544805 |
inv_dialect_specified |
Database dialect @1 is not a valid dialect. |
-901 |
335544806 |
valid_db_dialects |
Valid database dialects are @1. |
-901 |
335544811 |
inv_client_dialect_specified |
passed client dialect @1 is not a valid dialect. |
-901 |
335544812 |
valid_client_dialects |
Valid client dialects are @1. |
-901 |
335544814 |
service_not_supported |
Services functionality will be supported in a later version of the product |
-901 |
335544820 |
invalid_savepoint |
Unable to find savepoint with name @1 in transaction context |
-901 |
335544835 |
bad_shutdown_mode |
Target shutdown mode is invalid for database "@1" |
-901 |
335544840 |
no_update |
cannot update |
-901 |
335544842 |
stack_trace |
@1 |
-901 |
335544843 |
ctx_var_not_found |
Context variable '@1' is not found in namespace '@2' |
-901 |
335544844 |
ctx_namespace_invalid |
Invalid namespace name '@1' passed to @2 |
-901 |
335544845 |
ctx_too_big |
Too many context variables |
-901 |
335544846 |
ctx_bad_argument |
Invalid argument passed to @1 |
-901 |
335544847 |
identifier_too_long |
BLR syntax error. Identifier @1… is too long |
-901 |
335544859 |
invalid_time_precision |
Time precision exceeds allowed range (0-@1) |
-901 |
335544866 |
met_wrong_gtt_scope |
@1 cannot depend on @2 |
-901 |
335544868 |
illegal_prc_type |
Procedure @1 is not selectable (it does not contain a SUSPEND statement) |
-901 |
335544869 |
invalid_sort_datatype |
Datatype @1 is not supported for sorting operation |
-901 |
335544870 |
collation_name |
COLLATION @1 |
-901 |
335544871 |
domain_name |
DOMAIN @1 |
-901 |
335544874 |
max_db_per_trans_allowed |
A multi database transaction cannot span more than @1 databases |
-901 |
335544876 |
bad_proc_BLR |
Error while parsing procedure @1’s BLR |
-901 |
335544877 |
key_too_big |
index key too big |
-901 |
335544885 |
bad_teb_form |
Invalid TEB format |
-901 |
335544886 |
tpb_multiple_txn_isolation |
Found more than one transaction isolation in TPB |
-901 |
335544887 |
tpb_reserv_before_table |
Table reservation lock type @1 requires table name before in TPB |
-901 |
335544888 |
tpb_multiple_spec |
Found more than one @1 specification in TPB |
-901 |
335544889 |
tpb_option_without_rc |
Option @1 requires READ COMMITTED isolation in TPB |
-901 |
335544890 |
tpb_conflicting_options |
Option @1 is not valid if @2 was used previously in TPB |
-901 |
335544891 |
tpb_reserv_missing_tlen |
Table name length missing after table reservation @1 in TPB |
-901 |
335544892 |
tpb_reserv_long_tlen |
Table name length @1 is too long after table reservation @2 in TPB |
-901 |
335544893 |
tpb_reserv_missing_tname |
Table name length @1 without table name after table reservation @2 in TPB |
-901 |
335544894 |
tpb_reserv_corrup_tlen |
Table name length @1 goes beyond the remaining TPB size after table reservation @2 |
-901 |
335544895 |
tpb_reserv_null_tlen |
Table name length is zero after table reservation @1 in TPB |
-901 |
335544896 |
tpb_reserv_relnotfound |
Table or view @1 not defined in system tables after table reservation @2 in TPB |
-901 |
335544897 |
tpb_reserv_baserelnotfound |
Base table or view @1 for view @2 not defined in system tables after table reservation @3 in TPB |
-901 |
335544898 |
tpb_missing_len |
Option length missing after option @1 in TPB |
-901 |
335544899 |
tpb_missing_value |
Option length @1 without value after option @2 in TPB |
-901 |
335544900 |
tpb_corrupt_len |
Option length @1 goes beyond the remaining TPB size after option @2 |
-901 |
335544901 |
tpb_null_len |
Option length is zero after table reservation @1 in TPB |
-901 |
335544902 |
tpb_overflow_len |
Option length @1 exceeds the range for option @2 in TPB |
-901 |
335544903 |
tpb_invalid_value |
Option value @1 is invalid for the option @2 in TPB |
-901 |
335544904 |
tpb_reserv_stronger_wng |
Preserving previous table reservation @1 for table @2, stronger than new @3 in TPB |
-901 |
335544905 |
tpb_reserv_stronger |
Table reservation @1 for table @2 already specified and is stronger than new @3 in TPB |
-901 |
335544906 |
tpb_reserv_max_recursion |
Table reservation reached maximum recursion of @1 when expanding views in TPB |
-901 |
335544907 |
tpb_reserv_virtualtbl |
Table reservation in TPB cannot be applied to @1 because it’s a virtual table |
-901 |
335544908 |
tpb_reserv_systbl |
Table reservation in TPB cannot be applied to @1 because it’s a system table |
-901 |
335544909 |
tpb_reserv_temptbl |
Table reservation @1 or @2 in TPB cannot be applied to @3 because it’s a temporary table |
-901 |
335544910 |
tpb_readtxn_after_writelock |
Cannot set the transaction in read only mode after a table reservation isc_tpb_lock_write in TPB |
-901 |
335544911 |
tpb_writelock_after_readtxn |
Cannot take a table reservation isc_tpb_lock_write in TPB because the transaction is in read only mode |
-901 |
335544917 |
shutdown_timeout |
Firebird shutdown is still in progress after the specified timeout |
-901 |
335544918 |
att_handle_busy |
Attachment handle is busy |
-901 |
335544919 |
bad_udf_freeit |
Bad written UDF detected: pointer returned in FREE_IT function was not allocated by ib_util_malloc |
-901 |
335544920 |
eds_provider_not_found |
External Data Source provider '@1' not found |
-901 |
335544921 |
eds_connection |
Execute statement error at @1 :@2Data source : @3 |
-901 |
335544922 |
eds_preprocess |
Execute statement preprocess SQL error |
-901 |
335544923 |
eds_stmt_expected |
Statement expected |
-901 |
335544924 |
eds_prm_name_expected |
Parameter name expected |
-901 |
335544925 |
eds_unclosed_comment |
Unclosed comment found near '@1' |
-901 |
335544926 |
eds_statement |
Execute statement error at @1 :@2Statement : @3Data source : @4 |
-901 |
335544927 |
eds_input_prm_mismatch |
Input parameters mismatch |
-901 |
335544928 |
eds_output_prm_mismatch |
Output parameters mismatch |
-901 |
335544929 |
eds_input_prm_not_set |
Input parameter '@1' have no value set |
-901 |
335544933 |
nothing_to_cancel |
nothing to cancel |
-901 |
335544934 |
ibutil_not_loaded |
ib_util library has not been loaded to deallocate memory returned by FREE_IT function |
-901 |
335544973 |
bad_epb_form |
Unrecognized events block |
-901 |
335544982 |
udf_fp_overflow |
Floating point overflow in result from UDF @1 |
-901 |
335544983 |
udf_fp_nan |
Invalid floating point value returned by UDF @1 |
-901 |
335544985 |
out_of_temp_space |
No free space found in temporary directories |
-901 |
335544986 |
eds_expl_tran_ctrl |
Explicit transaction control is not allowed |
-901 |
335544988 |
package_name |
PACKAGE @1 |
-901 |
335544989 |
cannot_make_not_null |
Cannot make field @1 of table @2 NOT NULL because there are NULLs present |
-901 |
335544990 |
feature_removed |
Feature @1 is not supported anymore |
-901 |
335544991 |
view_name |
VIEW @1 |
-901 |
335544993 |
invalid_fetch_option |
Fetch option @1 is invalid for a non-scrollable cursor |
-901 |
335544994 |
bad_fun_BLR |
Error while parsing function @1’s BLR |
-901 |
335544995 |
func_pack_not_implemented |
Cannot execute function @1 of the unimplemented package @2 |
-901 |
335544996 |
proc_pack_not_implemented |
Cannot execute procedure @1 of the unimplemented package @2 |
-901 |
335544997 |
eem_func_not_returned |
External function @1 not returned by the external engine plugin @2 |
-901 |
335544998 |
eem_proc_not_returned |
External procedure @1 not returned by the external engine plugin @2 |
-901 |
335544999 |
eem_trig_not_returned |
External trigger @1 not returned by the external engine plugin @2 |
-901 |
335545000 |
eem_bad_plugin_ver |
Incompatible plugin version @1 for external engine @2 |
-901 |
335545001 |
eem_engine_notfound |
External engine @1 not found |
-901 |
335545004 |
pman_cannot_load_plugin |
Error loading plugin @1 |
-901 |
335545005 |
pman_module_notfound |
Loadable module @1 not found |
-901 |
335545006 |
pman_entrypoint_notfound |
Standard plugin entrypoint does not exist in module @1 |
-901 |
335545007 |
pman_module_bad |
Module @1 exists but can not be loaded |
-901 |
335545008 |
pman_plugin_notfound |
Module @1 does not contain plugin @2 type @3 |
-901 |
335545010 |
unexpected_null |
Value is NULL but isNull parameter was not informed |
-901 |
335545011 |
type_notcompat_blob |
Type @1 is incompatible with BLOB |
-901 |
335545012 |
invalid_date_val |
Invalid date |
-901 |
335545013 |
invalid_time_val |
Invalid time |
-901 |
335545014 |
invalid_timestamp_val |
Invalid timestamp |
-901 |
335545015 |
invalid_index_val |
Invalid index @1 in function @2 |
-901 |
335545018 |
private_function |
Function @1 is private to package @2 |
-901 |
335545019 |
private_procedure |
Procedure @1 is private to package @2 |
-901 |
335545021 |
bad_events_handle |
invalid events id (handle) |
-901 |
335545025 |
spb_no_id |
missing service ID in spb |
-901 |
335545026 |
ee_blr_mismatch_null |
External BLR message mismatch: invalid null descriptor at field @1 |
-901 |
335545027 |
ee_blr_mismatch_length |
External BLR message mismatch: length = @1, expected @2 |
-901 |
335545031 |
libtommath_generic |
Libtommath error code @1 in function @2 |
-901 |
335545041 |
cp_process_active |
Crypt failed - already crypting database |
-901 |
335545042 |
cp_already_crypted |
Crypt failed - database is already in requested state |
-901 |
335545047 |
ee_blr_mismatch_names_count |
External BLR message mismatch: names count = @1, blr count = @2 |
-901 |
335545048 |
ee_blr_mismatch_name_not_found |
External BLR message mismatch: name @1 not found |
-901 |
335545049 |
bad_result_set |
Invalid resultset interface |
-901 |
335545059 |
badvarnum |
undefined variable number |
-901 |
335545071 |
info_unprepared_stmt |
Attempt to get information about an unprepared dynamic SQL statement. |
-901 |
335545072 |
idx_key_value |
Problematic key value is @1 |
-901 |
335545073 |
forupdate_virtualtbl |
Cannot select virtual table @1 for update WITH LOCK |
-901 |
335545074 |
forupdate_systbl |
Cannot select system table @1 for update WITH LOCK |
-901 |
335545075 |
forupdate_temptbl |
Cannot select temporary table @1 for update WITH LOCK |
-901 |
335545076 |
cant_modify_sysobj |
System @1 @2 cannot be modified |
-901 |
335545077 |
server_misconfigured |
Server misconfigured - contact administrator please |
-901 |
335545078 |
alter_role |
Deprecated backward compatibility ALTER ROLE … SET/DROP AUTO ADMIN mapping may be used only for RDB$ADMIN role |
-901 |
335545079 |
map_already_exists |
Mapping @1 already exists |
-901 |
335545080 |
map_not_exists |
Mapping @1 does not exist |
-901 |
335545081 |
map_load |
@1 failed when loading mapping cache |
-901 |
335545082 |
map_aster |
Invalid name <*> in authentication block |
-901 |
335545083 |
map_multi |
Multiple maps found for @1 |
-901 |
335545084 |
map_undefined |
Undefined mapping result - more than one different results found |
-901 |
335545088 |
map_nodb |
Global mapping is not available when database @1 is not present |
-901 |
335545089 |
map_notable |
Global mapping is not available when table RDB$MAP is not present in database @1 |
-901 |
335545090 |
miss_trusted_role |
Your attachment has no trusted role |
-901 |
335545091 |
set_invalid_role |
Role @1 is invalid or unavailable |
-901 |
335545093 |
dup_attribute |
Duplicated user attribute @1 |
-901 |
335545094 |
dyn_no_priv |
There is no privilege for this operation |
-901 |
335545095 |
dsql_cant_grant_option |
Using GRANT OPTION on @1 not allowed |
-901 |
335545097 |
crdb_load |
@1 failed when working with CREATE DATABASE grants |
-901 |
335545098 |
crdb_nodb |
CREATE DATABASE grants check is not possible when database @1 is not present |
-901 |
335545099 |
crdb_notable |
CREATE DATABASE grants check is not possible when table RDB$DB_CREATORS is not present in database @1 |
-901 |
335545102 |
savepoint_backout_err |
Error during savepoint backout - transaction invalidated |
-901 |
335545105 |
map_down |
Some database(s) were shutdown when trying to read mapping data |
-901 |
335545109 |
encrypt_error |
Page requires encryption but crypt plugin is missing |
-901 |
335545111 |
wrong_prvlg |
System privilege @1 does not exist |
-901 |
335545115 |
no_cursor |
Cannot open cursor for non-SELECT statement |
-901 |
335545127 |
cfg_stmt_timeout |
Config level timeout expired. |
-901 |
335545128 |
att_stmt_timeout |
Attachment level timeout expired. |
-901 |
335545129 |
req_stmt_timeout |
Statement level timeout expired. |
-901 |
335545139 |
decfloat_divide_by_zero |
Decimal float divide by zero. The code attempted to divide a DECFLOAT value by zero. |
-901 |
335545140 |
decfloat_inexact_result |
Decimal float inexact result. The result of an operation cannot be represented as a decimal fraction. |
-901 |
335545141 |
decfloat_invalid_operation |
Decimal float invalid operation. An indeterminant error occurred during an operation. |
-901 |
335545142 |
decfloat_overflow |
Decimal float overflow. The exponent of a result is greater than the magnitude allowed. |
-901 |
335545143 |
decfloat_underflow |
Decimal float underflow. The exponent of a result is less than the magnitude allowed. |
-901 |
335545144 |
subfunc_notdef |
Sub-function @1 has not been defined |
-901 |
335545145 |
subproc_notdef |
Sub-procedure @1 has not been defined |
-901 |
335545146 |
subfunc_signat |
Sub-function @1 has a signature mismatch with its forward declaration |
-901 |
335545147 |
subproc_signat |
Sub-procedure @1 has a signature mismatch with its forward declaration |
-901 |
335545148 |
subfunc_defvaldecl |
Default values for parameters are not allowed in definition of the previously declared sub-function @1 |
-901 |
335545149 |
subproc_defvaldecl |
Default values for parameters are not allowed in definition of the previously declared sub-procedure @1 |
-901 |
335545150 |
subfunc_not_impl |
Sub-function @1 was declared but not implemented |
-901 |
335545151 |
subproc_not_impl |
Sub-procedure @1 was declared but not implemented |
-901 |
335545152 |
sysf_invalid_hash_algorithm |
Invalid HASH algorithm @1 |
-901 |
335545153 |
expression_eval_index |
Expression evaluation error for index "@1" on table "@2" |
-901 |
335545154 |
invalid_decfloat_trap |
Invalid decfloat trap state @1 |
-901 |
335545155 |
invalid_decfloat_round |
Invalid decfloat rounding mode @1 |
-901 |
335545159 |
bad_batch_handle |
invalid batch handle |
-901 |
335545160 |
intl_char |
Bad international character in tag @1 |
-901 |
335545161 |
null_block |
Null data in parameters block with non-zero length |
-901 |
335545162 |
mixed_info |
Items working with running service and getting generic server information should not be mixed in single info block |
-901 |
335545163 |
unknown_info |
Unknown information item, code @1 |
-901 |
335545164 |
bpb_version |
Wrong version of blob parameters block @1, should be @2 |
-901 |
335545165 |
user_manager |
User management plugin is missing or failed to load |
-901 |
335545168 |
metadata_name |
Name @1 not found in system MetadataBuilder |
-901 |
335545169 |
tokens_parse |
Parse to tokens error |
-901 |
335545171 |
batch_compl_range |
Message @1 is out of range, only @2 messages in batch |
-901 |
335545172 |
batch_compl_detail |
Detailed error info for message @1 is missing in batch |
-901 |
335545175 |
big_segment |
Segment size (@1) should not exceed 65535 (64K - 1) when using segmented blob |
-901 |
335545176 |
batch_policy |
Invalid blob policy in the batch for @1() call |
-901 |
335545177 |
batch_defbpb |
Can’t change default BPB after adding any data to batch |
-901 |
335545178 |
batch_align |
Unexpected info buffer structure querying for server batch parameters |
-901 |
335545179 |
multi_segment_dup |
Duplicated segment @1 in multisegment connect block parameter |
-901 |
335545181 |
message_format |
Error parsing message format |
-901 |
335545182 |
batch_param_version |
Wrong version of batch parameters block @1, should be @2 |
-901 |
335545183 |
batch_msg_long |
Message size (@1) in batch exceeds internal buffer size (@2) |
-901 |
335545184 |
batch_open |
Batch already opened for this statement |
-901 |
335545185 |
batch_type |
Invalid type of statement used in batch |
-901 |
335545186 |
batch_param |
Statement used in batch must have parameters |
-901 |
335545187 |
batch_blobs |
There are no blobs in associated with batch statement |
-901 |
335545188 |
batch_blob_append |
appendBlobData() is used to append data to last blob but no such blob was added to the batch |
-901 |
335545189 |
batch_stream_align |
Portions of data, passed as blob stream, should have size multiple to the alignment required for blobs |
-901 |
335545190 |
batch_rpt_blob |
Repeated blob id @1 in registerBlob() |
-901 |
335545191 |
batch_blob_buf |
Blob buffer format error |
-901 |
335545192 |
batch_small_data |
Unusable (too small) data remained in @1 buffer |
-901 |
335545193 |
batch_cont_bpb |
Blob continuation should not contain BPB |
-901 |
335545194 |
batch_big_bpb |
Size of BPB (@1) greater than remaining data (@2) |
-901 |
335545195 |
batch_big_segment |
Size of segment (@1) greater than current BLOB data (@2) |
-901 |
335545196 |
batch_big_seg2 |
Size of segment (@1) greater than available data (@2) |
-901 |
335545197 |
batch_blob_id |
Unknown blob ID @1 in the batch message |
-901 |
335545198 |
batch_too_big |
Internal buffer overflow - batch too big |
-901 |
335545199 |
num_literal |
Numeric literal too long |
-901 |
335545202 |
hdr_overflow |
Header page overflow - too many clumplets on it |
-901 |
335545203 |
vld_plugins |
No matching client/server authentication plugins configured for execute statement in embedded datasource |
-901 |
335545206 |
ses_reset_err |
Cannot reset user session |
-901 |
335545207 |
ses_reset_open_trans |
There are open transactions (@1 active) |
-901 |
335545208 |
ses_reset_warn |
Session was reset with warning(s) |
-901 |
335545209 |
ses_reset_tran_rollback |
Transaction is rolled back due to session reset, all changes are lost |
-901 |
335545210 |
plugin_name |
Plugin @1: |
-901 |
335545211 |
parameter_name |
PARAMETER @1 |
-901 |
335545212 |
file_starting_page_err |
Starting page number for file @1 must be @2 or greater |
-901 |
335545213 |
invalid_timezone_offset |
Invalid time zone offset: @1 - must use format +/-hours:minutes and be between -14:00 and +14:00 |
-901 |
335545214 |
invalid_timezone_region |
Invalid time zone region: @1 |
-901 |
335545215 |
invalid_timezone_id |
Invalid time zone ID: @1 |
-901 |
335545216 |
tom_decode64len |
Wrong base64 text length @1, should be multiple of 4 |
-901 |
335545217 |
tom_strblob |
Invalid first parameter datatype - need string or blob |
-901 |
335545218 |
tom_reg |
Error registering @1 - probably bad tomcrypt library |
-901 |
335545219 |
tom_algorithm |
Unknown crypt algorithm @1 in USING clause |
-901 |
335545220 |
tom_mode_miss |
Should specify mode parameter for symmetric cipher |
-901 |
335545221 |
tom_mode_bad |
Unknown symmetric crypt mode specified |
-901 |
335545222 |
tom_no_mode |
Mode parameter makes no sense for chosen cipher |
-901 |
335545223 |
tom_iv_miss |
Should specify initialization vector (IV) for chosen cipher and/or mode |
-901 |
335545224 |
tom_no_iv |
Initialization vector (IV) makes no sense for chosen cipher and/or mode |
-901 |
335545225 |
tom_ctrtype_bad |
Invalid counter endianess @1 |
-901 |
335545226 |
tom_no_ctrtype |
Counter endianess parameter is not used in mode @1 |
-901 |
335545227 |
tom_ctr_big |
Too big counter value @1, maximum @2 can be used |
-901 |
335545228 |
tom_no_ctr |
Counter length/value parameter is not used with @1 @2 |
-901 |
335545229 |
tom_iv_length |
Invalid initialization vector (IV) length @1, need @2 |
-901 |
335545230 |
tom_error |
TomCrypt library error: @1 |
-901 |
335545231 |
tom_yarrow_start |
Starting PRNG yarrow |
-901 |
335545232 |
tom_yarrow_setup |
Setting up PRNG yarrow |
-901 |
335545233 |
tom_init_mode |
Initializing @1 mode |
-901 |
335545234 |
tom_crypt_mode |
Encrypting in @1 mode |
-901 |
335545235 |
tom_decrypt_mode |
Decrypting in @1 mode |
-901 |
335545236 |
tom_init_cip |
Initializing cipher @1 |
-901 |
335545237 |
tom_crypt_cip |
Encrypting using cipher @1 |
-901 |
335545238 |
tom_decrypt_cip |
Decrypting using cipher @1 |
-901 |
335545239 |
tom_setup_cip |
Setting initialization vector (IV) for @1 |
-901 |
335545240 |
tom_setup_chacha |
Invalid initialization vector (IV) length @1, need 8 or 12 |
-901 |
335545241 |
tom_encode |
Encoding @1 |
-901 |
335545242 |
tom_decode |
Decoding @1 |
-901 |
335545243 |
tom_rsa_import |
Importing RSA key |
-901 |
335545244 |
tom_oaep |
Invalid OAEP packet |
-901 |
335545245 |
tom_hash_bad |
Unknown hash algorithm @1 |
-901 |
335545246 |
tom_rsa_make |
Making RSA key |
-901 |
335545247 |
tom_rsa_export |
Exporting @1 RSA key |
-901 |
335545248 |
tom_rsa_sign |
RSA-signing data |
-901 |
335545249 |
tom_rsa_verify |
Verifying RSA-signed data |
-901 |
335545250 |
tom_chacha_key |
Invalid key length @1, need 16 or 32 |
-901 |
335545251 |
bad_repl_handle |
invalid replicator handle |
-901 |
335545252 |
tra_snapshot_does_not_exist |
Transaction’s base snapshot number does not exist |
-901 |
335545253 |
eds_input_prm_not_used |
Input parameter '@1' is not used in SQL query text |
-901 |
335545255 |
invalid_time_zone_bind |
Invalid time zone bind mode @1 |
-901 |
335545256 |
invalid_decfloat_bind |
Invalid decfloat bind mode @1 |
-901 |
335545257 |
odd_hex_len |
Invalid hex text length @1, should be multiple of 2 |
-901 |
335545258 |
invalid_hex_digit |
Invalid hex digit @1 at position @2 |
-901 |
335545261 |
bind_convert |
Can not convert @1 to @2 |
-901 |
335545264 |
dyn_no_create_priv |
No permission for CREATE @1 operation |
-901 |
335545265 |
suspend_without_returns |
SUSPEND could not be used without RETURNS clause in PROCEDURE or EXECUTE BLOCK |
-901 |
335545274 |
tom_key_length |
Invalid key length @1, need >@2 |
-901 |
335545275 |
inf_invalid_args |
Invalid information arguments |
-901 |
335545276 |
sysf_invalid_null_empty |
Empty or NULL parameter @1 is not accepted |
-901 |
335545277 |
bad_loctab_num |
Undefined local table number @1 |
-901 |
335545278 |
quoted_str_bad |
Invalid text <@1> after quoted string |
-901 |
335545279 |
quoted_str_miss |
Missing terminating quote <@1> in the end of quoted string |
-901 |
335545285 |
ods_upgrade_err |
ODS upgrade failed while adding new system %s |
-901 |
336068645 |
dyn_filter_not_found |
BLOB Filter @1 not found |
-901 |
336068649 |
dyn_func_not_found |
Function @1 not found |
-901 |
336068656 |
dyn_index_not_found |
Index not found |
-901 |
336068662 |
dyn_view_not_found |
View @1 not found |
-901 |
336068697 |
dyn_domain_not_found |
Domain not found |
-901 |
336068717 |
dyn_cant_modify_auto_trig |
Triggers created automatically cannot be modified |
-901 |
336068740 |
dyn_dup_table |
Table @1 already exists |
-901 |
336068748 |
dyn_proc_not_found |
Procedure @1 not found |
-901 |
336068752 |
dyn_exception_not_found |
Exception not found |
-901 |
336068754 |
dyn_proc_param_not_found |
Parameter @1 in procedure @2 not found |
-901 |
336068755 |
dyn_trig_not_found |
Trigger @1 not found |
-901 |
336068759 |
dyn_charset_not_found |
Character set @1 not found |
-901 |
336068760 |
dyn_collation_not_found |
Collation @1 not found |
-901 |
336068763 |
dyn_role_not_found |
Role @1 not found |
-901 |
336068767 |
dyn_name_longer |
Name longer than database column size |
-901 |
336068784 |
dyn_column_does_not_exist |
column @1 does not exist in table/view @2 |
-901 |
336068796 |
dyn_role_does_not_exist |
SQL role @1 does not exist |
-901 |
336068797 |
dyn_no_grant_admin_opt |
user @1 has no grant admin option on SQL role @2 |
-901 |
336068798 |
dyn_user_not_role_member |
user @1 is not a member of SQL role @2 |
-901 |
336068799 |
dyn_delete_role_failed |
@1 is not the owner of SQL role @2 |
-901 |
336068800 |
dyn_grant_role_to_user |
@1 is a SQL role and not a user |
-901 |
336068801 |
dyn_inv_sql_role_name |
user name @1 could not be used for SQL role |
-901 |
336068802 |
dyn_dup_sql_role |
SQL role @1 already exists |
-901 |
336068803 |
dyn_kywd_spec_for_role |
keyword @1 can not be used as a SQL role name |
-901 |
336068804 |
dyn_roles_not_supported |
SQL roles are not supported in on older versions of the database. A backup and restore of the database is required. |
-901 |
336068820 |
dyn_zero_len_id |
Zero length identifiers are not allowed |
-901 |
336068822 |
dyn_gen_not_found |
Sequence @1 not found |
-901 |
336068840 |
dyn_wrong_gtt_scope |
@1 cannot reference @2 |
-901 |
336068843 |
dyn_coll_used_table |
Collation @1 is used in table @2 (field name @3) and cannot be dropped |
-901 |
336068844 |
dyn_coll_used_domain |
Collation @1 is used in domain @2 and cannot be dropped |
-901 |
336068846 |
dyn_cannot_del_def_coll |
Cannot delete default collation of CHARACTER SET @1 |
-901 |
336068849 |
dyn_table_not_found |
Table @1 not found |
-901 |
336068851 |
dyn_coll_used_procedure |
Collation @1 is used in procedure @2 (parameter name @3) and cannot be dropped |
-901 |
336068856 |
dyn_ods_not_supp_feature |
Feature '@1' is not supported in ODS @2.@3 |
-901 |
336068858 |
dyn_no_empty_pw |
Password should not be empty string |
-901 |
336068859 |
dyn_dup_index |
Index @1 already exists |
-901 |
336068864 |
dyn_package_not_found |
Package @1 not found |
-901 |
336068865 |
dyn_schema_not_found |
Schema @1 not found |
-901 |
336068871 |
dyn_funcnotdef_package |
Function @1 has not been defined on the package body @2 |
-901 |
336068872 |
dyn_procnotdef_package |
Procedure @1 has not been defined on the package body @2 |
-901 |
336068873 |
dyn_funcsignat_package |
Function @1 has a signature mismatch on package body @2 |
-901 |
336068874 |
dyn_procsignat_package |
Procedure @1 has a signature mismatch on package body @2 |
-901 |
336068875 |
dyn_defvaldecl_package_proc |
Default values for parameters are not allowed in the definition of a previously declared packaged procedure @1.@2 |
-901 |
336068877 |
dyn_package_body_exists |
Package body @1 already exists |
-901 |
336068879 |
dyn_newfc_oldsyntax |
Cannot alter new style function @1 with ALTER EXTERNAL FUNCTION. Use ALTER FUNCTION instead. |
-901 |
336068886 |
dyn_func_param_not_found |
Parameter @1 in function @2 not found |
-901 |
336068887 |
dyn_routine_param_not_found |
Parameter @1 of routine @2 not found |
-901 |
336068888 |
dyn_routine_param_ambiguous |
Parameter @1 of routine @2 is ambiguous (found in both procedures and functions). Use a specifier keyword. |
-901 |
336068889 |
dyn_coll_used_function |
Collation @1 is used in function @2 (parameter name @3) and cannot be dropped |
-901 |
336068890 |
dyn_domain_used_function |
Domain @1 is used in function @2 (parameter name @3) and cannot be dropped |
-901 |
336068891 |
dyn_alter_user_no_clause |
ALTER USER requires at least one clause to be specified |
-901 |
336068894 |
dyn_duplicate_package_item |
Duplicate @1 @2 |
-901 |
336068895 |
dyn_cant_modify_sysobj |
System @1 @2 cannot be modified |
-901 |
336068896 |
dyn_cant_use_zero_increment |
INCREMENT BY 0 is an illegal option for sequence @1 |
-901 |
336068897 |
dyn_cant_use_in_foreignkey |
Can’t use @1 in FOREIGN KEY constraint |
-901 |
336068898 |
dyn_defvaldecl_package_func |
Default values for parameters are not allowed in the definition of a previously declared packaged function @1.@2 |
-901 |
336068900 |
dyn_cyclic_role |
role @1 can not be granted to role @2 |
-901 |
336068904 |
dyn_cant_use_zero_inc_ident |
INCREMENT BY 0 is an illegal option for identity column @1 of table @2 |
-901 |
336068907 |
dyn_no_ddl_grant_opt_priv |
no @1 privilege with grant option on DDL @2 |
-901 |
336068908 |
dyn_no_grant_opt_priv |
no @1 privilege with grant option on object @2 |
-901 |
336068909 |
dyn_func_not_exist |
Function @1 does not exist |
-901 |
336068910 |
dyn_proc_not_exist |
Procedure @1 does not exist |
-901 |
336068911 |
dyn_pack_not_exist |
Package @1 does not exist |
-901 |
336068912 |
dyn_trig_not_exist |
Trigger @1 does not exist |
-901 |
336068913 |
dyn_view_not_exist |
View @1 does not exist |
-901 |
336068914 |
dyn_rel_not_exist |
Table @1 does not exist |
-901 |
336068915 |
dyn_exc_not_exist |
Exception @1 does not exist |
-901 |
336068916 |
dyn_gen_not_exist |
Generator/Sequence @1 does not exist |
-901 |
336068917 |
dyn_fld_not_exist |
Field @1 of table @2 does not exist |
-901 |
336397211 |
dsql_too_many_values |
Too many values (more than @1) in member list to match against |
-901 |
336397236 |
dsql_unsupp_feature_dialect |
feature is not supported in dialect @1 |
-901 |
336397239 |
dsql_unsupported_in_auto_trans |
@1 is not supported inside IN AUTONOMOUS TRANSACTION block |
-901 |
336397258 |
dsql_alter_charset_failed |
ALTER CHARACTER SET @1 failed |
-901 |
336397259 |
dsql_comment_on_failed |
COMMENT ON @1 failed |
-901 |
336397260 |
dsql_create_func_failed |
CREATE FUNCTION @1 failed |
-901 |
336397261 |
dsql_alter_func_failed |
ALTER FUNCTION @1 failed |
-901 |
336397262 |
dsql_create_alter_func_failed |
CREATE OR ALTER FUNCTION @1 failed |
-901 |
336397263 |
dsql_drop_func_failed |
DROP FUNCTION @1 failed |
-901 |
336397264 |
dsql_recreate_func_failed |
RECREATE FUNCTION @1 failed |
-901 |
336397265 |
dsql_create_proc_failed |
CREATE PROCEDURE @1 failed |
-901 |
336397266 |
dsql_alter_proc_failed |
ALTER PROCEDURE @1 failed |
-901 |
336397267 |
dsql_create_alter_proc_failed |
CREATE OR ALTER PROCEDURE @1 failed |
-901 |
336397268 |
dsql_drop_proc_failed |
DROP PROCEDURE @1 failed |
-901 |
336397269 |
dsql_recreate_proc_failed |
RECREATE PROCEDURE @1 failed |
-901 |
336397270 |
dsql_create_trigger_failed |
CREATE TRIGGER @1 failed |
-901 |
336397271 |
dsql_alter_trigger_failed |
ALTER TRIGGER @1 failed |
-901 |
336397272 |
dsql_create_alter_trigger_failed |
CREATE OR ALTER TRIGGER @1 failed |
-901 |
336397273 |
dsql_drop_trigger_failed |
DROP TRIGGER @1 failed |
-901 |
336397274 |
dsql_recreate_trigger_failed |
RECREATE TRIGGER @1 failed |
-901 |
336397275 |
dsql_create_collation_failed |
CREATE COLLATION @1 failed |
-901 |
336397276 |
dsql_drop_collation_failed |
DROP COLLATION @1 failed |
-901 |
336397277 |
dsql_create_domain_failed |
CREATE DOMAIN @1 failed |
-901 |
336397278 |
dsql_alter_domain_failed |
ALTER DOMAIN @1 failed |
-901 |
336397279 |
dsql_drop_domain_failed |
DROP DOMAIN @1 failed |
-901 |
336397280 |
dsql_create_except_failed |
CREATE EXCEPTION @1 failed |
-901 |
336397281 |
dsql_alter_except_failed |
ALTER EXCEPTION @1 failed |
-901 |
336397282 |
dsql_create_alter_except_failed |
CREATE OR ALTER EXCEPTION @1 failed |
-901 |
336397283 |
dsql_recreate_except_failed |
RECREATE EXCEPTION @1 failed |
-901 |
336397284 |
dsql_drop_except_failed |
DROP EXCEPTION @1 failed |
-901 |
336397285 |
dsql_create_sequence_failed |
CREATE SEQUENCE @1 failed |
-901 |
336397286 |
dsql_create_table_failed |
CREATE TABLE @1 failed |
-901 |
336397287 |
dsql_alter_table_failed |
ALTER TABLE @1 failed |
-901 |
336397288 |
dsql_drop_table_failed |
DROP TABLE @1 failed |
-901 |
336397289 |
dsql_recreate_table_failed |
RECREATE TABLE @1 failed |
-901 |
336397290 |
dsql_create_pack_failed |
CREATE PACKAGE @1 failed |
-901 |
336397291 |
dsql_alter_pack_failed |
ALTER PACKAGE @1 failed |
-901 |
336397292 |
dsql_create_alter_pack_failed |
CREATE OR ALTER PACKAGE @1 failed |
-901 |
336397293 |
dsql_drop_pack_failed |
DROP PACKAGE @1 failed |
-901 |
336397294 |
dsql_recreate_pack_failed |
RECREATE PACKAGE @1 failed |
-901 |
336397295 |
dsql_create_pack_body_failed |
CREATE PACKAGE BODY @1 failed |
-901 |
336397296 |
dsql_drop_pack_body_failed |
DROP PACKAGE BODY @1 failed |
-901 |
336397297 |
dsql_recreate_pack_body_failed |
RECREATE PACKAGE BODY @1 failed |
-901 |
336397298 |
dsql_create_view_failed |
CREATE VIEW @1 failed |
-901 |
336397299 |
dsql_alter_view_failed |
ALTER VIEW @1 failed |
-901 |
336397300 |
dsql_create_alter_view_failed |
CREATE OR ALTER VIEW @1 failed |
-901 |
336397301 |
dsql_recreate_view_failed |
RECREATE VIEW @1 failed |
-901 |
336397302 |
dsql_drop_view_failed |
DROP VIEW @1 failed |
-901 |
336397303 |
dsql_drop_sequence_failed |
DROP SEQUENCE @1 failed |
-901 |
336397304 |
dsql_recreate_sequence_failed |
RECREATE SEQUENCE @1 failed |
-901 |
336397305 |
dsql_drop_index_failed |
DROP INDEX @1 failed |
-901 |
336397306 |
dsql_drop_filter_failed |
DROP FILTER @1 failed |
-901 |
336397307 |
dsql_drop_shadow_failed |
DROP SHADOW @1 failed |
-901 |
336397308 |
dsql_drop_role_failed |
DROP ROLE @1 failed |
-901 |
336397309 |
dsql_drop_user_failed |
DROP USER @1 failed |
-901 |
336397310 |
dsql_create_role_failed |
CREATE ROLE @1 failed |
-901 |
336397311 |
dsql_alter_role_failed |
ALTER ROLE @1 failed |
-901 |
336397312 |
dsql_alter_index_failed |
ALTER INDEX @1 failed |
-901 |
336397313 |
dsql_alter_database_failed |
ALTER DATABASE failed |
-901 |
336397314 |
dsql_create_shadow_failed |
CREATE SHADOW @1 failed |
-901 |
336397315 |
dsql_create_filter_failed |
DECLARE FILTER @1 failed |
-901 |
336397316 |
dsql_create_index_failed |
CREATE INDEX @1 failed |
-901 |
336397317 |
dsql_create_user_failed |
CREATE USER @1 failed |
-901 |
336397318 |
dsql_alter_user_failed |
ALTER USER @1 failed |
-901 |
336397319 |
dsql_grant_failed |
GRANT failed |
-901 |
336397320 |
dsql_revoke_failed |
REVOKE failed |
-901 |
336397322 |
dsql_mapping_failed |
@2 MAPPING @1 failed |
-901 |
336397323 |
dsql_alter_sequence_failed |
ALTER SEQUENCE @1 failed |
-901 |
336397324 |
dsql_create_generator_failed |
CREATE GENERATOR @1 failed |
-901 |
336397325 |
dsql_set_generator_failed |
SET GENERATOR @1 failed |
-901 |
336397330 |
dsql_max_exception_arguments |
Number of arguments (@1) exceeds the maximum (@2) number of EXCEPTION USING arguments |
-901 |
336397331 |
dsql_string_byte_length |
String literal with @1 bytes exceeds the maximum length of @2 bytes |
-901 |
336397332 |
dsql_string_char_length |
String literal with @1 characters exceeds the maximum length of @2 characters for the @3 character set |
-901 |
336397333 |
dsql_max_nesting |
Too many BEGIN…END nesting. Maximum level is @1 |
-901 |
336397334 |
dsql_recreate_user_failed |
RECREATE USER @1 failed |
-902 |
335544333 |
bug_check |
internal Firebird consistency check (@1) |
-902 |
335544335 |
db_corrupt |
database file appears corrupt (@1) |
-902 |
335544344 |
io_error |
I/O error during "@1" operation for file "@2" |
-902 |
335544346 |
metadata_corrupt |
corrupt system table |
-902 |
335544373 |
sys_request |
operating system directive @1 failed |
-902 |
335544384 |
badblk |
internal error |
-902 |
335544385 |
invpoolcl |
internal error |
-902 |
335544387 |
relbadblk |
internal error |
-902 |
335544388 |
blktoobig |
block size exceeds implementation restriction |
-902 |
335544394 |
badodsver |
incompatible version of on-disk structure |
-902 |
335544397 |
dirtypage |
internal error |
-902 |
335544398 |
waifortra |
internal error |
-902 |
335544399 |
doubleloc |
internal error |
-902 |
335544400 |
nodnotfnd |
internal error |
-902 |
335544401 |
dupnodfnd |
internal error |
-902 |
335544402 |
locnotmar |
internal error |
-902 |
335544404 |
corrupt |
database corrupted |
-902 |
335544405 |
badpage |
checksum error on database page @1 |
-902 |
335544406 |
badindex |
index is broken |
-902 |
335544409 |
trareqmis |
transaction—request mismatch (synchronization error) |
-902 |
335544410 |
badhndcnt |
bad handle count |
-902 |
335544411 |
wrotpbver |
wrong version of transaction parameter block |
-902 |
335544412 |
wroblrver |
unsupported BLR version (expected @1, encountered @2) |
-902 |
335544413 |
wrodpbver |
wrong version of database parameter block |
-902 |
335544415 |
badrelation |
database corrupted |
-902 |
335544416 |
nodetach |
internal error |
-902 |
335544417 |
notremote |
internal error |
-902 |
335544422 |
dbfile |
internal error |
-902 |
335544423 |
orphan |
internal error |
-902 |
335544432 |
lockmanerr |
lock manager error |
-902 |
335544436 |
sqlerr |
SQL error code = @1 |
-902 |
335544448 |
bad_sec_info |
|
-902 |
335544449 |
invalid_sec_info |
|
-902 |
335544470 |
buf_invalid |
cache buffer for page @1 invalid |
-902 |
335544471 |
indexnotdefined |
there is no index in table @1 with id @2 |
-902 |
335544472 |
login |
Your user name and password are not defined. Ask your database administrator to set up a Firebird login. |
-902 |
335544478 |
jrn_enable |
enable journal for database before starting online dump |
-902 |
335544479 |
old_failure |
online dump failure. Retry dump |
-902 |
335544480 |
old_in_progress |
an online dump is already in progress |
-902 |
335544481 |
old_no_space |
no more disk/tape space. Cannot continue online dump |
-902 |
335544482 |
no_wal_no_jrn |
journaling allowed only if database has Write-ahead Log |
-902 |
335544483 |
num_old_files |
maximum number of online dump files that can be specified is 16 |
-902 |
335544484 |
wal_file_open |
error in opening Write-ahead Log file during recovery |
-902 |
335544486 |
wal_failure |
Write-ahead log subsystem failure |
-902 |
335544505 |
no_archive |
must specify archive file when enabling long term journal for databases with round-robin log files |
-902 |
335544506 |
shutinprog |
database @1 shutdown in progress |
-902 |
335544520 |
jrn_present |
long-term journaling already enabled |
-902 |
335544528 |
shutdown |
database @1 shutdown |
-902 |
335544557 |
shutfail |
database shutdown unsuccessful |
-902 |
335544564 |
no_jrn |
long-term journaling not enabled |
-902 |
335544569 |
dsql_error |
Dynamic SQL Error |
-902 |
335544653 |
psw_attach |
cannot attach to password database |
-902 |
335544654 |
psw_start_trans |
cannot start transaction for password database |
-902 |
335544717 |
err_stack_limit |
stack size insufficent to execute current request |
-902 |
335544721 |
network_error |
Unable to complete network request to host "@1". |
-902 |
335544722 |
net_connect_err |
Failed to establish a connection. |
-902 |
335544723 |
net_connect_listen_err |
Error while listening for an incoming connection. |
-902 |
335544724 |
net_event_connect_err |
Failed to establish a secondary connection for event processing. |
-902 |
335544725 |
net_event_listen_err |
Error while listening for an incoming event connection request. |
-902 |
335544726 |
net_read_err |
Error reading data from the connection. |
-902 |
335544727 |
net_write_err |
Error writing data to the connection. |
-902 |
335544732 |
unsupported_network_drive |
Access to databases on file servers is not supported. |
-902 |
335544733 |
io_create_err |
Error while trying to create file |
-902 |
335544734 |
io_open_err |
Error while trying to open file |
-902 |
335544735 |
io_close_err |
Error while trying to close file |
-902 |
335544736 |
io_read_err |
Error while trying to read from file |
-902 |
335544737 |
io_write_err |
Error while trying to write to file |
-902 |
335544738 |
io_delete_err |
Error while trying to delete file |
-902 |
335544739 |
io_access_err |
Error while trying to access file |
-902 |
335544745 |
login_same_as_role_name |
Your login @1 is same as one of the SQL role name. Ask your database administrator to set up a valid Firebird login. |
-902 |
335544791 |
file_in_use |
The file @1 is currently in use by another process. Try again later. |
-902 |
335544795 |
unexp_spb_form |
unexpected item in service parameter block, expected @1 |
-902 |
335544809 |
extern_func_dir_error |
Function @1 is in @2, which is not in a permitted directory for external functions. |
-902 |
335544819 |
io_32bit_exceeded_err |
File exceeded maximum size of 2GB. Add another database file or use a 64 bit I/O version of Firebird. |
-902 |
335544831 |
conf_access_denied |
Use of @1 at location @2 is not allowed by server configuration |
-902 |
335544834 |
cursor_not_open |
Cursor is not open |
-902 |
335544841 |
cursor_already_open |
Cursor is already open |
-902 |
335544856 |
att_shutdown |
connection shutdown |
-902 |
335544882 |
long_login |
Login name too long (@1 characters, maximum allowed @2) |
-902 |
335544936 |
psw_db_error |
Security database error |
-902 |
335544970 |
missing_required_spb |
Missing required item @1 in service parameter block |
-902 |
335544971 |
net_server_shutdown |
@1 server is shutdown |
-902 |
335544974 |
no_threads |
Could not start first worker thread - shutdown server |
-902 |
335544975 |
net_event_connect_timeout |
Timeout occurred while waiting for a secondary connection for event processing |
-902 |
335544984 |
instance_conflict |
Shared memory area is probably already created by another engine instance in another Windows session |
-902 |
335544987 |
no_trusted_spb |
Use of TRUSTED switches in spb_command_line is prohibited |
-902 |
335545029 |
missing_data_structures |
Install incomplete. To complete security database initialization please CREATE USER. For details read doc/README.security_database.txt. |
-902 |
335545030 |
protect_sys_tab |
@1 operation is not allowed for system table @2 |
-902 |
335545032 |
wroblrver2 |
unsupported BLR version (expected between @1 and @2, encountered @3) |
-902 |
335545043 |
decrypt_error |
Missing crypt plugin, but page appears encrypted |
-902 |
335545044 |
no_providers |
No providers loaded |
-902 |
335545053 |
miss_config |
Missing configuration file: @1 |
-902 |
335545054 |
conf_line |
@1: illegal line <@2> |
-902 |
335545055 |
conf_include |
Invalid include operator in @1 for <@2> |
-902 |
335545056 |
include_depth |
Include depth too big |
-902 |
335545057 |
include_miss |
File to include not found |
-902 |
335545060 |
sec_context |
Missing security context for @1 |
-902 |
335545061 |
multi_segment |
Missing segment @1 in multisegment connect block parameter |
-902 |
335545062 |
login_changed |
Different logins in connect and attach packets - client library error |
-902 |
335545063 |
auth_handshake_limit |
Exceeded exchange limit during authentication handshake |
-902 |
335545064 |
wirecrypt_incompatible |
Incompatible wire encryption levels requested on client and server |
-902 |
335545065 |
miss_wirecrypt |
Client attempted to attach unencrypted but wire encryption is required |
-902 |
335545066 |
wirecrypt_key |
Client attempted to start wire encryption using unknown key @1 |
-902 |
335545067 |
wirecrypt_plugin |
Client attempted to start wire encryption using unsupported plugin @1 |
-902 |
335545068 |
secdb_name |
Error getting security database name from configuration file |
-902 |
335545069 |
auth_data |
Client authentication plugin is missing required data from server |
-902 |
335545070 |
auth_datalength |
Client authentication plugin expected @2 bytes of @3 from server, got @1 |
-902 |
335545106 |
login_error |
Error occurred during login, please check server firebird.log for details |
-902 |
335545107 |
already_opened |
Database already opened with engine instance, incompatible with current |
-902 |
335545108 |
bad_crypt_key |
Invalid crypt key @1 |
-902 |
335545112 |
miss_prvlg |
System privilege @1 is missing |
-902 |
335545113 |
crypt_checksum |
Invalid or missing checksum of encrypted database |
-902 |
335545114 |
not_dba |
You must have SYSDBA rights at this server |
-902 |
335545126 |
sql_too_long |
SQL statement is too long. Maximum size is @1 bytes. |
-902 |
335545130 |
att_shut_killed |
Killed by database administrator. |
-902 |
335545131 |
att_shut_idle |
Idle timeout expired. |
-902 |
335545132 |
att_shut_db_down |
Database is shutdown. |
-902 |
335545133 |
att_shut_engine |
Engine is shutdown. |
-902 |
335545134 |
overriding_without_identity |
OVERRIDING clause can be used only when an identity column is present in the INSERT’s field list for table/view @1 |
-902 |
335545135 |
overriding_system_invalid |
OVERRIDING SYSTEM VALUE can be used only for identity column defined as 'GENERATED ALWAYS' in INSERT for table/view @1 |
-902 |
335545136 |
overriding_user_invalid |
OVERRIDING USER VALUE can be used only for identity column defined as 'GENERATED BY DEFAULT' in INSERT for table/view @1 |
-902 |
335545137 |
overriding_system_missing |
OVERRIDING SYSTEM VALUE should be used to override the value of an identity column defined as 'GENERATED ALWAYS' in table/view @1 |
-902 |
335545166 |
icu_entrypoint |
Missing entrypoint @1 in ICU library |
-902 |
335545167 |
icu_library |
Could not find acceptable ICU library |
-902 |
335545170 |
iconv_open |
Error opening international conversion descriptor from @1 to @2 |
-902 |
335545173 |
deflate_init |
Compression stream init error @1 |
-902 |
335545174 |
inflate_init |
Decompression stream init error @1 |
-902 |
335545180 |
non_plugin_protocol |
Plugin not supported by network protocol |
-902 |
335545200 |
map_event |
Error using events in mapping shared memory: @1 |
-902 |
335545201 |
map_overflow |
Global mapping memory overflow |
-902 |
335545204 |
db_crypt_key |
Missing database encryption key for your attachment |
-902 |
335545259 |
bind_err |
Error processing isc_dpb_set_bind clumplet "@1" |
-902 |
335545260 |
bind_statement |
The following statement failed: @1 |
-902 |
335545270 |
wrong_page |
RDB$PAGES written by non-system transaction, DB appears to be damaged |
-902 |
335545271 |
repl_error |
Replication error |
-902 |
335545272 |
ses_reset_failed |
Reset of user session failed. Connection is shut down. |
-902 |
335545273 |
block_size |
File size is less than expected |
-902 |
335545280 |
wrong_shmem_ver |
@1: inconsistent shared memory type/version; found @2, expected @3 |
-902 |
335545281 |
wrong_shmem_bitness |
@1-bit engine can’t open database already opened by @2-bit engine |
-902 |
335545287 |
idx_expr_not_found |
Definition of index expression is not found for index @1 |
-902 |
335545288 |
idx_cond_not_found |
Definition of index condition is not found for index @1 |
-904 |
335544324 |
bad_db_handle |
invalid database handle (no active connection) |
-904 |
335544375 |
unavailable |
unavailable database |
-904 |
335544381 |
imp_exc |
Implementation limit exceeded |
-904 |
335544386 |
nopoolids |
too many requests |
-904 |
335544389 |
bufexh |
buffer exhausted |
-904 |
335544391 |
bufinuse |
buffer in use |
-904 |
335544393 |
reqinuse |
request in use |
-904 |
335544424 |
no_lock_mgr |
no lock manager available |
-904 |
335544430 |
virmemexh |
unable to allocate memory from operating system |
-904 |
335544451 |
update_conflict |
update conflicts with concurrent update |
-904 |
335544453 |
obj_in_use |
object @1 is in use |
-904 |
335544455 |
shadow_accessed |
cannot attach active shadow file |
-904 |
335544460 |
shadow_missing |
a file in manual shadow @1 is unavailable |
-904 |
335544661 |
index_root_page_full |
cannot add index, index root page is full. |
-904 |
335544676 |
sort_mem_err |
sort error: not enough memory |
-904 |
335544683 |
req_depth_exceeded |
request depth exceeded. (Recursive definition?) |
-904 |
335544758 |
sort_rec_size_err |
sort record size of @1 bytes is too big |
-904 |
335544761 |
too_many_handles |
too many open handles to database |
-904 |
335544762 |
optimizer_blk_exc |
size of optimizer block exceeded |
-904 |
335544792 |
service_att_err |
Cannot attach to services manager |
-904 |
335544799 |
svc_name_missing |
The service name was not specified. |
-904 |
335544813 |
optimizer_between_err |
Unsupported field type specified in BETWEEN predicate. |
-904 |
335544827 |
exec_sql_invalid_arg |
Invalid argument in EXECUTE STATEMENT - cannot convert to string |
-904 |
335544828 |
exec_sql_invalid_req |
Wrong request type in EXECUTE STATEMENT '@1' |
-904 |
335544829 |
exec_sql_invalid_var |
Variable type (position @1) in EXECUTE STATEMENT '@2' INTO does not match returned column type |
-904 |
335544830 |
exec_sql_max_call_exceeded |
Too many recursion levels of EXECUTE STATEMENT |
-904 |
335544832 |
wrong_backup_state |
Cannot change difference file name while database is in backup mode |
-904 |
335544833 |
wal_backup_err |
Physical backup is not allowed while Write-Ahead Log is in use |
-904 |
335544852 |
partner_idx_incompat_type |
partner index segment no @1 has incompatible data type |
-904 |
335544857 |
blobtoobig |
Maximum BLOB size exceeded |
-904 |
335544862 |
record_lock_not_supp |
Stream does not support record locking |
-904 |
335544863 |
partner_idx_not_found |
Cannot create foreign key constraint @1. Partner index does not exist or is inactive. |
-904 |
335544864 |
tra_num_exc |
Transactions count exceeded. Perform backup and restore to make database operable again |
-904 |
335544865 |
field_disappeared |
Column has been unexpectedly deleted |
-904 |
335544878 |
concurrent_transaction |
concurrent transaction number is @1 |
-904 |
335544935 |
circular_computed |
Cannot have circular dependencies with computed fields |
-904 |
335544992 |
lock_dir_access |
Can not access lock files directory @1 |
-904 |
335545020 |
request_outdated |
Request can’t access new records in relation @1 and should be recompiled |
-904 |
335545096 |
read_conflict |
read conflicts with concurrent update |
-904 |
335545110 |
max_idx_depth |
Maximum index depth (@1 levels) is reached |
-906 |
335544452 |
unlicensed |
product @1 is not licensed |
-906 |
335544744 |
max_att_exceeded |
Maximum user count exceeded. Contact your database administrator. |
-909 |
335544667 |
drdb_completed_with_errs |
drop database completed with errors |
-911 |
335544459 |
rec_in_limbo |
record from transaction @1 is stuck in limbo |
-913 |
335544336 |
deadlock |
deadlock |
-922 |
335544323 |
bad_db_format |
file @1 is not a valid database |
-923 |
335544421 |
connect_reject |
connection rejected by remote interface |
-923 |
335544461 |
cant_validate |
secondary server attachments cannot validate databases |
-923 |
335544462 |
cant_start_journal |
secondary server attachments cannot start journaling |
-923 |
335544464 |
cant_start_logging |
secondary server attachments cannot start logging |
-924 |
335544325 |
bad_dpb_content |
bad parameters on attach or create database |
-924 |
335544433 |
journerr |
communication error with journal "@1" |
-924 |
335544441 |
bad_detach |
database detach completed with errors |
-924 |
335544648 |
conn_lost |
Connection lost to pipe server |
-924 |
335544972 |
bad_conn_str |
Invalid connection string |
-924 |
335545085 |
baddpb_damaged_mode |
Incompatible mode of attachment to damaged database |
-924 |
335545086 |
baddpb_buffers_range |
Attempt to set in database number of buffers which is out of acceptable range [@1:@2] |
-924 |
335545087 |
baddpb_temp_buffers |
Attempt to temporarily set number of buffers less than @1 |
-924 |
335545286 |
bad_par_workers |
Wrong parallel workers value @1, valid range are from 1 to @2 |
-926 |
335544447 |
no_rollback |
no rollback performed |
-999 |
335544689 |
ib_error |
Firebird error |