Nbackup features — an overview

With nbackup, you can perform two different kinds of tasks:

Making and restoring of both full and incremental backups.An incremental backup only contains the mutations since some specific previous backup.This task can be performed only with Firebird command-line tool nbackup.
Locking the main database file, so you can subsequently back it up yourself with copying or backup tools of your own choice.In this mode, nbackup doesn’t back up anything;it just creates the conditions under which you can safely make the backup yourself.There’s a provision for restoring here, too.Locking is necessary to make valid backups of Firebird databases inside virtual machines: without locking a database before backup of VM, the database file in the VM backup could be inconsistent.See [nbackup-lock-virtual-machine].

Both modes can operate on an active database, without hindering connected users.The backup created will always reflect the state of the database at the beginning of the operation.Furthermore, only SYSDBA and the database owner (and sometimes OS admins) can make a backup, but every user can restore a backup to a new database.In these respects nbackup doesn’t differ from gbak.

Advantages of nbackup

Both modes: high speed (as high as hardware and OS will allow), because nbackup doesn’t look at the actual data.In backup mode the contents are written more or less blindly to the backup file.
Backup/restore mode: time and disk space savings, because you don’t need to make a full backup every time.This can make a huge difference with databases in the gigabyte range.
Lock/unlock mode: total freedom in your choice of backup, copy, and/or compression tools.

docnext count = 29

Limitations of nbackup

Nbackup will not sweep and compact your database the way gbak does (in a case of backup with subsequent restore).
You can’t change the database owner with an nbackup backup/restore cycle, like you can with gbak.
Nbackup can’t make transportable backups.A nbackup backup cannot be restored on an incompatible platform or under another server version.
At this moment, nbackup should not be used on multi-file databases.
Nbackup itself can only back up local databases.However, in Firebird 2.5 and above its backup and restore tasks can also be performed remotely through the Services Manager.
Except when the Services Manager is used (in Firebird 2.5+) backing up with nbackup requires direct access to the database file.With gbak this is not the case.

Functions and parameters

The following table gives an overview of nbackup’s parameters.If the field “Added” is empty, the parameter has existed since nbackup’s introduction in Firebird 2.0.

Note

The long form in the “Option” column was introduced in Firebird 3.0.The long form will generally work in Firebird 2.5 and earlier, because the nbackup tool in Firebird 2.5 and earlier seems to ignore any characters after a matched short parameter.We recommend using the short form instead on Firebird 2.5 and earlier.

The “Short” variant takes the same arguments as the long form, but these are left out of the table for brevity.

Table 1. Nbackup parameters
Option	Short	Function	Added
`-BACKUP {level \| guid} database [filename]`	`-B`	Make level-level backup of database to file, since 4.0 guid selects the most recent backup of a read-only standby database, and backs up all changes since that backup
`-RESTORE database [filename …]`	`-R`	Restore database from backup file(s)
`-LOCK database`	`-L`	Lock database
`-UNLOCK database`	`-UN`	Unlock locked database	3.0
`-N database`		Unlock locked database (deprecated since 3.0, use `-UNLOCK`)
`-FIXUP database`	`-F`	Unlock user-restored database
`-SIZE`	`-S`	Give size in database pages (with `-LOCK`)	2.1
`-NODBTRIGGERS`	`-NOD`	Suppress database triggers (with `-BACKUP`, `-LOCK`, `-UNLOCK`)	3.0
`-T`		Suppress database triggers (deprecated since 3.0, use `-NODBTRIGGERS`)	2.1
`-DIRECT {ON \| OFF}`	`-D`	Direct I/O on/off (with `-BACKUP`)	2.1.4
`-INPLACE`	`-I`	Restore incremental backup(s) to existing database (can corrupt database when used incorrectly);requires `-RESTORE`	4.0
`-DECOMPRESS command`	`-DE`	Command to extract archives during restore;requires `-RESTORE`	3.0
`-SEQUENCE`	`-SEQ`	Preserve original replication sequence;requires `-RESTORE`	4.0
`-USER username`	`-U`	Supply username (with `-BACKUP`, `-LOCK`, `-UNLOCK`)
`-ROLE role`	`-RO`	SQL role name (with `-BACKUP`, `-LOCK`, `-UNLOCK`)	3.0
`-PASSWORD password`	`-P`	Supply password (with `-BACKUP`, `-LOCK`, `-UNLOCK`)
`-FETCH_PASSWORD filename`	`-FE`	Fetch password from file (with `-BACKUP`, `-LOCK`, `-UNLOCK`)	2.5
`-Z`		Version info (by itself or with `-BACKUP`, `-RESTORE`, `-LOCK`, `-UNLOCK`, `-FIXUP`)	2.5
`-?`		Help (switches off all other parameters)	2.5

Depending on the chosen main function (-BACKUP, -RESTORE, -LOCK, -UNLOCK or -FIXUP), nbackup may require different types of access to the database: a Firebird server connection, direct file access, or both.The following table gives the details:

Table 2. Access required
Option	Function	Access
`-BACKUP`	Backup	server + file
`-RESTORE`	Restore	file
`-LOCK`	Lock	server
`-UNLOCK`	Unlock (undo `-L`)	server
`-N`	Unlock (undo `-L`)	server
`-FIXUP`	Unlock after user restore	file

Where server access is required (with -BACKUP, -LOCK and -UNLOCK), the user must either provide a Firebird username and password (with -USER and -PASSWORD/-FETCH_PASSWORD or through the environment variables ISC_USER and ISC_PASSWORD), or be admitted by the server on other grounds (e.g. as root under Posix or by trusted authentication under Windows).

Where filesystem access is required (with -BACKUP, -RESTORE and -FIXUP), the user must have sufficient read and/or write privileges to the database file.

Where filesystem access is required exclusively (with -RESTORE and -FIXUP), the user need not have a Firebird login and a running Firebird server need not be present.

Please notice: The above table and text concern access to the database.Access to the backup file is — obviously — always on the filesystem level.

Making and restoring backups

To begin with: nbackup.exe is located in the bin subdirectory of your Firebird folder.Typical locations are e.g. C:\Program Files\Firebird\Firebird_3_0 or C:\Program Files\Firebird\Firebird_2_0\bin (Windows) or /opt/firebird/bin (Linux).Just like most of the tools that come with Firebird, nbackup has no graphical interface;you launch it from the command prompt or call it from within a batch file or application.

Warning

Under heavy-load circumstances in some environments, nbackup of Firebird 2.0.3 and below may cause problems that will lead to deadlocks or even corrupted databases.While these problems aren’t common, they are serious enough to warrant upgrading to Firebird 2.0.4 or higher if you want to use nbackup comfortably.If it concerns large databases under Posix, the use of direct I/O may also make a difference.More about this in the section Direct I/O.

Full backups

Making full backups

To make a full database backup, the command syntax is:

nbackup [-USER user -PASSWORD password] -BACKUP 0 database [backupfile]

For instance, assuming the database is located in C:\Data, and `nbackup.exe ` is in the search of path Windows:

C:\Data>nbackup -BACKUP 0 inventory.fdb inventory_1-Mar-2006.nbk

Or, if Firebird (from version 2.5) is running on non-standard port, in this example, 3051:

C:\Data>nbackup -BACKUP 0 localhost/3051:C:\Data\inventory.fdb C:\Data\inventory-level-0-Jul-2020.nbk -user SYSDBA -pass masterkey

In Firebird 3.0 and higher, in a case of successful completing the backup, the nbackup will print the short statistics:

time elapsed    0 sec
page reads      307
page writes     307

Comments

The backup level 0 indicates a full backup.Backup levels greater than 0 are used for incremental backups;we’ll discuss those later on.
Instead of a database filename you may also use an alias.
Instead of a backup filename you may also specify stdout.This will send the backup to standard output, from where you can redirect it to e.g. a tape archiver or a compression tool.
The -USER and -PASSWORD parameters may be omitted if at least one of the following conditions is met:
- The environment variables ISC_USER and ISC_PASSWORD have been set, either to SYSDBA or to the owner of the database.
- You are logged on as root on a Posix system.This makes you SYSDBA by default.
- Under Windows: Trusted authentication is enabled in firebird.conf, and you are logged on to the Windows account that owns the database.This is possible in Firebird 2.1 and above.
- Under Windows: Trusted authentication is enabled in firebird.conf, and you are logged on as a Windows administrator.In Firebird 2.1, this automatically gives you SYSDBA rights.In Firebird 2.5 and above, there is the additional condition that AUTO ADMIN MAPPING has been set in the database.
For clarity and brevity, the -USER and -PASSWORD parameters are not used in the examples.
Starting with Firebird 2.5, instead of -P password (or -PASSWORD password) you may also use -FE filename (or -FETCH_PASSWORD filename).This will cause nbackup to fetch the password from the given file.With -FE, the password itself doesn’t appear in the command and will thus be better shielded against people who might otherwise pick it up via the command history, the w command on Unix or from a script or batch-file.
In Firebird 3.0 and up, the firing of database triggers can be prevented by specifying the -NODBTRIGGERS option.For more information, see Suppressing database triggers.
In Firebird 2.1 and up, the firing of database triggers can be prevented by specifying the -T option.For more information, see Suppressing database triggers.The -T option was deprecated in Firebird 3.0 in favour of -NODBTRIGGERS.
Starting with Firebird 2.1.4, it is possible to force direct I/O on or off by specifying -D ON or -D OFF.For details and background see Direct I/O, elsewhere in this manual.
The different parameters (-BACKUP, -USER etc.) may occur in any order.Of course each parameter should be immediately followed by its own argument(s).In the case of -BACKUP there are three of them: backup level or guid, database, and backup file — in that order!
If the -B parameter comes last, you may leave out the name of the backup file.In that case nbackup will compose a filename based on the database name, the backup level, and the current date and time.This can lead to a name clash (and a failed backup) if two backup commands of the same level are issued in the same minute.

Warning

Do not use nbackup for multi-file databases.This can lead to corruption and loss of data, despite the fact that nbackup will not complain about such a command.

A word on the inner workings

Note	What follows here is not necessary knowledge to use nbackup. It just gives a rough (and incomplete) impression of what happens under the hood during execution of `nbackup -BACKUP`:

First of all, the main database file is locked by changing an internal state flag.From this moment on, any and all mutations in the database are written to a temporary file — the difference file or delta file.By default, the delta file is created in the same folder as a database file, with the additional extension .delta, for example: MyDatabase.fdb.delta
Then the actual backup is made.This isn’t a straight file copy;restoring must be done by nbackup as well.
Upon completion of the backup, the contents of the delta file are integrated with the main database file.After that, the database is unlocked (flag goes back to “normal”) and the delta is removed.

The functionality of steps 1 and 3 is provided by two new SQL statements: ALTER DATABASE BEGIN BACKUP and ALTER DATABASE END BACKUP.Contrary to what the names suggest, these statements do not take care of making the actual backup;rather, they create the conditions under which the main database file can be safely backed up.And to be clear: you don’t need to issue these commands yourself;nbackup will do that for you, at the right moments.

Restoring a full backup

A full backup is restored as follows:

nbackup -RESTORE database [backupfile]

For instance:

C:\Data> nbackup -RESTORE inventory.fdb inventory_1-Mar-2006.nbk

Comments

You don’t specify a level for a restore.
When restoring, the -RESTORE parameter must come last, for reasons that will become clear later.
Instead of a database filename you may also use an alias.
If the specified database file already exists, the restore fails, and you get an error message.
Here too, you may omit the name of the backup file.If you do, nbackup will prompt you for it.(Attention! In Firebird 2.0.0 this “interactive restore” feature is broken, leaving you with an error message and a failed restore. Fixed in 2.0.1.)
Restoring works purely on the filesystem level and can even be done without a Firebird server running.Any credentials supplied via the -USER and -PASSWORD parameters are ignored.The same goes for passwords read from a file.However, nbackup does try to read the password from the file if the -FETCH_PASSWORD parameter is present, and if an error occurs, the entire operation is abandoned.

Incremental backups

Warning

The incremental backup facility was entirely broken in Firebird 2.1.0, and fixed again in 2.1.1.

Making incremental backups

To make an incremental (“differential”) backup, specify a backup level greater than 0.An incremental backup of level N always contains the database mutations since the most recent level N-1 backup.

Examples:

One day after the full backup (level 0), you make one with level 1:

C:\Data> nbackup -BACKUP 1 inventory.fdb inventory_2-Mar-2006.nbk

This backup will only contain the mutations of the last day.

One day later again, you make another one with level 1:

C:\Data> nbackup -BACKUP 1 inventory.fdb inventory_3-Mar-2006.nbk

This one contains the mutations of the last two days, since the full backup, not only those since the previous level-1 backup.

Note	The previous incremental backup of any level must be completed before the start of the next incremental backup, otherwise `nbackup` execution will not do the desired backup, and return error "Database is already in the physical backup mode".

A couple of hours on we go for a level-2 backup:

C:\Data> nbackup -BACKUP 2 inventory.fdb inventory_3-Mar-2006_2.nbk

This youngest backup only contains the mutations since the most recent level-1 backup, that is: of the last few hours.

Important performance notice

Before Firebird 3.0, all incremental backups (i.e., level 1, 2, etc.) will read the whole database file to locate the changes and store them into a backup file.This can affect the database performance in a case of big databases (100Gb+) and slow disk subsystem (usually, slowness can be noticed on non-SSD drives).Starting from Firebird 3.0, only the changed portion of the database file is read, so incremental backups level 1 and higher are much faster, and reduce impact on database performance.

Note	All the comments that have been made about full backups also apply to incremental backups.

Warning

Again: do not use nbackup for multi-file databases.

Restoring incremental backups

When restoring incremental backups, you must specify the entire chain of backup files, from level 0 through the one you wish to restore.The database is always built up from the ground, step by step.(It is this stepwise adding until the database is restored that gave rise to the term incremental backup.)

The formal syntax is:

nbackup -R database [backup0 [backup1 [...] ] ]

So, restoring the level-2 backup from the previous example goes as follows:

C:\Data> nbackup -R inventory.fdb inventory_1-Mar-2006.nbk
           inventory_3-Mar-2006.nbk inventory_3-Mar-2006_2.nbk

Of course the line has been split here for layout reasons only — in reality you type the entire command and only hit kbd:[Enter] at the end.

Comments (in addition to the comments with restoring a full backup)

Because it is not known beforehand how many filenames will follow the -RESTORE switch (as we don’t specify a level when restoring), nbackup considers all arguments after the -RESTORE to be names of backup files.It is for this reason that no other parameter may follow the list of filenames.
There is no formal limit to the number of backup levels, but in practice it will rarely make sense to go beyond 3 or 4.

Non-connecting links

What happens if you accidentally leave out a file, or specify a series of files that don’t all belong together?You could imagine that you specify inventory_2-Mar-2006.nbk by mistake instead of inventory_3-Mar-2006.nbk in the above example.Both are level-1 backup files, so in both cases we get a nice “0, 1, 2” level series.But our level-2 file is incremental to the level-1 backup of 3 March, not to the one of 2 March.

Fortunately such a mistake can never lead to an incorrectly restored database.Each backup file has its own unique ID.Furthermore, each backup file of level 1 or above contains the ID of the backup on which it is based.When restoring, nbackup checks these IDs;if somewhere in the chain the links don’t connect, the operation is cancelled, and you get an error message.

Backing up raw-device databases

Firebird databases need not be files;they can also be placed on a so-called raw device, for instance a disk partition without a file system.The question of where the delta has to be placed in such cases was at first overlooked during the development of nbackup.On Posix systems, if the database was located at e.g. /dev/hdb5, it could happen that the delta was created as /dev/hdb5.delta.In light of the nature and purpose of the /dev directory and its often limited available space, this is undesirable.

As of Firebird 2.1, nbackup refuses to operate on raw-device databases unless an explicit location for the delta file has been set.The way to do this is discussed in [nbackup-deltafile], later on in this manual.

Suppressing database triggers (Firebird 2.1+)

Firebird 2.1 introduced the concept of database triggers.Certain types of these triggers can fire upon making or breaking a database connection.As part of the backup process, nbackup opens a regular connection to the database (in some versions even more than once).To prevent database triggers from firing inadvertently, the -T or — since Firebird 3.0 — -NODBTRIGGERS switch can be used.

Direct I/O (Firebird 2.1.4+)

Originally, nbackup used direct I/O only when making a backup under Windows NT (and successors like 2000, 2003 etc).On all other OS’es, direct I/O was off.This caused problems on some Linux systems, so in versions 2.0.6 and 2.1.3 direct I/O was switched on under Linux as well.However, this turned out to be problematic for certain other Linux configurations.In 2.1.4 and 2.5 the original behaviour was restored, but this time as a default that was overridable by a newly added parameter: -D.Its use is as follows:

nbackup -B 0 cups.fdb cups.nbk -D on    -- direct I/O on
nbackup -B 0 mugs.fdb mugs.nbk -D off   -- direct I/O off

Just like the option letters themselves, the arguments ON and OFF are case-insensitive.

Direct I/O is only applied when making a backup, not during a restore.Under Windows it is realized by setting FILE_FLAG_NO_BUFFERING.On other systems, O_DIRECT and POSIX_FADV_NOREUSE are used.The latter two are sometimes unavailable;in such cases, they are (or one of them is) silently left out.Even if the user specified -D on explicitly, this doesn’t lead to a warning or error message.

Informational options (Firebird 2.5+)

Apart from the already mentioned -FE and -D parameters, Firebird 2.5 also saw the introduction of the following two:

-Z: Shows single-line version information.This option can be used independently, but also in combination with other parameters, such as -B, -R, -L etc.
-?: Shows a summary of nbackup’s usage and command-line parameters.Attention: If this option is present, all the other parameters are ignored!

Backups on remote machines (Firebird 2.5+)

Nbackup itself only operates on local databases.But in Firebird 2.5 and up, nbackup-type backups and restores can also be performed remotely via the Services Manager.For this, the program fbsvcmgr.exe on the local machine is used;it is located in the same folder as nbackup.exe and the other Firebird command-line tools.The first argument is always “hostname:service_mgr”, with hostname being the name of the remote server.Other available parameters are:

-user username
-password password
-action_nbak
-action_nrest
-nbk_level n
-dbname database
-nbk_file filename
-nbk_no_triggers
-nbk_direct on|off

Making a full backup on the remote machine frodo goes like this:

fbsvcmgr frodo:service_mgr -user sysdba -password masterke
  -action_nbak -nbk_level 0
  -dbname C:\databases\countries.fdb -nbk_file C:\databases\countries.nbk

And a subsequent incremental backup:

fbsvcmgr frodo:service_mgr -user sysdba -password masterke
  -action_nbak -nbk_level 1
  -dbname C:\databases\countries.fdb -nbk_file C:\databases\countries_1.nbk

To restore the whole shebang:

fbsvcmgr frodo:service_mgr -user sysdba -password masterke
  -action_nrest -dbname C:\databases\countries_restored.fdb
  -nbk_file C:\databases\countries.nbk -nbk_file C:\databases\countries_1.nbk

Note

Each of the above commands should be typed as a single sentence, without line breaks.The hyphens before the parameter names may be omitted, but especially with long commands like these it may be helpful to leave them in, so you can easily identify the individual parameters (the arguments don’t get a hyphen).

Comments:

The Services Manager always requires authentication, be it automatic (root under Posix, trusted under Windows) or explicit through the parameters -user and -password.The environment variables ISC_USER and ISC_PASSWORD are not used.AUTO ADMIN MAPPING in the database has no effect when connecting remotely (though this may also depend on the configuration of the network).

Note: When Windows trusted authentication is in effect, the account name of the user on the local machine is passed to the Services Manager on the remote machine.If the owner of the remote database is a Windows account (e.g. FRODO\PAUL) rather than a Firebird account, and the Windows account name on the local machine is the same as the owner account name on the remote machine, the caller is acknowledged as the database owner and allowed to make a backup.This could pose a security risk, because even on local networks user PAUL on one machine is not necessarily the same person as user PAUL on another machine.
Restoring (-action_nrest) also requires authentication, but once verified the credentials are not used in any way.Hence, the user need not be the database owner, SYSDBA or superuser.In the case of Windows trusted authentication, the user need not exist at all on the remote machine (where the database is located).

This weak authentication implies another potential security risk.Suppose a sensitive database is nbackupped, and the backups are well protected on the filesystem level.An average user can’t restore the database with nbackup then, because nbackup runs in the user process space.But that same user, if he knows name and location of the backup, or can guess them by analogy, might be able to get hold of the database by having fbsvcmgr restore it to a public folder.After all, fbsvcmgr calls the Firebird server, which may have file-level access to the backup.Of course there are solutions to this, but it’s important to be aware of the risk.
The Services Manager can also be used locally;in that case the first argument becomes service_mgr, without hostname.When used locally, AUTO ADMIN MAPPING has the intended effect;this is still true if you prepend localhost: or the name of the local machine.Local use of the Services Manager can be beneficial if you don’t have filesystem access to the database and/or backup files, but the Firebird server process does.If you do have sufficient rights, then it’s more practical to use nbackup itself, with its much shorter commands.
Specifying -nbk_no_triggers or -nbk_direct with -action_nrest leads to an error message.Nbackup itself is more lenient here: it simply ignores the -T and -D parameters if they are used in the wrong context.
Instead of a database filename you may also use an alias.
Database path (or alias) length is limited to 255 characters.

A practical application

An nbackup-based incremental backup scheme could look like this:

Each month a full backup (level 0) is made;
Each week a level-1;
A level-2 backup daily;
A level-3 backup hourly.

As long as all backups are preserved, you can restore the database to its state at any hour in the past.For each restore action, a maximum of four backup files is used.Of course, you schedule things in such a way that the bigger, time-consuming backups are made during off-peak hours.In this case the levels 0 and 1 could be made at weekends, and level 2 at night.

If you don’t want to keep everything for eternity, you can add a deletion schedule:

Level-3 backups are deleted after 8 days;
Level-2s after a month;
Level-1s after six months;
Full backups after two years, but the first one of each year is kept.

This is only an example of course.What’s useful in an individual case depends on the application, the size of the database, its activity, etc.

Read on?

At this point you know everything you need in order to make and restore full and/or incremental backups with nbackup.You only need to read any further if you want to use backup tools of your own choice for your Firebird databases (see [nbackup-lock-unlock]), or if you want to override the default name or location of the delta file (see [nbackup-deltafile]).

If you have no craving for any of that: good luck in your work with nbackup!

Locking and unlocking

If you prefer to use your own backup tools or just make a file copy, nbackup’s lock-unlock mode comes into view.“Locking” means here that the main database file is frozen temporarily, not that no changes can be made to the database.Just like in backup mode, mutations are directed to a temporary delta file;upon unlocking, the delta file is merged with the main file.

As a reminder: nbackup.exe is located in the bin subdirectory of your Firebird folder.Typical locations are e.g. C:\Program Files\Firebird\Firebird_3_0 or C:\Program Files\Firebird\Firebird_2_0\bin (Windows) or /opt/firebird/bin (Linux).There’s no GUI;you launch it from the command prompt or call it from within a batch file or application.

Locking the database and making the backup yourself

A typical session in which you make your own backup goes as follows:

Lock the database with the -L (lock) switch:

nbackup [-U user -P password] -L database

Now copy/backup/zip the database file to your heart’s content, with your own choice of tools. A simple file copy is also possible.
Unlock the database with -N (uNlock), or — since Firebird 3.0 — -UN:
```
nbackup [-U user -P password] -N database
```

The last command will also cause any mutations — which have been written to the delta file — to be merged into the main file.

The backup you made contains the data as they were at the moment the database was locked, regardless how long the locked state has lasted, and regardless how long you may have waited before making the actual backup.

Comments:

Instead of a database filename you may also specify an alias.
The -U and -P parameters may be omitted if the envars ISC_USER and ISC_PASSWORD are set, if you are root on a Posix system, or if trusted authentication under Windows permits it.For a detailed description see the comments under Making full backups.
Starting with Firebird 2.5, instead of -P password you may also use -FE filename.
Both -L and -N (-UN) make a regular connection to the database, so in Firebird 2.1 and above it may be wise to add the -T (or -NODBTRIGGERS) parameter (see Suppressing database triggers).
If you’re locking a raw-device database with Firebird 2.1 or above, the -S option can be very helpful;see [nbackup-lock-unlock-rawdevices].
You can optionally add -Z to have version information printed on the first line of the output.

Warning

What goes for backup/restore also applies to the lock/unlock switches: do not use them on multi-file databases.Until things have changed, don’t let nbackup loose on multi-file databases at all!

Restoring a backup made after “nbackup -L”

A copy of a locked database is itself a locked database too, so you can’t just copy it back and start using it.Should your original database get lost or damaged and the self-made copy needs to be restored (or should you wish to install the copy on another machine), proceed like this:

Copy/restore/unzip the backed-up database file yourself with the necessary tools.
Now unlock the database, not with the -N (or -UN) switch, but with -F (fixup):
```
nbackup -F database
```
Here too, you can optionally use an alias instead of a filename, and add -Z for version info.Other options make no sense.

Why are there two unlock switches, -N/-UN and -F?

-N/-UN first sees that any changes made since the locking by -L are merged into the main database file.After that, the database goes back into normal read/write mode and the temporary file is deleted.
-F only changes the state flag of the user-restored database to “normal”.

So you use:

-N/-UN after having made a copy/backup yourself (to reverse the -L issued earlier);
-F after having restored such a backup yourself.

Note	The term fixup is used because it doesn’t attempt to reintegrate the delta-file, but only makes the minimum changes necessary to make the database file usable again.

Under the hood

Note	This section doesn’t contain any necessary knowledge, but provides some extra information which could deepen your understanding of the various switches.

nbackup [parameter] -L does the following:

Connect to the database;
Start a transaction;
Call ALTER DATABASE BEGIN BACKUP (this statement has been discussed in the extra information on nbackup -B);
Commit the transaction;
Disconnect from the database.

nbackup [parameter] -N follows the same steps, but with “… END BACKUP” in step 3.

nbackup [parameter] -F works as follows:

The restored database file is opened;
Within the file, the state flag is changed from locked (nbak_state_stalled) to normal (nbak_state_normal);
The file is closed again.

Note	nbackup `-F` operates purely on file level and can therefore also be performed without a Firebird server running.Any credentials supplied via the `-U`, `-P` or `-FE` parameters are ignored, just as with nbackup `-R`.

Locking raw-device databases

As discussed in [nbackup-backups-rawdevices], problems can arise if a delta has to be created for a database located on a raw device.Therefore, in Firebird 2.1 and up, nbackup refuses to operate on raw-device databases unless an explicit location for the delta file has been set previously.For the procedure, see [nbackup-deltafile], a little further down.

There’s also another problem if you lock and copy a raw device: you don’t know the actual size of the database!The raw device may be 10 GB, but the database might only take up 200 MB of that space.To prevent having to copy the entire device just to be on the safe side — possibly wasting huge amounts of time and space — Firebird 2.1 has introduced a new parameter for nbackup: -S.This parameter is only valid in combination with -L and when it is present, nbackup writes the database size in pages to stdout after locking the database.Because the size is given in pages, it has to be multiplied by the database page size in order to get the actual number of bytes to be copied.Or, if you use the dd copy utility, you could specify the page size as (i)bs and the output of nbackup -L -S as count.

Locking/Unlocking database in case of Virtual Machines Backup

Using Virtual Machines backup tools without preparing database for such type of backup can lead to the corrupted (i.e. useless) backup copy.

Firebird server intensively uses its own cache in RAM to speed up operations, and implements complex techniques to ensure database consistency at the every given moment.Virtual Machine backup tools are not aware about Firebird’s cache, and usually they do not consider database files as random-access files.

As a result, when the virtual machine backup is done, the database file inside it will have the state as after a hard reset of VM, and very often such copy is not consistent (i.e. corrupted).The chance of such problem is higher when many active users are changing the database, or if there is active sweep process.

Such inconsistent backups can occur in any virtualized environment, including public clouds.

In order to create good Firebird database backup with VM backup tool, it is necessary to lock database file with nbackup before the VM backup, and unlock after it.Usually VM backup tool allows executing custom pre- and post-backup scripts, where you can lock/unlock Firebird databases.

Setting the delta file

By default, the delta file lives in the same directory as the database itself.The file name is also the same, but with .delta appended.This is usually not a problem, but sometimes it is desirable or even necessary to change the location, e.g. when the database is stored on a raw device.Nbackup itself has no provision for setting the location;this must be done through SQL.

Make a connection to the database with any client that allows you to enter your own SQL statements and give the command:

alter database add difference file 'path-and-filename'

The custom delta file specification is persistent in the database;it is stored in the system table RDB$FILES.To revert to the default behaviour, issue the following statement:

alter database drop difference file

You can also specify a custom delta location while creating a new database:

create database 'path-and-dbname' difference file 'path-and-deltaname'

Note

If you specify a bare file name with [ADD] DIFFERENCE FILE, the delta will likely not be created in the same directory as the database, but in the current directory as seen from the server.On Windows this may be the system directory.The same logic applies to relative paths.
The entire directory path must already exist.Firebird doesn’t attempt to create any missing directories.
If you want to change your custom delta specification, you must first DROP the old one and then ADD the new one.

Backup history

The firebird database keeps a history of all nbackup activity in the system table RDB$BACKUP_HISTORY.This information is used by nbackup itself for internal housekeeping, but can also be used to find out when the last backup was done, on which level and what the filename is.

For example, to see the last 5` backups you can use:

SELECT RDB$BACKUP_ID, RDB$TIMESTAMP, RDB$BACKUP_LEVEL, RDB$GUID,
    RDB$SCN, RDB$FILE_NAME
FROM RDB$BACKUP_HISTORY
ORDER BY RDB$TIMESTAMP DESC
ROWS 5

The columns of RDB$BACKUP_HISTORY are:

Column Description

Column	Description
`RDB$BACKUP_ID`	Primary key
`RDB$TIMESTAMP`	Time and date of backup
`RDB$BACKUP_LEVEL`	Backup level
`RDB$GUID`	GUID of the backup (used to check dependencies between files)
`RDB$SCN`	Highest page marker in the backup
`RDB$FILE_NAME`	Filename of the backup

RDB$BACKUP_ID

Primary key

RDB$TIMESTAMP

Time and date of backup

RDB$BACKUP_LEVEL

Backup level

RDB$GUID

GUID of the backup (used to check dependencies between files)

RDB$SCN

Highest page marker in the backup

RDB$FILE_NAME

Filename of the backup

For an explanation of the field RDB$SCN see the section [nbackup-background].

The contents of the table RDB$BACKUP_HISTORY are not backed up and restored by gbak;see the section [nbackup-background] for details.

Technical background information

Nbackup performs a physical backup of the database pages by copying pages that have been modified since the last backup of the immediately preceding level.A level 0 backup copies all pages, while a level 1 copies only those pages that have been modified after the most recent level 0.To be able to find the modified pages, Firebird uses a marker that is called the SCN (short for page scan).This number is incremented at each backup state change.For each backup with nbackup there are three state changes:

nbak_state_normal (no backup) to nbak_state_stalled (database writes to delta file)
nbak_state_stalled to nbak_state_merge (merging delta file back into database)
nbak_state_merge to nbak_state_normal (no backup)

Note	These three state changes occur even if the backup fails.

The SCN of the database before the start of the backup is recorded together with the backup.The very first backup gets SCN 0, the second 3, etc.This number is independent of the level of the backup.The SCN is used to mark the pages of a database.So for example:

SCN Explanation

SCN	Explanation
`0`	Pages before any backup
`1`	Pages written/updated into the delta file during the backup
`2`	Pages written/updated during the merge of delta file into main backup
`3`	Pages written/updated after ending first backup+merge

0

Pages before any backup

1

Pages written/updated into the delta file during the backup

2

Pages written/updated during the merge of delta file into main backup

3

Pages written/updated after ending first backup+merge

When a level 1 backup is made, nbackup looks for the last level 0 backup and backs up all pages with an SCN higher than the SCN of that level 0 backup (and so on).

A backup and restore with gbak does not restore the content of the RDB$BACKUP_HISTORY table, and it resets the SCN of all pages back to 0.The reason for this is that gbak creates a logical backup instead of a physical backup.So a restore using gbak will rewrite the entire database (and can even change the page size).This renders previous backups with nbackup meaningless as a starting point for subsequent backups: you need to start with a fresh level 0.

Document history

The exact file history is recorded in the firebird-documentation git repository; see https://github.com/FirebirdSQL/firebird-documentation

Revision History

Revision History
0.1	21 Oct 2005	PV	First edition.
1.0	1 Dec 2006	PV	Removed “beta” reference in edition info.Changed warning against specifying backup file names interactively with nbackup -R.Removed “(or will be)” from first sentence in Document History. Changed `C:\Databases` to `C:\Data` in the examples, just to keep the lines from running out of the shaded `screen` areas in the PDF. Added section Setting the delta file, and changed section Read on? accordingly.
1.1	5 May 2008	PV	Making and restoring backups: Added warning about heavy-load risks with nbackup 2.0.0–2.0.3. Restoring a full backup: Corrected wrong statement that nbackup will overwrite an existing database if there are no active connections.Changed italic text about interactive restore failure to a Note and mentioned its fix in 2.0.1. Incremental backups: Inserted warning that incremental backups are broken in 2.1. Suppressing database triggers (Firebird 2.1+): New section. Read on?: Fixed typo (you → your).
1.2	19 Sep 2011	PV	Document source formatting: Changed max. line length to 100, without open lines. All sections and subsections now have an `id`. Introduction: Edited first sentence. Nbackup features — an overview: First sentence: groups → kinds.Edited last para before first subsection: mentioned that only `SYSDBA`, owner and sometimes OS admins can make a backup. Nbackup features — an overview :: Limitations of nbackup: Edited previously last listitem to mention Services Manager.Added listitem about direct file access.Removed last para. Functions and parameters: New section. Making and restoring backups: Slightly altered last sentence of first para.Extended warning: added info on the role of direct I/O with large databases under Posix.
			Making and restoring backups :: Full backups :: Making full backups: Corrected and extended listitem on `-U` and `-P` parameters.Added listitems on `-FE` parameter (new in 2.5), `-T` parameter (new in 2.1) and `-D` parameter (new in 2.5, backport to 2.1.4).In listitem starting with “The different parameters”, the parenthesized text now reads (`-B`, `-U` etc.), because many new parameters have been added. Making and restoring backups :: A word on the inner workings: Small edit (image → impression). Making and restoring backups :: Full backups :: Restoring a full backup: Removed parameters `-U` and `-P` from specification.Added listitem on aliases.Changed separate Note about interactive restore failure back to italic text inside the listitem itself.Added listitem about non-necessity of running server and ignoring credentials. Making and restoring backups :: Incremental backups: Edited Warning: mentioned fix in 2.1.1. Making and restoring backups :: Incremental backups :: Restoring incremental backups: Removed parameters `-U` and `-P` from formal syntax and 1st listitem. Making and restoring backups :: Backing up raw-device databases: New section. Making and restoring backups :: Suppressing database triggers: Edited and extended this section, but removed the “`SYSDBA` and owner only” remark. Making and restoring backups :: Direct I/O (Firebird 2.1.4+): New section. Making and restoring backups :: Informational options (Firebird 2.5+): New section. Making and restoring backups :: Backups on remote machines (Firebird 2.5+): New section. Locking and unlocking: Slightly altered last sentence of second para. Locking and unlocking :: Locking the database and backing up yourself: Added Comments (para + itemizedlist). Locking and unlocking :: Restoring a backup made after nbackup -L: Added info on use of alias and `-Z` to step 2 of procedure.In next para, translated “en” (leftover from Dutch original) → “and”.Added sentence to Note about reading `-F` as Flag-only. Locking and unlocking :: Locking raw-device databases: New section. Locking and unlocking :: Under the hood: Edited Note. Setting the delta file: 1st para largely rewritten;now refers to raw-device databases.Split off last sentence into a para of its own.Added info (para + programlisting) about setting delta with `CREATE DATABASE`.1st listitem in Notes: `ADD` → `[ADD]`.
			Document history: Changed ulink to CVS (both text and url);now points directly to document. License notice: End year in copyright mention now 2011.
1.3	12 Oct 2011	PV	Functions and parameters: In first table: self-restored → user-restored.In second table: self-restore → user restore. Locking and unlocking :: Locking the database and backing up yourself: Section renamed Locking the database and making the backup yourself. Locking and unlocking :: Restoring a backup made after nbackup -L: 2nd listitem in 1st itemizedlist: self-restored → user-restored.
1.4	18 Sep 2014	MR	Backup history: New section Technical background information New section
1.5	27 Jun 2020	MR	Conversion to AsciiDoc, minor copy-editing
1.6	25 Jul 2020	AK	Paragraph about VM backups, example with non-standard port, performance notice paragraph on incremental backup
1.7	10 Oct 2022	MR	Added switches introduced in Firebird 3.0 and 4.0 Various copy-editing Fix rendering of Document History in PDF by breaking long entries into multiple entries

0.1

21 Oct 2005

First edition.

1.0

1 Dec 2006

Removed “beta” reference in edition info.Changed warning against specifying backup file names interactively with nbackup -R.Removed “(or will be)” from first sentence in Document History.
Changed C:\Databases to C:\Data in the examples, just to keep the lines from running out of the shaded screen areas in the PDF.
Added section Setting the delta file, and changed section Read on? accordingly.

1.1

5 May 2008

Making and restoring backups: Added warning about heavy-load risks with nbackup 2.0.0–2.0.3.
Restoring a full backup: Corrected wrong statement that nbackup will overwrite an existing database if there are no active connections.Changed italic text about interactive restore failure to a Note and mentioned its fix in 2.0.1.
Incremental backups: Inserted warning that incremental backups are broken in 2.1.
Suppressing database triggers (Firebird 2.1+): New section.
Read on?: Fixed typo (you → your).

1.2

19 Sep 2011

Document source formatting: Changed max. line length to 100, without open lines.
All sections and subsections now have an id.
Introduction: Edited first sentence.
Nbackup features — an overview: First sentence: groups → kinds.Edited last para before first subsection: mentioned that only SYSDBA, owner and sometimes OS admins can make a backup.
Nbackup features — an overview :: Limitations of nbackup: Edited previously last listitem to mention Services Manager.Added listitem about direct file access.Removed last para.
Functions and parameters: New section.
Making and restoring backups: Slightly altered last sentence of first para.Extended warning: added info on the role of direct I/O with large databases under Posix.

Making and restoring backups :: Full backups :: Making full backups: Corrected and extended listitem on -U and -P parameters.Added listitems on -FE parameter (new in 2.5), -T parameter (new in 2.1) and -D parameter (new in 2.5, backport to 2.1.4).In listitem starting with “The different parameters”, the parenthesized text now reads (-B, -U etc.), because many new parameters have been added.
Making and restoring backups :: A word on the inner workings: Small edit (image → impression).
Making and restoring backups :: Full backups :: Restoring a full backup: Removed parameters -U and -P from specification.Added listitem on aliases.Changed separate Note about interactive restore failure back to italic text inside the listitem itself.Added listitem about non-necessity of running server and ignoring credentials.
Making and restoring backups :: Incremental backups: Edited Warning: mentioned fix in 2.1.1.
Making and restoring backups :: Incremental backups :: Restoring incremental backups: Removed parameters -U and -P from formal syntax and 1st listitem.
Making and restoring backups :: Backing up raw-device databases: New section.
Making and restoring backups :: Suppressing database triggers: Edited and extended this section, but removed the “SYSDBA and owner only” remark.
Making and restoring backups :: Direct I/O (Firebird 2.1.4+): New section.
Making and restoring backups :: Informational options (Firebird 2.5+): New section.
Making and restoring backups :: Backups on remote machines (Firebird 2.5+): New section.
Locking and unlocking: Slightly altered last sentence of second para.
Locking and unlocking :: Locking the database and backing up yourself: Added Comments (para + itemizedlist).
Locking and unlocking :: Restoring a backup made after nbackup -L: Added info on use of alias and -Z to step 2 of procedure.In next para, translated “en” (leftover from Dutch original) → “and”.Added sentence to Note about reading -F as Flag-only.
Locking and unlocking :: Locking raw-device databases: New section.
Locking and unlocking :: Under the hood: Edited Note.
Setting the delta file: 1st para largely rewritten;now refers to raw-device databases.Split off last sentence into a para of its own.Added info (para + programlisting) about setting delta with CREATE DATABASE.1st listitem in Notes: ADD → [ADD].

Document history: Changed ulink to CVS (both text and url);now points directly to document.

1.3

12 Oct 2011

Functions and parameters: In first table: self-restored → user-restored.In second table: self-restore → user restore.
Locking and unlocking :: Locking the database and backing up yourself: Section renamed Locking the database and making the backup yourself.
Locking and unlocking :: Restoring a backup made after nbackup -L: 2nd listitem in 1st itemizedlist: self-restored → user-restored.

1.4

18 Sep 2014

Backup history: New section
Technical background information New section

1.5

27 Jun 2020

Conversion to AsciiDoc, minor copy-editing

1.6

25 Jul 2020

Paragraph about VM backups, example with non-standard port, performance notice paragraph on incremental backup

1.7

10 Oct 2022

Added switches introduced in Firebird 3.0 and 4.0
Various copy-editing
Fix rendering of Document History in PDF by breaking long entries into multiple entries

Nbackup Features&Thinsp;—&Thinsp;An Overview

Nbackup features — an overview

Advantages of nbackup

docnext count = 29

Limitations of nbackup

Functions and parameters

Making and restoring backups

Full backups

Making full backups

A word on the inner workings

Restoring a full backup

Incremental backups

Making incremental backups

Important performance notice

Restoring incremental backups

Non-connecting links

Backing up raw-device databases

Suppressing database triggers (Firebird 2.1+)

Direct I/O (Firebird 2.1.4+)

Informational options (Firebird 2.5+)

Backups on remote machines (Firebird 2.5+)

A practical application

Read on?

Locking and unlocking

Locking the database and making the backup yourself

Restoring a backup made after “nbackup -L”

Under the hood

Locking raw-device databases

Locking/Unlocking database in case of Virtual Machines Backup

Setting the delta file

Backup history

Technical background information

Document history