FirebirdSQL logo

Transactions

Stored procedures and functions (including those defined in packages) are executed in the context of the transaction in which they are called.Triggers are executed as an intrinsic part of the operation of the DML statement: thus, their execution is within the same transaction context as the statement itself.Individual transactions are launched for database event triggers fired on connect or disconnect.

Statements that start and end transactions are not available in PSQL, but it is possible to run a statement or a block of statements in an autonomous transaction.

Module Structure

PSQL code modules consist of a header and a body.The DDL statements for defining them are complex statements;that is, they consist of a single statement that encloses blocks of multiple statements.These statements begin with a verb (CREATE, ALTER, DROP, RECREATE, CREATE OR ALTER, or EXECUTE BLOCK) and end with the last END statement of the body.

The Module Header

The header provides the module name and defines any input and output parameters or — for functions — the return type.Stored procedures and PSQL blocks may have input and output parameters.Functions may have input parameters and must have a scalar return type.Triggers do not have either input or output parameters, but DML triggers do have the NEW and OLD “records”, and INSERTING, UPDATING and DELETING variables.

The header of a trigger indicates the DML event (insert, update or delete, or a combination) or DDL or database event and the phase of operation (BEFORE or AFTER that event) that will cause it to “fire”.

The Module Body

The module body is either a PSQL module body, or an external module body.PSQL blocks can only have a PSQL module body.

Syntax of a Module Body
<module-body> ::=
  <psql-module-body> | <external-module-body>

<psql-module-body> ::=
  AS
    [<forward-declarations>]
    [<declarations>]
  BEGIN
    [<PSQL_statements>]
  END

<external-module-body> ::=
  EXTERNAL [NAME <extname>] ENGINE engine
  [AS '<extbody>']

<forward-declarations> ::=
  <forward-declare-item> [<forward-declare-item> ...]

<declarations> ::=
  <declare-item> [<declare-item> ...]

<forward-declare-item> ::=
    <subfunc-forward>
  | <subproc-forward>

<declare-item> ::=
    <declare-var>
  | <declare-cursor>
  | <subfunc-def>
  | <subproc-def>

<extname> ::=
  '<module-name>!<routine-name>[!<misc-info>]'

<declare-var> ::=
  !! See DECLARE VARIABLE !!

<declare-cursor> ::=
  !! See DECLARE .. CURSOR !!

<subfunc-forward>, <subfunc-def> ::=
  !! See DECLARE FUNCTION !!

<subproc-forward>, <subproc-def> ::=
  !! See DECLARE PROCEDURE !!
Table 1. Module Body Parameters
Parameter Description

declarations

Section for declaring local variables, named cursors, and subroutines

PSQL_statements

Procedural SQL statements.Some PSQL statements may not be valid in all types of PSQL.For example, RETURN <value>; is only valid in functions.

subfunc-forward

Sub-function forward declaration

subproc-forward

Sub-procedure forward declaration

declare_var

Local variable declaration

declare_cursor

Named cursor declaration

subfunc-def

Sub-function declaration

subproc-def

Sub-procedure declaration

extname

String identifying the external procedure

engine

String identifying the UDR engine

extbody

External procedure body.A string literal that can be used by UDRs for various purposes.

module-name

The name of the module that contains the procedure

routine-name

The internal name of the procedure inside the external module

misc-info

Optional string that is passed to the procedure in the external module

The PSQL Module Body

The PSQL module body starts with an optional section that declares variables and subroutines, followed by a block of statements that run in a logical sequence, like a program.A block of statements — or compound statement — is enclosed by the BEGIN and END keywords, and is executed as a single unit of code.The main BEGIN…​END block may contain any number of other BEGIN…​END blocks, both embedded and sequential.Blocks can be nested to a maximum depth of 512 blocks.All statements except BEGIN and END are terminated by semicolons (‘;’).No other character is valid for use as a terminator for PSQL statements.

Switching the Terminator in isql

Here we digress a little, to explain how to switch the terminator character in the isql utility to make it possible to define PSQL modules in that environment without conflicting with isql itself, which uses the same character, semicolon (‘;’), as its own statement terminator.

isql Command SET TERM

Sets the terminator character(s) to avoid conflict with the terminator character in PSQL statements

Available in

ISQL only

Syntax
SET TERM new_terminator old_terminator
Table 1. SET TERM Parameters
Argument Description

new_terminator

New terminator

old_terminator

Old terminator

When you write your triggers, stored procedures, stored functions or PSQL blocks in isql — either in the interactive interface or in scripts — running a SET TERM statement is needed to switch the normal isql statement terminator from the semicolon to another character or short string, to avoid conflicts with the non-changeable semicolon terminator in PSQL.The switch to an alternative terminator needs to be done before you begin defining PSQL objects or running your scripts.

The alternative terminator can be any string of characters except for a space, an apostrophe or the current terminator character(s).Any letter character(s) used will be case-sensitive.

Example

Changing the default semicolon to ‘^’ (caret) and using it to submit a stored procedure definition: character as an alternative terminator character:

SET TERM ^;

CREATE OR ALTER PROCEDURE SHIP_ORDER (
  PO_NUM CHAR(8))
AS
BEGIN
  /* Stored procedure body */
END^

/* Other stored procedures and triggers */

SET TERM ;^

/* Other DDL statements */
The External Module Body

The external module body specifies the UDR engine used to execute the external module, and optionally specifies the name of the UDR routine to call (<extname>) and/or a string (<extbody>) with UDR-specific semantics.

Configuration of external modules and UDR engines is not covered further in this Language Reference.Consult the documentation of a specific UDR engine for details.

Stored Procedures

A stored procedure is executable code stored in the database metadata for execution on the server.It can be called by other stored procedures (including itself), functions, triggers and client applications.A procedure that calls itself is known as recursive.

Benefits of Stored Procedures

Stored procedures have the following advantages:

Modularity

applications working with the database can use the same stored procedure, thereby reducing the size of the application code and avoiding code duplication.

Simpler Application Support

when a stored procedure is modified, changes appear immediately to all host applications, without the need to recompile them if the parameters were unchanged.

Enhanced Performance

since stored procedures are executed on a server instead of at the client, network traffic is reduced, which improves performance.

Types of Stored Procedures

Firebird supports two types of stored procedures: executable and selectable.

Executable Procedures

Executable procedures usually modify data in a database.They can receive input parameters and return a single set of output (RETURNS) parameters.They are called using the EXECUTE PROCEDURE statement.See an example of an executable stored procedure at the end of the CREATE PROCEDURE section of [fblangref50-ddl].

Selectable Procedures

Selectable stored procedures usually retrieve data from a database, returning an arbitrary number of rows to the caller.The caller receives the output one row at a time from a row buffer that the database engine prepares for it.

Selectable procedures can be useful for obtaining complex sets of data that are often impossible or too difficult or too slow to retrieve using regular DSQL SELECT queries.Typically, this style of procedure iterates through a looping process of extracting data, perhaps transforming it before filling the output variables (parameters) with fresh data at each iteration of the loop.A [fblangref50-psql-suspend] statement at the end of the iteration fills the buffer and waits for the caller to fetch the row.Execution of the next iteration of the loop begins when the buffer has been cleared.

Selectable procedures may have input parameters, and the output set is specified by the RETURNS clause in the header.

A selectable stored procedure is called with a SELECT statement.See an example of a selectable stored procedure at the end of the CREATE PROCEDURE section of [fblangref50-ddl].

Creating a Stored Procedure

The syntax for creating executable stored procedures and selectable stored procedures is the same.The difference comes in the logic of the program code, specifically the absence or presence of a [fblangref50-psql-suspend] statement.

For information about creating stored procedures, see CREATE PROCEDURE in [fblangref50-ddl].

Modifying a Stored Procedure

For information about modifying existing stored procedures, see ALTER PROCEDURE, CREATE OR ALTER PROCEDURE, RECREATE PROCEDURE.

Dropping a Stored Procedure

For information about dropping (deleting) stored procedures, see DROP PROCEDURE.

Stored Functions

A stored function is executable code stored in the database metadata for execution on the server.It can be called by other stored functions (including itself), procedures, triggers, and client applications through DML statements.A function that calls itself is known as recursive.

Unlike stored procedures, stored functions always return one scalar value.To return a value from a stored function, use the RETURN statement, which immediately terminates the function.

Creating a Stored Function

For information about creating stored functions, see CREATE FUNCTION in [fblangref50-ddl].

Modifying a Stored Function

For information about modifying stored functions, see ALTER FUNCTION, CREATE OR ALTER FUNCTION, RECREATE FUNCTION.

Dropping a Stored Function

For information about dropping (deleting) stored functions, see DROP FUNCTION.

PSQL Blocks

A self-contained, unnamed (“anonymous”) block of PSQL code can be executed dynamically in DSQL, using the EXECUTE BLOCK syntax.The header of a PSQL block may optionally contain input and output parameters.The body may contain local variables, cursor declarations and local routines, followed by a block of PSQL statements, and is similar to a stored procedure.A PSQL block cannot use a UDR module body.

A PSQL block is not defined and stored as an object, unlike stored procedures and triggers.It executes in run-time and cannot reference itself.

Like stored procedures, anonymous PSQL blocks can be used to process data and to retrieve data from the database.

Syntax (incomplete)
EXECUTE BLOCK
  [(<inparam> = ? [, <inparam> = ? ...])]
  [RETURNS (<outparam> [, <outparam> ...])]
  <psql-module-body>

<psql-module-body> ::=
  !! See Syntax of Module Body !!
Table 1. PSQL Block Parameters
Argument Description

inparam

Input parameter description

outparam

Output parameter description

declarations

A section for declaring local variables and named cursors

PSQL statements

PSQL and DML statements

See also

See EXECUTE BLOCK for details.

Packages

A package is a group of stored procedures and functions defined as a single database object.

Firebird packages are made up of two parts: a header (PACKAGE keyword) and a body (PACKAGE BODY keywords).This separation is similar to Delphi modules;the header corresponds to the interface part, and the body corresponds to the implementation part.

Benefits of Packages

The notion of “packaging” the code components of a database operation addresses has several advantages:

Modularisation

Blocks of interdependent code are grouped into logical modules, as done in other programming languages.

In programming, it is well recognised that grouping code in various ways, in namespaces, units or classes, for example, is a good thing.This is not possible with standard stored procedures and functions in the database.Although they can be grouped in different script files, two problems remain:

  1. The grouping is not represented in the database metadata.

  2. Scripted routines all participate in a flat namespace and are callable by everyone (we are not referring to security permissions here).

Easier tracking of dependencies

Packages make it easy to track dependencies between a collection of related routines, as well as between this collection and other routines, both packaged and unpackaged.

Whenever a packaged routine determines that it uses a certain database object, a dependency on that object is registered in Firebird’s system tables.Thereafter, to drop, or maybe alter that object, you first need to remove what depends on it.Since the dependency on other objects only exists for the package body, and not the package header, this package body can easily be removed, even if another object depends on this package.When the body is dropped, the header remains, allowing you to recreate its body once the changes related to the removed object are done.

Simplify permission management

As Firebird — by default — runs routines with the caller (invoker) privileges, it is necessary also to grant resource usage to each routine when these resources would not be directly accessible to the caller.Usage of each routine needs to be granted to users and/or roles.

Packaged routines do not have individual privileges.The privileges apply to the package as a whole.Privileges granted to packages are valid for all package body routines, including private ones, but are stored for the package header.An EXECUTE privilege on a package granted to a user (or other object), grants that user the privilege to execute all routines defined in the package header.

For example
GRANT SELECT ON TABLE secret TO PACKAGE pk_secret;
GRANT EXECUTE ON PACKAGE pk_secret TO ROLE role_secret;
Private scopes

Stored procedures and functions can be privates;that is, make them available only for internal usage within the defining package.

All programming languages have the notion of routine scope, which is not possible without some form of grouping.Firebird packages also work like Delphi units in this regard.If a routine is not declared in the package header (interface) and is implemented in the body (implementation), it becomes a private routine.A private routine can only be called from inside its package.

Creating a Package

For information on creating packages, see CREATE PACKAGE, and CREATE PACKAGE BODY in [fblangref50-ddl].

Modifying a Package

For information on modifying existing package header or bodies, see ALTER PACKAGE, CREATE OR ALTER PACKAGE, RECREATE PACKAGE, ALTER PACKAGE BODY, and RECREATE PACKAGE BODY.

Dropping a Package

For information on dropping (deleting) a package, see DROP PACKAGE, and DROP PACKAGE BODY.

Triggers

A trigger is another form of executable code that is stored in the metadata of the database for execution by the server.A trigger cannot be called directly.It is called automatically (“fired”) when data-changing events involving one particular table or view occur, or on a specific database or DDL event.

A trigger applies to exactly one table or view or database event, and only one phase in an event (BEFORE or AFTER the event).A single DML trigger might be written to fire only when one specific data-changing event occurs (INSERT, UPDATE or DELETE), or it might be written to apply to more than one of those.

A DML trigger is executed in the context of the transaction in which the data-changing DML statement is running.For triggers that respond to database events, the rule is different: for DDL triggers and transaction triggers, the trigger runs in the same transaction that executed the DDL, for other types, a new default transaction is started.

Firing Order (Order of Execution)

More than one trigger can be defined for each phase-event combination.The order in which they are executed — also known as “firing order” — can be specified explicitly with the optional POSITION argument in the trigger definition.You have 32,767 numbers to choose from.Triggers with the lowest position numbers fire first.

If a POSITION clause is omitted, or if several matching event-phase triggers have the same position number, then the triggers will fire in alphabetical order.

DML Triggers

DML triggers are those that fire when a DML operation changes the state of data: updating rows in tables, inserting new rows or deleting rows.They can be defined for both tables and views.

Trigger Options

Six base options are available for the event-phase combination for tables and views:

Before a new row is inserted

BEFORE INSERT

After a new row is inserted

AFTER INSERT

Before a row is updated

BEFORE UPDATE

After a row is updated

AFTER UPDATE

Before a row is deleted

BEFORE DELETE

After a row is deleted

AFTER DELETE

These base forms are for creating single phase/single-event triggers.Firebird also supports forms for creating triggers for one phase and multiple-events, BEFORE INSERT OR UPDATE OR DELETE, for example, or AFTER UPDATE OR DELETE: the combinations are your choice.

Note

“Multi-phase” triggers, such as BEFORE OR AFTER …​, are not possible.

The Boolean context variables INSERTING, UPDATING and DELETING can be used in the body of a trigger to determine the type of event that fired the trigger.

OLD and NEW Context Variables

For DML triggers, the Firebird engine provides access to sets of OLD and NEW context variables (or, “records”).Each is a record of the values of the entire row: one for the values as they are before the data-changing event (the BEFORE phase) and one for the values as they will be after the event (the AFTER phase).They are referenced in statements using the form NEW.column_name and OLD.column_name, respectively.The column_name can be any column in the table’s definition, not just those that are being updated.

The NEW and OLD variables are subject to some rules:

  • In all triggers, OLD is read-only

  • In BEFORE UPDATE and BEFORE INSERT code, the NEW value is read/write, unless it is a COMPUTED BY column

  • In INSERT triggers, references to OLD are invalid and will throw an exception

  • In DELETE triggers, references to NEW are invalid and will throw an exception

  • In all AFTER trigger code, NEW is read-only

Database Triggers

A trigger associated with a database or transaction event can be defined for the following events:

Connecting to a database

ON CONNECT

Before the trigger is executed, a transaction is automatically started with the default isolation level (snapshot (concurrency), write, wait)

Disconnecting from a database

ON DISCONNECT

Before the trigger is executed, a transaction is automatically started with the default isolation level (snapshot (concurrency), write, wait)

When a transaction is started

ON TRANSACTION START

The trigger is executed in the transaction context of the started transaction (immediately after start)

When a transaction is committed

ON TRANSACTION COMMIT

The trigger is executed in the transaction context of the committing transaction (immediately before commit)

When a transaction is cancelled

ON TRANSACTION ROLLBACK

The trigger is executed in the transaction context of the rolling back transaction (immediately before roll back)

DDL Triggers

DDL triggers fire on specified metadata change events in a specified phase.BEFORE triggers run before changes to system tables.AFTER triggers run after changes to system tables.

DDL triggers are a specific type of database trigger, so most rules for and semantics of database triggers also apply for DDL triggers.

Semantics

  1. BEFORE triggers are fired before changes to the system tables.AFTER triggers are fired after system table changes.

    Important
    Important Rule

    The event type [BEFORE | AFTER] of a DDL trigger cannot be changed.

  2. When a DDL statement fires a trigger that raises an exception (BEFORE or AFTER, intentionally or unintentionally) the statement will not be committed.That is, exceptions can be used to ensure that a DDL operation will fail if the conditions are not precisely as intended.

  3. DDL trigger actions are executed only when committing the transaction in which the affected DDL command runs.Never overlook the fact that what is possible to do in an AFTER trigger is exactly what is possible to do after a DDL command without autocommit.You cannot, for example, create a table and then use it in the trigger.

  4. With “CREATE OR ALTER” statements, a trigger is fired one time at the CREATE event or the ALTER event, according to the previous existence of the object.With RECREATE statements, a trigger is fired for the DROP event if the object exists, and for the CREATE event.

  5. ALTER and DROP events are generally not fired when the object name does not exist.For the exception, see point 6.

  6. The exception to rule 5 is that BEFORE ALTER/DROP USER triggers fire even when the username does not exist.This is because, underneath, these commands perform DML on the security database, and the verification is not done before the command on it is run.This is likely to be different with embedded users, so do not write code that depends on this.

  7. If an exception is raised after the DDL command starts its execution and before AFTER triggers are fired, AFTER triggers will not be fired.

  8. Packaged procedures and functions do not fire individual {CREATE | ALTER | DROP} {PROCEDURE | FUNCTION} triggers.

The DDL_TRIGGER Context Namespace

When a DDL trigger is running, the DDL_TRIGGER namespace is available for use with RDB$GET_CONTEXT.This namespace contains information on the currently firing trigger.

Dropping a Trigger

For information on dropping (deleting) triggers, see DROP TRIGGER.

Writing the Body Code

This section takes a closer look at the procedural SQL language constructs and statements that are available for coding the body of a stored procedure, functions, trigger, and PSQL blocks.

Colon Marker (‘:’)

The colon marker prefix (‘:’) is used in PSQL to mark a reference to a variable in a DML statement.The colon marker is not required before variable names in other PSQL code.

The colon prefix can also be used for the NEW and OLD contexts, and for cursor variables.

Assignment Statements

Assigns a value to a variable

Syntax
varname = <value_expr>;
Table 1. Assignment Statement Parameters
Argument Description

varname

Name of a parameter or local variable

value_expr

An expression, constant or variable whose value resolves to the same data type as varname

PSQL uses the equal symbol (‘=’) as its assignment operator.The assignment statement assigns a SQL expression value on the right to the variable on the left of the operator.The expression can be any valid SQL expression: it may contain literals, internal variable names, arithmetic, logical and string operations, calls to internal functions, stored functions or external functions (UDFs).

Example using assignment statements

CREATE PROCEDURE MYPROC (
  a INTEGER,
  b INTEGER,
  name VARCHAR (30)
)
RETURNS (
  c INTEGER,
  str VARCHAR(100))
AS
BEGIN
  -- assigning a constant
  c = 0;
  str = '';
  SUSPEND;
  -- assigning expression values
  c = a + b;
  str = name || CAST(b AS VARCHAR(10));
  SUSPEND;
  -- assigning expression value built by a query
  c = (SELECT 1 FROM rdb$database);
  -- assigning a value from a context variable
  str = CURRENT_USER;
  SUSPEND;
END

BREAK

Exits a loop

Syntax
[label:]
<loop_stmt>
BEGIN
  ...
  BREAK;
  ...
END

<loop_stmt> ::=
    FOR <select_stmt> INTO <var_list> DO
  | FOR EXECUTE STATEMENT ... INTO <var_list> DO
  | WHILE (<condition>)} DO
Table 1. BREAK Statement Parameters
Argument Description

label

Label

select_stmt

SELECT statement

condition

A logical condition returning TRUE, FALSE or UNKNOWN

The BREAK statement immediately terminates the inner loop of a WHILE or FOR looping statement.Code continues to be executed from the first statement after the terminated loop block.

BREAK is similar to LEAVE, except it doesn’t support a label.

LEAVE

Exits a loop

Syntax
[label:]
<loop_stmt>
BEGIN
  ...
  LEAVE [label];
  ...
END

<loop_stmt> ::=
    FOR <select_stmt> INTO <var_list> DO
  | FOR EXECUTE STATEMENT ... INTO <var_list> DO
  | WHILE (<condition>)} DO
Table 1. LEAVE Statement Parameters
Argument Description

label

Label

select_stmt

SELECT statement

condition

A logical condition returning TRUE, FALSE or UNKNOWN

The LEAVE statement immediately terminates the inner loop of a WHILE or FOR looping statement.Using the optional label parameter, LEAVE can also exit an outer loop, that is, the loop labelled with label.Code continues to be executed from the first statement after the terminated loop block.

LEAVE Examples

  1. Leaving a loop if an error occurs on an insert into the NUMBERS table.The code continues to be executed from the line C = 0.

    ...
    WHILE (B < 10) DO
    BEGIN
      INSERT INTO NUMBERS(B)
      VALUES (:B);
      B = B + 1;
      WHEN ANY DO
      BEGIN
        EXECUTE PROCEDURE LOG_ERROR (
          CURRENT_TIMESTAMP,
          'ERROR IN B LOOP');
        LEAVE;
      END
    END
    C = 0;
    ...
  2. An example using labels in the LEAVE statement.LEAVE LOOPA terminates the outer loop and LEAVE LOOPB terminates the inner loop.Note that the plain LEAVE statement would be enough to terminate the inner loop.

    ...
    STMT1 = 'SELECT NAME FROM FARMS';
    LOOPA:
    FOR EXECUTE STATEMENT :STMT1
    INTO :FARM DO
    BEGIN
      STMT2 = 'SELECT NAME ' || 'FROM ANIMALS WHERE FARM = ''';
      LOOPB:
      FOR EXECUTE STATEMENT :STMT2 || :FARM || ''''
      INTO :ANIMAL DO
      BEGIN
        IF (ANIMAL = 'FLUFFY') THEN
          LEAVE LOOPB;
        ELSE IF (ANIMAL = FARM) THEN
          LEAVE LOOPA;
        SUSPEND;
      END
    END
    ...

CONTINUE

Continues with the next iteration of a loop

Syntax
[label:]
<loop_stmt>
BEGIN
  ...
  CONTINUE [label];
  ...
END

<loop_stmt> ::=
    FOR <select_stmt> INTO <var_list> DO
  | FOR EXECUTE STATEMENT ... INTO <var_list> DO
  | WHILE (<condition>)} DO
Table 1. CONTINUE Statement Parameters
Argument Description

label

Label

select_stmt

SELECT statement

condition

A logical condition returning TRUE, FALSE or UNKNOWN

The CONTINUE statement skips the remainder of the current block of a loop and starts the next iteration of the current WHILE or FOR loop.Using the optional label parameter, CONTINUE can also start the next iteration of an outer loop, that is, the loop labelled with label.

CONTINUE Examples

Using the CONTINUE statement
FOR SELECT A, D
  FROM ATABLE INTO achar, ddate
DO
BEGIN
  IF (ddate < current_date - 30) THEN
    CONTINUE;
  /* do stuff */
END

EXIT

Terminates execution of a module

Syntax
EXIT;

The EXIT statement causes execution of the current PSQL module to jump to the final END statement from any point in the code, thus terminating the program.

Calling EXIT in a function will result in the function returning NULL.

EXIT Examples

Using the EXIT statement in a selectable procedure
CREATE PROCEDURE GEN_100
  RETURNS (I INTEGER)
AS
BEGIN
  I = 1;
  WHILE (1=1) DO
  BEGIN
    SUSPEND;
    IF (I=100) THEN
      EXIT;
    I = I + 1;
  END
END

SUSPEND

Passes output to the buffer and suspends execution while waiting for caller to fetch it

Syntax
SUSPEND;

The SUSPEND statement is used in selectable stored procedures to pass the values of output parameters to a buffer and suspend execution.Execution remains suspended until the calling application fetches the contents of the buffer.Execution resumes from the statement directly after the SUSPEND statement.In practice, this is likely to be a new iteration of a looping process.

Important
Important Notes
  1. The SUSPEND statement can only occur in stored procedures or sub-procedures

  2. The presence of the SUSPEND keyword defines a stored procedure as a selectable procedure

  3. Applications using interfaces that wrap the API perform the fetches from selectable procedures transparently.

  4. If a selectable procedure is executed using EXECUTE PROCEDURE, it behaves as an executable procedure.When a SUSPEND statement is executed in such a stored procedure, it is the same as executing the EXIT statement, resulting in immediate termination of the procedure.

  5. SUSPEND“breaks” the atomicity of the block in which it is located.If an error occurs in a selectable procedure, statements executed after the final SUSPEND statement will be rolled back.Statements that executed before the final SUSPEND statement will not be rolled back unless the transaction is rolled back.

SUSPEND Examples

Using the SUSPEND statement in a selectable procedure
CREATE PROCEDURE GEN_100
  RETURNS (I INTEGER)
AS
BEGIN
  I = 1;
  WHILE (1=1) DO
  BEGIN
    SUSPEND;
    IF (I=100) THEN
      EXIT;
    I = I + 1;
  END
END

EXECUTE STATEMENT

Executes dynamically created SQL statements

Syntax
<execute_statement> ::= EXECUTE STATEMENT <argument>
  [<option> ...]
  [INTO <variables>];

<argument> ::= <paramless_stmt>
            | (<paramless_stmt>)
            | (<stmt_with_params>) (<param_values>)

<param_values> ::= <named_values> | <positional_values>

<named_values> ::= <named_value> [, <named_value> ...]

<named_value> ::= [EXCESS] paramname := <value_expr>

<positional_values> ::= <value_expr> [, <value_expr> ...]

<option> ::=
    WITH {AUTONOMOUS | COMMON} TRANSACTION
  | WITH CALLER PRIVILEGES
  | AS USER user
  | PASSWORD password
  | ROLE role
  | ON EXTERNAL [DATA SOURCE] <connection_string>

<connection_string> ::=
  !! See <filespec> in the CREATE DATABASE syntax !!

<variables> ::= [:]varname [, [:]varname ...]
Table 1. EXECUTE STATEMENT Statement Parameters
Argument Description

paramless_stmt

Literal string or variable containing a non-parameterized SQL query

stmt_with_params

Literal string or variable containing a parameterized SQL query

paramname

SQL query parameter name

value_expr

SQL expression resolving to a value

user

Username.It can be a string, CURRENT_USER or a string variable

password

Password.It can be a string or a string variable

role

Role.It can be a string, CURRENT_ROLE or a string variable

connection_string

Connection string.It can be a string literal or a string variable

varname

Variable

The statement EXECUTE STATEMENT takes a string parameter and executes it as if it were a DSQL statement.If the statement returns data, it can be passed to local variables by way of an INTO clause.

EXECUTE STATEMENT can only produce a single row of data.Statements producing multiple rows of data must be executed with [fblangref50-psql-forexec].

Parameterized Statements

You can use parameters — either named or positional — in the DSQL statement string.Each parameter must be assigned a value.

Special Rules for Parameterized Statements
  1. Named and positional parameters cannot be mixed in one query

  2. Each parameter must be used in the statement text.

    To relax this rule, named parameters can be prefixed with the keyword EXCESS to indicate that the parameter may be absent from the statement text.This option is useful for dynamically generated statements that conditionally include or exclude certain parameters.

  3. If the statement has parameters, they must be enclosed in parentheses when EXECUTE STATEMENT is called, regardless of whether they come directly as strings, as variable names or as expressions

  4. Each named parameter must be prefixed by a colon (‘:’) in the statement string itself, but not when the parameter is assigned a value

  5. Positional parameters must be assigned their values in the same order as they appear in the query text

  6. The assignment operator for parameters is the special operator “:=”, similar to the assignment operator in Pascal

  7. Each named parameter can be used in the statement more than once, but its value must be assigned only once

  8. With positional parameters, the number of assigned values must match the number of parameter placeholders (question marks) in the statement exactly

  9. A named parameter in the statement text can only be a regular identifier (it cannot be a quoted identifier)

Examples of EXECUTE STATEMENT with parameters
  1. With named parameters:

    ...
    DECLARE license_num VARCHAR(15);
    DECLARE connect_string VARCHAR (100);
    DECLARE stmt VARCHAR (100) =
      'SELECT license '
      'FROM cars '
      'WHERE driver = :driver AND location = :loc';
    BEGIN
      -- ...
      EXECUTE STATEMENT (stmt)
        (driver := current_driver,
         loc := current_location)
      ON EXTERNAL connect_string
      INTO license_num;
  2. The same code with positional parameters:

    DECLARE license_num VARCHAR (15);
    DECLARE connect_string VARCHAR (100);
    DECLARE stmt VARCHAR (100) =
      'SELECT license '
      'FROM cars '
      'WHERE driver = ? AND location = ?';
    BEGIN
      -- ...
      EXECUTE STATEMENT (stmt)
        (current_driver, current_location)
      ON EXTERNAL connect_string
      INTO license_num;
  3. Use of EXCESS to allow named parameters to be unused (note: this is a FOR EXECUTE STATEMENT):

CREATE PROCEDURE P_EXCESS (A_ID INT, A_TRAN INT = NULL, A_CONN INT = NULL)
  RETURNS (ID INT, TRAN INT, CONN INT)
AS
DECLARE S VARCHAR(255) = 'SELECT * FROM TTT WHERE ID = :ID';
DECLARE W VARCHAR(255) = '';
BEGIN
  IF (A_TRAN IS NOT NULL)
  THEN W = W || ' AND TRAN = :a';

  IF (A_CONN IS NOT NULL)
  THEN W = W || ' AND CONN = :b';

  IF (W <> '')
  THEN S = S || W;

  -- could raise error if TRAN or CONN is null
  -- FOR EXECUTE STATEMENT (:S) (a := :A_TRAN, b := A_CONN, id := A_ID)

  -- OK in all cases
  FOR EXECUTE STATEMENT (:S) (EXCESS a := :A_TRAN, EXCESS b := A_CONN, id := A_ID)
    INTO :ID, :TRAN, :CONN
      DO SUSPEND;
END

WITH {AUTONOMOUS | COMMON} TRANSACTION

By default, the executed SQL statement runs within the current transaction.Using WITH AUTONOMOUS TRANSACTION causes a separate transaction to be started, with the same parameters as the current transaction.This separate transaction will be committed when the statement was executed without errors and rolled back otherwise.

The clause WITH COMMON TRANSACTION uses the current transaction whenever possible;this is the default behaviour.If the statement must run in a separate connection, an already started transaction within that connection is used, if available.Otherwise, a new transaction is started with the same parameters as the current transaction.Any new transactions started under the “COMMON” regime are committed or rolled back with the current transaction.

WITH CALLER PRIVILEGES

By default, the SQL statement is executed with the privileges of the current user.Specifying WITH CALLER PRIVILEGES combines the privileges of the calling procedure or trigger with those of the user, as if the statement were executed directly by the routine.WITH CALLER PRIVILEGES has no effect if the ON EXTERNAL clause is also present.

ON EXTERNAL [DATA SOURCE]

With ON EXTERNAL [DATA SOURCE], the SQL statement is executed in a separate connection to the same or another database, possibly even on another server.If connection_string is NULL or “''” (empty string), the entire ON EXTERNAL [DATA SOURCE] clause is considered absent, and the statement is executed against the current database.

Connection Pooling
  • External connections made by statements WITH COMMON TRANSACTION (the default) will remain open until the current transaction ends.They can be reused by subsequent calls to EXECUTE STATEMENT, but only if connection_string is identical, including case

  • External connections made by statements WITH AUTONOMOUS TRANSACTION are closed as soon as the statement has been executed

  • Statements using WITH AUTONOMOUS TRANSACTION can and will re-use connections that were opened earlier by statements WITH COMMON TRANSACTION.If this happens, the reused connection will be left open after the statement has been executed.(It must be, because it has at least one active transaction!)

Transaction Pooling
  • If WITH COMMON TRANSACTION is in effect, transactions will be reused as much as possible.They will be committed or rolled back together with the current transaction

  • If WITH AUTONOMOUS TRANSACTION is specified, a fresh transaction will always be started for the statement.This transaction will be committed or rolled back immediately after the statement’s execution

Exception Handling

When ON EXTERNAL is used, the extra connection is always made via a so-called external provider, even if the connection is to the current database.One of the consequences is that exceptions cannot be caught in the usual way.Every exception caused by the statement is wrapped in either an eds_connection or an eds_statement error.To catch them in your PSQL code, you have to use WHEN GDSCODE eds_connection, WHEN GDSCODE eds_statement or WHEN ANY.

Note

Without ON EXTERNAL, exceptions are caught in the usual way, even if an extra connection is made to the current database.

Miscellaneous Notes
  • The character set used for the external connection is the same as that for the current connection

  • Two-phase commits are not supported

AS USER, PASSWORD and ROLE

The optional AS USER, PASSWORD and ROLE clauses allow specification of which user will execute the SQL statement and with which role.The method of user login, and whether a separate connection is opened, depends on the presence and values of the ON EXTERNAL [DATA SOURCE], AS USER, PASSWORD and ROLE clauses:

  • If ON EXTERNAL is present, a new connection is always opened, and:

    • If at least one of AS USER, PASSWORD and ROLE is present, native authentication is attempted with the given parameter values (locally or remotely, depending on connection_string).No defaults are used for missing parameters

    • If all three are absent, and connection_string contains no hostname, then the new connection is established on the local server with the same user and role as the current connection.The term 'local' means “on the same machine as the server” here.This is not necessarily the location of the client

    • If all three are absent, and connection_string contains a hostname, then trusted authentication is attempted on the remote host (again, 'remote' from the perspective of the server).If this succeeds, the remote operating system will provide the username (usually the operating system account under which the Firebird process runs)

  • If ON EXTERNAL is absent:

    • If at least one of AS USER, PASSWORD and ROLE is present, a new connection to the current database is opened with the supplied parameter values.No defaults are used for missing parameters

    • If all three are absent, the statement is executed within the current connection

Note

If a parameter value is NULL or “''” (empty string), the entire parameter is considered absent.Additionally, AS USER is considered absent if its value is equal to CURRENT_USER, and ROLE if it is the same as CURRENT_ROLE.

Caveats with EXECUTE STATEMENT

  1. There is no way to validate the syntax of the enclosed statement

  2. There are no dependency checks to discover whether tables or columns have been dropped

  3. Execution is considerably slower than when the same statements are executed directly as PSQL code

  4. Return values are strictly checked for data type to avoid unpredictable type-casting exceptions.For example, the string '1234' would convert to an integer, 1234, but 'abc' would give a conversion error

All in all, this feature is meant to be used cautiously, and you should always take the caveats into account.If you can achieve the same result with PSQL and/or DSQL, it will almost always be preferable.

FOR SELECT

Loops row-by-row through a query result set

Syntax
[label:]
FOR <select_stmt> [AS CURSOR cursor_name]
  DO <compound_statement>
Table 1. FOR SELECT Statement Parameters
Argument Description

label

Optional label for LEAVE and CONTINUE.Follows the rules for identifiers.

select_stmt

SELECT statement

cursor_name

Cursor name.It must be unique among cursor names in the PSQL module (stored procedure, stored function, trigger or PSQL block)

compound_statement

A single statement, or statements wrapped in BEGIN…​END, that performs all the processing for this FOR loop

The FOR SELECT statement

  • retrieves each row sequentially from the result set, and executes the statement or block of statements for each row.In each iteration of the loop, the field values of the current row are copied into pre-declared variables.

    Including the AS CURSOR clause enables positioned deletes and updates to be performed — see notes below

  • can embed other FOR SELECT statements

  • can contain named parameters that must be previously declared in the DECLARE VARIABLE statement or exist as input or output parameters of the procedure

  • requires an INTO clause at the end of the SELECT …​ FROM …​ specification if AS CURSOR is absentIn each iteration of the loop, the field values of the current row are copied to the list of variables specified in the INTO clause.The loop repeats until all rows are retrieved, after which it terminates

  • can be terminated before all rows are retrieved by using a BREAK, LEAVE or EXIT statement

The Undeclared Cursor

The optional AS CURSOR clause surfaces the result set of the FOR SELECT structure as an undeclared, named cursor that can be operated on using the WHERE CURRENT OF clause inside the statement or block following the DO command, to delete or update the current row before execution moves to the next row.In addition, it is possible to use the cursor name as a record variable (similar to OLD and NEW in triggers), allowing access to the columns of the result set (i.e. cursor_name.columnname).

Rules for Cursor Variables
  • When accessing a cursor variable in a DML statement, the colon prefix can be added before the cursor name (i.e. :cursor_name.columnname) for disambiguation, similar to variables.

    The cursor variable can be referenced without colon prefix, but in that case, depending on the scope of the contexts in the statement, the name may resolve in the statement context instead of to the cursor (e.g. you select from a table with the same name as the cursor).

  • Cursor variables are read-only

  • In a FOR SELECT statement without an AS CURSOR clause, you must use the INTO clause.If an AS CURSOR clause is specified, the INTO clause is allowed, but optional;you can access the fields through the cursor instead.

  • Reading from a cursor variable returns the current field values.This means that an UPDATE statement (with a WHERE CURRENT OF clause) will update not only the table, but also the fields in the cursor variable for subsequent reads.Executing a DELETE statement (with a WHERE CURRENT OF clause) will set all fields in the cursor variable to NULL for subsequent reads

Other points to take into account regarding undeclared cursors:

  1. The OPEN, FETCH and CLOSE statements cannot be applied to a cursor surfaced by the AS CURSOR clause

  2. The cursor_name argument associated with an AS CURSOR clause must not clash with any names created by DECLARE VARIABLE or DECLARE CURSOR statements at the top of the module body, nor with any other cursors surfaced by an AS CURSOR clause

  3. The optional FOR UPDATE clause in the SELECT statement is not required for a positioned update

Examples using FOR SELECT

  1. A simple loop through query results:

    CREATE PROCEDURE SHOWNUMS
    RETURNS (
      AA INTEGER,
      BB INTEGER,
      SM INTEGER,
      DF INTEGER)
    AS
    BEGIN
      FOR SELECT DISTINCT A, B
          FROM NUMBERS
        ORDER BY A, B
        INTO AA, BB
      DO
      BEGIN
        SM = AA + BB;
        DF = AA - BB;
        SUSPEND;
      END
    END
  2. Nested FOR SELECT loop:

    CREATE PROCEDURE RELFIELDS
    RETURNS (
      RELATION CHAR(32),
      POS INTEGER,
      FIELD CHAR(32))
    AS
    BEGIN
      FOR SELECT RDB$RELATION_NAME
          FROM RDB$RELATIONS
          ORDER BY 1
          INTO :RELATION
      DO
      BEGIN
        FOR SELECT
              RDB$FIELD_POSITION + 1,
              RDB$FIELD_NAME
            FROM RDB$RELATION_FIELDS
            WHERE
              RDB$RELATION_NAME = :RELATION
            ORDER BY RDB$FIELD_POSITION
            INTO :POS, :FIELD
        DO
        BEGIN
          IF (POS = 2) THEN
            RELATION = ' "';
    
          SUSPEND;
        END
      END
    END
    Tip
    Instead of nesting statements, this is generally better solved by using a single statements with a join.
  3. Using the AS CURSOR clause to surface a cursor for the positioned delete of a record:

    CREATE PROCEDURE DELTOWN (
      TOWNTODELETE VARCHAR(24))
    RETURNS (
      TOWN VARCHAR(24),
      POP INTEGER)
    AS
    BEGIN
      FOR SELECT TOWN, POP
          FROM TOWNS
          INTO :TOWN, :POP AS CURSOR TCUR
      DO
      BEGIN
        IF (:TOWN = :TOWNTODELETE) THEN
          -- Positional delete
          DELETE FROM TOWNS
          WHERE CURRENT OF TCUR;
        ELSE
          SUSPEND;
      END
    END
  4. Using an implicitly declared cursor as a cursor variable

    EXECUTE BLOCK
     RETURNS (o CHAR(63))
    AS
    BEGIN
      FOR SELECT rdb$relation_name AS name
        FROM rdb$relations AS CURSOR c
      DO
      BEGIN
        o = c.name;
        SUSPEND;
      END
    END
  5. Disambiguating cursor variables within queries

    EXECUTE BLOCK
      RETURNS (o1 CHAR(63), o2 CHAR(63))
    AS
    BEGIN
      FOR SELECT rdb$relation_name
        FROM rdb$relations
        WHERE
          rdb$relation_name = 'RDB$RELATIONS' AS CURSOR c
      DO
      BEGIN
        FOR SELECT
            -- with a prefix resolves to the cursor
            :c.rdb$relation_name x1,
            -- no prefix as an alias for the rdb$relations table
            c.rdb$relation_name x2
          FROM rdb$relations c
          WHERE
            rdb$relation_name = 'RDB$DATABASE' AS CURSOR d
        DO
        BEGIN
          o1 = d.x1;
          o2 = d.x2;
          SUSPEND;
        END
      END
    END

FOR EXECUTE STATEMENT

Executes dynamically created SQL statements and loops over its result set

Syntax
[label:]
FOR <execute_statement> DO <compound_statement>
Table 1. FOR EXECUTE STATEMENT Statement Parameters
Argument Description

label

Optional label for LEAVE and CONTINUE.Follows the rules for identifiers.

execute_stmt

An EXECUTE STATEMENT statement

compound_statement

A single statement, or statements wrapped in BEGIN …​ END, that performs all the processing for this FOR loop

The statement FOR EXECUTE STATEMENT is used, in a manner analogous to FOR SELECT, to loop through the result set of a dynamically executed query that returns multiple rows.

FOR EXECUTE STATEMENT Examples

Executing a dynamically constructed SELECT query that returns a data set
CREATE PROCEDURE DynamicSampleThree (
   Q_FIELD_NAME VARCHAR(100),
   Q_TABLE_NAME VARCHAR(100)
) RETURNS(
  LINE VARCHAR(32000)
)
AS
  DECLARE VARIABLE P_ONE_LINE VARCHAR(100);
BEGIN
  LINE = '';
  FOR
    EXECUTE STATEMENT
      'SELECT T1.' || :Q_FIELD_NAME ||
      ' FROM ' || :Q_TABLE_NAME || ' T1 '
    INTO :P_ONE_LINE
  DO
    IF (:P_ONE_LINE IS NOT NULL) THEN
      LINE = :LINE || :P_ONE_LINE || ' ';
  SUSPEND;
END

OPEN

Opens a declared cursor

Syntax
OPEN cursor_name;
Table 1. OPEN Statement Parameter
Argument Description

cursor_name

Cursor name.A cursor with this name must be previously declared with a DECLARE CURSOR statement

An OPEN statement opens a previously declared cursor, executes its declared SELECT statement, and makes the first record of the result data set ready to fetch.OPEN can be applied only to cursors previously declared in a [fblangref50-psql-declare-cursor] statement.

Note

If the SELECT statement of the cursor has parameters, they must be declared as local variables, or input or output parameters before the cursor is declared.When the cursor is opened, the parameter is assigned the current value of the variable.

OPEN Examples

  1. Using the OPEN statement:

    SET TERM ^;
    
    CREATE OR ALTER PROCEDURE GET_RELATIONS_NAMES
    RETURNS (
      RNAME CHAR(63)
    )
    AS
      DECLARE C CURSOR FOR (
        SELECT RDB$RELATION_NAME
        FROM RDB$RELATIONS);
    BEGIN
      OPEN C;
      WHILE (1 = 1) DO
      BEGIN
        FETCH C INTO :RNAME;
        IF (ROW_COUNT = 0) THEN
          LEAVE;
        SUSPEND;
      END
      CLOSE C;
    END^
    
    SET TERM ;^
  2. A collection of scripts for creating views using a PSQL block with named cursors:

    EXECUTE BLOCK
    RETURNS (
      SCRIPT BLOB SUB_TYPE TEXT)
    AS
      DECLARE VARIABLE FIELDS VARCHAR(8191);
      DECLARE VARIABLE FIELD_NAME TYPE OF RDB$FIELD_NAME;
      DECLARE VARIABLE RELATION RDB$RELATION_NAME;
      DECLARE VARIABLE SOURCE TYPE OF COLUMN RDB$RELATIONS.RDB$VIEW_SOURCE;
      -- named cursor
      DECLARE VARIABLE CUR_R CURSOR FOR (
        SELECT
          RDB$RELATION_NAME,
          RDB$VIEW_SOURCE
        FROM
          RDB$RELATIONS
        WHERE
          RDB$VIEW_SOURCE IS NOT NULL);
      -- named cursor with local variable
      DECLARE CUR_F CURSOR FOR (
        SELECT
          RDB$FIELD_NAME
        FROM
          RDB$RELATION_FIELDS
        WHERE
          -- Important! The variable has to be declared earlier
          RDB$RELATION_NAME = :RELATION);
    BEGIN
      OPEN CUR_R;
      WHILE (1 = 1) DO
      BEGIN
        FETCH CUR_R
          INTO :RELATION, :SOURCE;
        IF (ROW_COUNT = 0) THEN
          LEAVE;
    
        FIELDS = NULL;
        -- The CUR_F cursor will use
        -- variable value of RELATION initialized above
        OPEN CUR_F;
        WHILE (1 = 1) DO
        BEGIN
          FETCH CUR_F
            INTO :FIELD_NAME;
          IF (ROW_COUNT = 0) THEN
            LEAVE;
          IF (FIELDS IS NULL) THEN
            FIELDS = TRIM(FIELD_NAME);
          ELSE
            FIELDS = FIELDS || ', ' || TRIM(FIELD_NAME);
        END
        CLOSE CUR_F;
    
        SCRIPT = 'CREATE VIEW ' || RELATION;
    
        IF (FIELDS IS NOT NULL) THEN
          SCRIPT = SCRIPT || ' (' || FIELDS || ')';
    
        SCRIPT = SCRIPT || ' AS ' || ASCII_CHAR(13);
        SCRIPT = SCRIPT || SOURCE;
    
        SUSPEND;
      END
      CLOSE CUR_R;
    END

FETCH

Fetches a record from a cursor

Syntax
FETCH [<fetch_scroll> FROM] cursor_name
  [INTO [:]varname [, [:]varname ...]];

<fetch_scroll> ::=
    NEXT | PRIOR | FIRST | LAST
  | RELATIVE n | ABSOLUTE n
Table 1. FETCH Statement Parameters
Argument Description

cursor_name

Cursor name.A cursor with this name must be previously declared with a DECLARE …​ CURSOR statement and opened by an OPEN statement.

varname

Variable name

n

Integer expression for the number of rows

The FETCH statement fetches the next row from the result set of the cursor and assigns the column values to PSQL variables.The FETCH statement can be used only with a cursor declared with the [fblangref50-psql-declare-cursor] statement.

Using the optional fetch_scroll part of the FETCH statement, you can specify in which direction and how many rows to advance the cursor position.The NEXT fetch option can be used for scrollable and forward-only cursors.Other fetch options are only supported for scrollable cursors.

The Fetch Options
NEXT

moves the cursor one row forward;this is the default

PRIOR

moves the cursor one record back

FIRST

moves the cursor to the first record.

LAST

moves the cursor to the last record

RELATIVE n

moves the cursor n rows from the current position;positive numbers move forward, negative numbers move backwards;using zero (0) will not move the cursor, and ROW_COUNT will be set to zero as no new row was fetched.

ABSOLUTE n

moves the cursor to the specified row;n is an integer expression, where 1 indicates the first row.For negative values, the absolute position is taken from the end of the result set, so -1 indicates the last row, -2 the second to last row, etc.A value of zero (0) will position before the first row.

The optional INTO clause gets data from the current row of the cursor and loads them into PSQL variables.If a fetch moves beyond the bounds of the result set, the variables will be set to NULL.

It is also possible to use the cursor name as a variable of a record type (similar to OLD and NEW in triggers), allowing access to the columns of the result set (i.e. cursor_name.columnname).

Rules for Cursor Variables
  • When accessing a cursor variable in a DML statement, the colon prefix can be added before the cursor name (i.e. :cursor_name.columnname) for disambiguation, similar to variables.

    The cursor variable can be referenced without colon prefix, but in that case, depending on the scope of the contexts in the statement, the name may resolve in the statement context instead of to the cursor (e.g. you select from a table with the same name as the cursor).

  • Cursor variables are read-only

  • In a FOR SELECT statement without an AS CURSOR clause, you must use the INTO clause.If an AS CURSOR clause is specified, the INTO clause is allowed, but optional;you can access the fields through the cursor instead.

  • Reading from a cursor variable returns the current field values.This means that an UPDATE statement (with a WHERE CURRENT OF clause) will update not only the table, but also the fields in the cursor variable for subsequent reads.Executing a DELETE statement (with a WHERE CURRENT OF clause) will set all fields in the cursor variable to NULL for subsequent reads

  • When the cursor is not positioned on a row — it is positioned before the first row, or after the last row — attempts to read from the cursor variable will result in error “Cursor cursor_name is not positioned in a valid record

For checking whether all the rows of the result set have been fetched, the context variable ROW_COUNT returns the number of rows fetched by the statement.If a record was fetched, then ROW_COUNT is one (1), otherwise zero (0).

FETCH Examples

  1. Using the FETCH statement:

    CREATE OR ALTER PROCEDURE GET_RELATIONS_NAMES
      RETURNS (RNAME CHAR(63))
    AS
      DECLARE C CURSOR FOR (
        SELECT RDB$RELATION_NAME
        FROM RDB$RELATIONS);
    BEGIN
      OPEN C;
      WHILE (1 = 1) DO
      BEGIN
        FETCH C INTO RNAME;
        IF (ROW_COUNT = 0) THEN
          LEAVE;
        SUSPEND;
      END
      CLOSE C;
    END
  2. Using the FETCH statement with nested cursors:

    EXECUTE BLOCK
      RETURNS (SCRIPT BLOB SUB_TYPE TEXT)
    AS
      DECLARE VARIABLE FIELDS VARCHAR (8191);
      DECLARE VARIABLE FIELD_NAME TYPE OF RDB$FIELD_NAME;
      DECLARE VARIABLE RELATION RDB$RELATION_NAME;
      DECLARE VARIABLE SRC TYPE OF COLUMN RDB$RELATIONS.RDB$VIEW_SOURCE;
      -- Named cursor declaration
      DECLARE VARIABLE CUR_R CURSOR FOR (
        SELECT
          RDB$RELATION_NAME,
          RDB$VIEW_SOURCE
        FROM RDB$RELATIONS
        WHERE RDB$VIEW_SOURCE IS NOT NULL);
      -- Declaring a named cursor in which
      -- a local variable is used
      DECLARE CUR_F CURSOR FOR (
        SELECT RDB$FIELD_NAME
        FROM RDB$RELATION_FIELDS
        WHERE
        -- the variable must be declared earlier
          RDB$RELATION_NAME =: RELATION);
    BEGIN
      OPEN CUR_R;
      WHILE (1 = 1) DO
      BEGIN
        FETCH CUR_R INTO RELATION, SRC;
        IF (ROW_COUNT = 0) THEN
          LEAVE;
        FIELDS = NULL;
        -- Cursor CUR_F will use the value
        -- the RELATION variable initialized above
        OPEN CUR_F;
        WHILE (1 = 1) DO
        BEGIN
          FETCH CUR_F INTO FIELD_NAME;
          IF (ROW_COUNT = 0) THEN
            LEAVE;
          IF (FIELDS IS NULL) THEN
            FIELDS = TRIM (FIELD_NAME);
          ELSE
            FIELDS = FIELDS || ',' || TRIM(FIELD_NAME);
        END
        CLOSE CUR_F;
        SCRIPT = 'CREATE VIEW' || RELATION;
        IF (FIELDS IS NOT NULL) THEN
          SCRIPT = SCRIPT || '(' || FIELDS || ')' ;
        SCRIPT = SCRIPT || 'AS' || ASCII_CHAR (13);
        SCRIPT = SCRIPT || SRC;
        SUSPEND;
      END
      CLOSE CUR_R;
    EN
  3. An example of using the FETCH statement with a scrollable cursor

EXECUTE BLOCK
  RETURNS (N INT, RNAME CHAR (63))
AS
  DECLARE C SCROLL CURSOR FOR (
    SELECT
      ROW_NUMBER() OVER (ORDER BY RDB$RELATION_NAME) AS N,
      RDB$RELATION_NAME
    FROM RDB$RELATIONS
    ORDER BY RDB$RELATION_NAME);
BEGIN
  OPEN C;
  -- move to the first record (N = 1)
  FETCH FIRST FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  -- move 1 record forward (N = 2)
  FETCH NEXT FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  -- move to the fifth record (N = 5)
  FETCH ABSOLUTE 5 FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  -- move 1 record backward (N = 4)
  FETCH PRIOR FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  -- move 3 records forward (N = 7)
  FETCH RELATIVE 3 FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  -- move back 5 records (N = 2)
  FETCH RELATIVE -5 FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  -- move to the first record (N = 1)
  FETCH FIRST FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  -- move to the last entry
  FETCH LAST FROM C;
  RNAME = C.RDB$RELATION_NAME;
  N = C.N;
  SUSPEND;
  CLOSE C;
END

Management Statements in PSQL

Management statement are allowed in PSQL modules (triggers, procedures, functions and PSQL blocks), which is especially helpful for applications that need management statements to be executed at the start of a session, specifically in ON CONNECT triggers.

The management statements permitted in PSQL are:

Example of Management Statements in PSQL

create or alter trigger on_connect on connect
as
begin
    set bind of decfloat to double precision;
    set time zone 'America/Sao_Paulo';
end
Caution

Although useful as a workaround, using ON CONNECT triggers to configure bind and time zone is usually not the right approach.Alternatives are handling this through DefaultTimeZone in firebird.conf and DataTypeCompatibility in firebird.conf or databases.conf, or isc_dpb_session_time_zone or isc_dpb_set_bind in the DPB.

CLOSE

Closes a declared cursor

Syntax
CLOSE cursor_name;
Table 1. CLOSE Statement Parameter
Argument Description

cursor_name

Cursor name.A cursor with this name must be previously declared with a DECLARE …​ CURSOR statement and opened by an OPEN statement

A CLOSE statement closes an open cursor.Only a cursor that was declared with [fblangref50-psql-declare-cursor] can be closed with a CLOSE statement.Any cursors that are still open will be automatically closed after the module code completes execution.

IN AUTONOMOUS TRANSACTION

Executes a statement or a block of statements in an autonomous transaction

Syntax
IN AUTONOMOUS TRANSACTION DO <compound_statement>
Table 1. IN AUTONOMOUS TRANSACTION Statement Parameter
Argument Description

compound_statement

A single statement, or statements wrapped in BEGIN …​ END

The IN AUTONOMOUS TRANSACTION statement enables execution of a statement or a block of statements in an autonomous transaction.Code running in an autonomous transaction will be committed right after its successful execution, regardless of the status of its parent transaction.This can be used when certain operations must not be rolled back, even if an error occurs in the parent transaction.

An autonomous transaction has the same isolation level as its parent transaction.Any exception that is thrown in the block of the autonomous transaction code will result in the autonomous transaction being rolled back and all changes made will be undone.If the code executes successfully, the autonomous transaction will be committed.

IN AUTONOMOUS TRANSACTION Examples

Using an autonomous transaction in a trigger for the database ON CONNECT event, to log all connection attempts, including those that failed:

CREATE TRIGGER TR_CONNECT ON CONNECT
AS
BEGIN
  -- Logging all attempts to connect to the database
  IN AUTONOMOUS TRANSACTION DO
    INSERT INTO LOG(MSG)
    VALUES ('USER ' || CURRENT_USER || ' CONNECTS.');
  IF (EXISTS(SELECT *
             FROM BLOCKED_USERS
             WHERE USERNAME = CURRENT_USER)) THEN
  BEGIN
    -- Logging that the attempt to connect
    -- to the database failed and sending
    -- a message about the event
    IN AUTONOMOUS TRANSACTION DO
    BEGIN
      INSERT INTO LOG(MSG)
      VALUES ('USER ' || CURRENT_USER || ' REFUSED.');
      POST_EVENT 'CONNECTION ATTEMPT BY BLOCKED USER!';
    END
    -- now calling an exception
    EXCEPTION EX_BADUSER;
  END
END

POST_EVENT

Posts an event for notification to registered clients on commit

Syntax
POST_EVENT event_name;
Table 1. POST_EVENT Statement Parameter
Argument Description

event_name

Event name (message) limited to 127 bytes

The POST_EVENT statement notifies the event manager about the event, which saves it to an event table.When the transaction is committed, the event manager notifies applications that have registered their interest in the event.

The event name can be a code, or a short message: the choice is open as it is a string of up to 127 bytes.Keep in mind that the application listening for an event must use the exact event name when registering.

The content of the string can be a string literal, a variable or any valid SQL expression that resolves to a string.

POST_EVENT Examples

Notifying the listening applications about inserting a record into the SALES table:

CREATE TRIGGER POST_NEW_ORDER FOR SALES
ACTIVE AFTER INSERT POSITION 0
AS
BEGIN
  POST_EVENT 'new_order';
END

RETURN

Returns a value from a stored function

Syntax
RETURN value;
Table 1. RETURN Statement Parameter
Argument Description

value

Expression with the value to return;Can be any expression type-compatible with the return type of the function

The RETURN statement ends the execution of a function and returns the value of the expression value.

RETURN can only be used in PSQL functions (stored functions and local sub-functions).

DECLARE VARIABLE

Declares a local variable

Syntax
DECLARE [VARIABLE] varname
  <domain_or_non_array_type> [NOT NULL] [COLLATE collation]
  [{DEFAULT | = } <initvalue>];

<domain_or_non_array_type> ::=
  !! See Scalar Data Types Syntax !!

<initvalue> ::= <literal> | <context_var>
Table 1. DECLARE VARIABLE Statement Parameters
Argument Description

varname

Name of the local variable

collation

Collation

initvalue

Initial value for this variable

literal

Literal of a type compatible with the type of the local variable

context_var

Any context variable whose type is compatible with the type of the local variable

The statement DECLARE [VARIABLE] is used for declaring a local variable.One DECLARE [VARIABLE] statement is required for each local variable.Any number of DECLARE [VARIABLE] statements can be included and in any order.The name of a local variable must be unique among the names of local variables and input and output parameters declared for the module.

A special case of DECLARE [VARIABLE] — declaring cursors — is covered separately in [fblangref50-psql-declare-cursor]

Data Type for Variables

A local variable can be of any SQL type other than an array.

  • A domain name can be specified as the type;the variable will inherit all of its attributes.

  • If the TYPE OF domain clause is used instead, the variable will inherit only the domain’s data type, and, if applicable, its character set and collation attributes.Any default value or constraints such as NOT NULL or CHECK constraints are not inherited.

  • If the TYPE OF COLUMN relation.column option is used to “borrow” from a column in a table or view, the variable will inherit only the column’s data type, and, if applicable, its character set and collation attributes.Any other attributes are ignored.

NOT NULL Constraint

For local variables, you can specify the NOT NULL constraint, disallowing NULL values for the variable.If a domain has been specified as the data type and the domain already has the NOT NULL constraint, the declaration is unnecessary.For other forms, including use of a domain that is nullable, the NOT NULL constraint can be included if needed.

CHARACTER SET and COLLATE clauses

Unless specified, the character set and collation of a string variable will be the database defaults.A CHARACTER SET clause can be specified to handle string data that needs a different character set.A valid collation (COLLATE clause) can also be included, with or without the character set clause.

Initializing a Variable

Local variables are NULL when execution of the module begins.They can be explicitly initialized so that a starting or default value is available when they are first referenced.The initial value can be specified in two ways, DEFAULT <initvalue> and = <initvalue>.The value can be any type-compatible literal or context variable, including NULL.

Tip

Be sure to use this clause for any variables that have a NOT NULL constraint and do not otherwise have a default value available (i.e. inherited from a domain).

Examples of various ways to declare local variables

CREATE OR ALTER PROCEDURE SOME_PROC
AS
  -- Declaring a variable of the INT type
  DECLARE I INT;
  -- Declaring a variable of the INT type that does not allow NULL
  DECLARE VARIABLE J INT NOT NULL;
  -- Declaring a variable of the INT type with the default value of 0
  DECLARE VARIABLE K INT DEFAULT 0;
  -- Declaring a variable of the INT type with the default value of 1
  DECLARE VARIABLE L INT = 1;
  -- Declaring a variable based on the COUNTRYNAME domain
  DECLARE FARM_COUNTRY COUNTRYNAME;
  -- Declaring a variable of the type equal to the COUNTRYNAME domain
  DECLARE FROM_COUNTRY TYPE OF COUNTRYNAME;
  -- Declaring a variable with the type of the CAPITAL column in the COUNTRY table
  DECLARE CAPITAL TYPE OF COLUMN COUNTRY.CAPITAL;
BEGIN
  /* PSQL statements */
END

DECLARE .. CURSOR

Declares a named cursor

Syntax
DECLARE [VARIABLE] cursor_name
  [[NO] SCROLL] CURSOR
  FOR (<select>);
Table 1. DECLARE …​ CURSOR Statement Parameters
Argument Description

cursor_name

Cursor name

select

SELECT statement

The DECLARE …​ CURSOR …​ FOR statement binds a named cursor to the result set obtained by the SELECT statement specified in the FOR clause.In the body code, the cursor can be opened, used to iterate row-by-row through the result set, and closed.While the cursor is open, the code can perform positioned updates and deletes using the WHERE CURRENT OF in the UPDATE or DELETE statement.

Note

Syntactically, the DECLARE …​ CURSOR statement is a special case of [fblangref50-psql-declare-variable].

Forward-Only and Scrollable Cursors

The cursor can be forward-only (unidirectional) or scrollable.The optional clause SCROLL makes the cursor scrollable, the NO SCROLL clause, forward-only.By default, cursors are forward-only.

Forward-only cursors can — as the name implies — only move forward in the dataset.Forward-only cursors only support the FETCH [NEXT FROM] statement, other fetch options raise an error.Scrollable cursors allow you to move not only forward in the dataset, but also back, as well as N positions relative to the current position.

Warning

Scrollable cursors are materialized as a temporary dataset, as such, they consume additional memory or disk space, so use them only when you really need them.

Cursor Idiosyncrasies

  • The optional FOR UPDATE clause can be included in the SELECT statement, but its absence does not prevent successful execution of a positioned update or delete

  • Care should be taken to ensure that the names of declared cursors do not conflict with any names used subsequently in statements for AS CURSOR clauses

  • If the cursor is needed only to walk the result set, it is nearly always easier and less error-prone to use a FOR SELECT statement with the AS CURSOR clause.Declared cursors must be explicitly opened, used to fetch data, and closed.The context variable ROW_COUNT has to be checked after each fetch and, if its value is zero, the loop has to be terminated.A FOR SELECT statement does this automatically.

    Nevertheless, declared cursors provide a high level of control over sequential events and allow several cursors to be managed in parallel.

  • The SELECT statement may contain parameters. For instance:

    SELECT NAME || :SFX FROM NAMES WHERE NUMBER = :NUM

    Each parameter has to have been declared beforehand as a PSQL variable, or as input or output parameters.When the cursor is opened, the parameter is assigned the current value of the variable.

Warning
Unstable Variables and Cursors

If the value of the PSQL variable used in the SELECT statement of the cursor changes during the execution of the loop, then its new value may — but not always — be used when selecting the next rows.It is better to avoid such situations.If you really need this behaviour, then you should thoroughly test your code and make sure you understand how changes to the variable affect the query results.

Note particularly that the behaviour may depend on the query plan, specifically on the indexes being used.Currently, there are no strict rules for this behaviour, and this may change in future versions of Firebird.

Examples Using Named Cursors

  1. Declaring a named cursor in a trigger.

    CREATE OR ALTER TRIGGER TBU_STOCK
      BEFORE UPDATE ON STOCK
    AS
      DECLARE C_COUNTRY CURSOR FOR (
        SELECT
          COUNTRY,
          CAPITAL
        FROM COUNTRY
      );
    BEGIN
      /* PSQL statements */
    END
  2. Declaring a scrollable cursor

    EXECUTE BLOCK
      RETURNS (
        N INT,
        RNAME CHAR(63))
    AS
      - Declaring a scrollable cursor
      DECLARE C SCROLL CURSOR FOR (
        SELECT
          ROW_NUMBER() OVER (ORDER BY RDB$RELATION_NAME) AS N,
          RDB$RELATION_NAME
        FROM RDB$RELATIONS
        ORDER BY RDB$RELATION_NAME);
    BEGIN
      / * PSQL statements * /
    END
  3. A collection of scripts for creating views with a PSQL block using named cursors.

    EXECUTE BLOCK
    RETURNS (
      SCRIPT BLOB SUB_TYPE TEXT)
    AS
      DECLARE VARIABLE FIELDS VARCHAR(8191);
      DECLARE VARIABLE FIELD_NAME TYPE OF RDB$FIELD_NAME;
      DECLARE VARIABLE RELATION RDB$RELATION_NAME;
      DECLARE VARIABLE SOURCE TYPE OF COLUMN RDB$RELATIONS.RDB$VIEW_SOURCE;
      DECLARE VARIABLE CUR_R CURSOR FOR (
        SELECT
          RDB$RELATION_NAME,
          RDB$VIEW_SOURCE
        FROM
          RDB$RELATIONS
        WHERE
          RDB$VIEW_SOURCE IS NOT NULL);
      -- Declaring a named cursor where
      -- a local variable is used
      DECLARE CUR_F CURSOR FOR (
        SELECT
          RDB$FIELD_NAME
        FROM
          RDB$RELATION_FIELDS
        WHERE
          -- the variable must be declared earlier
          RDB$RELATION_NAME = :RELATION);
    BEGIN
      OPEN CUR_R;
      WHILE (1 = 1) DO
      BEGIN
        FETCH CUR_R
        INTO :RELATION, :SOURCE;
        IF (ROW_COUNT = 0) THEN
          LEAVE;
    
        FIELDS = NULL;
        -- The CUR_F cursor will use the value
        -- of the RELATION variable initiated above
        OPEN CUR_F;
        WHILE (1 = 1) DO
        BEGIN
          FETCH CUR_F
          INTO :FIELD_NAME;
          IF (ROW_COUNT = 0) THEN
            LEAVE;
          IF (FIELDS IS NULL) THEN
            FIELDS = TRIM(FIELD_NAME);
          ELSE
            FIELDS = FIELDS || ', ' || TRIM(FIELD_NAME);
        END
        CLOSE CUR_F;
    
        SCRIPT = 'CREATE VIEW ' || RELATION;
    
        IF (FIELDS IS NOT NULL) THEN
          SCRIPT = SCRIPT || ' (' || FIELDS || ')';
    
        SCRIPT = SCRIPT || ' AS ' || ASCII_CHAR(13);
        SCRIPT = SCRIPT || SOURCE;
    
        SUSPEND;
      END
      CLOSE CUR_R;
    END

DECLARE FUNCTION

Declares a sub-function

Syntax
<subfunc-forward> ::= <subfunc-header>;

<subfunc-def> ::= <subfunc-header> <psql-module-body>

<subfunc-header>  ::=
  DECLARE FUNCTION subfuncname [ ( [ <in_params> ] ) ]
  RETURNS <domain_or_non_array_type> [COLLATE collation]
  [DETERMINISTIC]

<in_params> ::=
  !! See CREATE FUNCTION Syntax !!

<domain_or_non_array_type> ::=
  !! See Scalar Data Types Syntax !!

<psql-module-body> ::=
  !! See Syntax of Module Body !!
Table 1. DECLARE FUNCTION Statement Parameters
Argument Description

subfuncname

Sub-function name

collation

Collation name

The DECLARE FUNCTION statement declares a sub-function.A sub-function is only visible to the PSQL module that defined the sub-function.

A sub-function can use variables, but not cursors, from its parent module.It can access other routines from its parent modules, including recursive calls to itself.

Sub-functions have a number of restrictions:

  • A sub-function cannot be nested in another subroutine.Subroutines are only supported in top-level PSQL modules (stored procedures, stored functions, triggers and PSQL blocks).This restriction is not enforced by the syntax, but attempts to create nested sub-functions will raise an error “feature is not supported” with detail message “nested sub function”.

  • Currently, a sub-function has no direct access to use cursors from its parent module.

A sub-function can be forward declared to resolve mutual dependencies between subroutines, and must be followed by its actual definition.When a sub-function is forward declared and has parameters with default values, the default values should only be specified in the forward declaration, and should not be repeated in subfunc_def.

Note

Declaring a sub-function with the same name as a stored function will hide that stored function from your module.It will not be possible to call that stored function.

Note

Contrary to DECLARE [VARIABLE], a DECLARE FUNCTION is not terminated by a semicolon.The END of its main BEGIN …​ END block is considered its terminator.

Examples of Sub-Functions

  1. Sub-function within a stored function

    CREATE OR ALTER FUNCTION FUNC1 (n1 INTEGER, n2 INTEGER)
      RETURNS INTEGER
    AS
    - Subfunction
      DECLARE FUNCTION SUBFUNC (n1 INTEGER, n2 INTEGER)
        RETURNS INTEGER
      AS
      BEGIN
        RETURN n1 + n2;
      END
    BEGIN
      RETURN SUBFUNC (n1, n2);
    END
  2. Recursive function call

    execute block returns (i integer, o integer)
    as
        -- Recursive function without forward declaration.
        declare function fibonacci(n integer) returns integer
        as
        begin
          if (n = 0 or n = 1) then
           return n;
         else
           return fibonacci(n - 1) + fibonacci(n - 2);
        end
    begin
      i = 0;
    
      while (i < 10)
      do
      begin
        o = fibonacci(i);
        suspend;
        i = i + 1;
      end
    end

DECLARE PROCEDURE

Declares a sub-procedure

Syntax
<subproc-forward> ::= <subproc-header>;

<subproc-def> ::= <subproc-header> <psql-module-body>

<subproc-header>  ::=
DECLARE subprocname [ ( [ <in_params> ] ) ]
  [RETURNS (<out_params>)]

<in_params> ::=
  !! See CREATE PROCEDURE Syntax !!

<domain_or_non_array_type> ::=
  !! See Scalar Data Types Syntax !!

<psql-module-body> ::=
  !! See Syntax of Module Body !!
Table 1. DECLARE PROCEDURE Statement Parameters
Argument Description

subprocname

Sub-procedure name

collation

Collation name

The DECLARE PROCEDURE statement declares a sub-procedure.A sub-procedure is only visible to the PSQL module that defined the sub-procedure.

A sub-procedure can use variables, but not cursors, from its parent module.It can access other routines from its parent modules.

Sub-procedures have a number of restrictions:

  • A sub-procedure cannot be nested in another subroutine.Subroutines are only supported in top-level PSQL modules (stored procedures, stored functions, triggers and PSQL blocks).This restriction is not enforced by the syntax, but attempts to create nested sub-procedures will raise an error “feature is not supported” with detail message “nested sub procedure”.

  • Currently, the sub-procedure has no direct access to use cursors from its parent module.

A sub-procedure can be forward declared to resolve mutual dependencies between subroutines, and must be followed by its actual definition.When a sub-procedure is forward declared and has parameters with default values, the default values should only be specified in the forward declaration, and should not be repeated in subproc_def.

Note

Declaring a sub-procedure with the same name as a stored procedure, table or view will hide that stored procedure, table or view from your module.It will not be possible to call that stored procedure, table or view.

Note

Contrary to DECLARE [VARIABLE], a DECLARE PROCEDURE is not terminated by a semicolon.The END of its main BEGIN …​ END block is considered its terminator.

Examples of Sub-Procedures

  1. Subroutines in EXECUTE BLOCK

    EXECUTE BLOCK
      RETURNS (name VARCHAR(63))
    AS
      -- Sub-procedure returning a list of tables
      DECLARE PROCEDURE get_tables
        RETURNS (table_name VARCHAR(63))
      AS
      BEGIN
        FOR SELECT RDB$RELATION_NAME
          FROM RDB$RELATIONS
          WHERE RDB$VIEW_BLR IS NULL
          INTO table_name
        DO SUSPEND;
      END
      -- Sub-procedure returning a list of views
      DECLARE PROCEDURE get_views
        RETURNS (view_name VARCHAR(63))
      AS
      BEGIN
        FOR SELECT RDB$RELATION_NAME
          FROM RDB$RELATIONS
          WHERE RDB$VIEW_BLR IS NOT NULL
          INTO view_name
        DO SUSPEND;
      END
    BEGIN
      FOR SELECT table_name
        FROM get_tables
        UNION ALL
        SELECT view_name
        FROM get_views
        INTO name
      DO SUSPEND;
    END
  2. With forward declaration and parameter with default value

    execute block returns (o integer)
    as
        -- Forward declaration of P1.
        declare procedure p1(i integer = 1) returns (o integer);
    
        -- Forward declaration of P2.
        declare procedure p2(i integer) returns (o integer);
    
        -- Implementation of P1 should not re-declare parameter default value.
        declare procedure p1(i integer) returns (o integer)
        as
        begin
            execute procedure p2(i) returning_values o;
        end
    
        declare procedure p2(i integer) returns (o integer)
        as
        begin
            o = i;
        end
    begin
        execute procedure p1 returning_values o;
        suspend;
    end

BEGIN …​ END

Delimits a block of statements

Syntax
<block> ::=
  BEGIN
    [<compound_statement> ...]
  END

<compound_statement> ::= {<block> | <statement>}

The BEGIN …​ END construct is a two-part statement that wraps a block of statements that are executed as one unit of code.Each block starts with the keyword BEGIN and ends with the keyword END.Blocks can be nested a maximum depth of 512 nested blocks.A block can be empty, allowing them to act as stubs, without the need to write dummy statements.

The BEGIN …​ END itself should not be followed by a statement terminator (semicolon).However, when defining or altering a PSQL module in the isql utility, that application requires that the last END statement be followed by its own terminator character, that was previously switched — using SET TERM — to a string other than a semicolon.That terminator is not part of the PSQL syntax.

The final, or outermost, END statement in a trigger terminates the trigger.What the final END statement does in a stored procedure depends on the type of procedure:

  • In a selectable procedure, the final END statement returns control to the caller, returning SQLCODE 100, indicating that there are no more rows to retrieve

  • In an executable procedure, the final END statement returns control to the caller, along with the current values of any output parameters defined.

BEGIN …​ END Examples

A sample procedure from the employee.fdb database, showing simple usage of BEGIN …​ END blocks:
SET TERM ^;
CREATE OR ALTER PROCEDURE DEPT_BUDGET (
  DNO CHAR(3))
RETURNS (
  TOT DECIMAL(12,2))
AS
  DECLARE VARIABLE SUMB DECIMAL(12,2);
  DECLARE VARIABLE RDNO CHAR(3);
  DECLARE VARIABLE CNT  INTEGER;
BEGIN
  TOT = 0;

  SELECT BUDGET
  FROM DEPARTMENT
  WHERE DEPT_NO = :DNO
  INTO :TOT;

  SELECT COUNT(BUDGET)
  FROM DEPARTMENT
  WHERE HEAD_DEPT = :DNO
  INTO :CNT;

  IF (CNT = 0) THEN
    SUSPEND;

  FOR SELECT DEPT_NO
    FROM DEPARTMENT
    WHERE HEAD_DEPT = :DNO
    INTO :RDNO
  DO
  BEGIN
    EXECUTE PROCEDURE DEPT_BUDGET(:RDNO)
      RETURNING_VALUES :SUMB;
    TOT = TOT + SUMB;
  END

  SUSPEND;
END^
SET TERM ;^

IF …​ THEN …​ ELSE

Conditional branching

Syntax
IF (<condition>)
  THEN <compound_statement>
  [ELSE <compound_statement>]
Table 1. IF …​ THEN …​ ELSE Parameters
Argument Description

condition

A logical condition returning TRUE, FALSE or UNKNOWN

compound_statement

A single statement, or statements wrapped in BEGIN …​ END

The conditional branch statement IF …​ THEN is used to branch the execution process in a PSQL module.The condition is always enclosed in parentheses.If the condition returns the value TRUE, execution branches to the statement or the block of statements after the keyword THEN.If an ELSE is present, and the condition returns FALSE or UNKNOWN, execution branches to the statement or the block of statements after it.

Multi-Branch Decisions

PSQL does not provide more advanced multi-branch jumps, such as CASE or SWITCH.However, it is possible to chain IF …​ THEN …​ ELSE statements, see the example section below.Alternatively, the CASE statement from DSQL is available in PSQL and is able to satisfy at least some use cases in the manner of a switch:

CASE <test_expr>
  WHEN <expr> THEN <result>
  [WHEN <expr> THEN <result> ...]
  [ELSE <defaultresult>]
END

CASE
  WHEN <bool_expr> THEN <result>
  [WHEN <bool_expr> THEN <result> ...]
  [ELSE <defaultresult>]
END
Example in PSQL
...
C = CASE
      WHEN A=2 THEN 1
      WHEN A=1 THEN 3
      ELSE 0
    END;
...

IF Examples

  1. An example using the IF statement.Assume that the variables FIRST, LINE2 and LAST were declared earlier.

    ...
    IF (FIRST IS NOT NULL) THEN
      LINE2 = FIRST || ' ' || LAST;
    ELSE
      LINE2 = LAST;
    ...
  2. Given IF …​ THEN …​ ELSE is a statement, it is possible to chain them together.Assume that the INT_VALUE and STRING_VALUE variables were declared earlier.

    IF (INT_VALUE = 1) THEN
      STRING_VALUE = 'one';
    ELSE IF (INT_VALUE = 2) THEN
      STRING_VALUE = 'two';
    ELSE IF (INT_VALUE = 3) THEN
      STRING_VALUE = 'three';
    ELSE
      STRING_VALUE = 'too much';

    This specific example can be replaced with a simple CASE or the DECODE function.

WHILE …​ DO

Looping construct

Syntax
[label:]
WHILE (<condition>) DO
  <compound_statement>
Table 1. WHILE …​ DO Parameters
Argument Description

label

Optional label for LEAVE and CONTINUE.Follows the rules for identifiers.

condition

A logical condition returning TRUE, FALSE or UNKNOWN

compound_statement

A single statement, or statements wrapped in BEGIN …​ END

A WHILE statement implements the looping construct in PSQL.The statement or the block of statements will be executed as long as the condition returns TRUE.Loops can be nested to any depth.

WHILE …​ DO Examples

A procedure calculating the sum of numbers from 1 to I shows how the looping construct is used.

CREATE PROCEDURE SUM_INT (I INTEGER)
RETURNS (S INTEGER)
AS
BEGIN
  s = 0;
  WHILE (i > 0) DO
  BEGIN
    s = s + i;
    i = i - 1;
  END
END

Executing the procedure in isql:

EXECUTE PROCEDURE SUM_INT(4);

the result is:

S
==========
10

Trapping and Handling Errors

Firebird has a useful lexicon of PSQL statements and resources for trapping errors in modules and for handling them.Firebird uses built-in exceptions that are raised for errors occurring when working DML and DDL statements.

In PSQL code, exceptions are handled by means of the WHEN statement.Handling an exception in the code involves either fixing the problem in situ, or stepping past it;either solution allows execution to continue without returning an exception message to the client.

An exception results in execution being terminated in the current block.Instead of passing the execution to the END statement, the procedure moves outward through levels of nested blocks, starting from the block where the exception is caught, searching for the code of the handler that “knows” about this exception.It stops searching when it finds the first WHEN statement that can handle this exception.

System Exceptions

An exception is a message that is generated when an error occurs.

All exceptions handled by Firebird have predefined numeric values for context variables (symbols) and text messages associated with them.Error messages are output in English by default.Localized Firebird builds are available, where error messages are translated into other languages.

Complete listings of the system exceptions can be found in [fblangref50-appx02-errorcodes]:

Custom Exceptions

Custom exceptions can be declared in the database as persistent objects and called in PSQL code to signal specific errors;for example, to enforce certain business rules.A custom exception consists of an identifier, and a default message of 1021 bytes.For details, see CREATE EXCEPTION.

EXCEPTION

Throws a user-defined exception or rethrows an exception

Syntax
EXCEPTION [
    exception_name
    [ custom_message
    | USING (<value_list>)]
  ]

<value_list> ::= <val> [, <val> ...]
Table 1. EXCEPTION Statement Parameters
Argument Description

exception_name

Exception name

custom_message

Alternative message text to be returned to the caller interface when an exception is thrown.Maximum length of the text message is 1,021 bytes

val

Value expression that replaces parameter slots in the exception message text

The EXCEPTION statement with exception_name throws the user-defined exception with the specified name.An alternative message text of up to 1,021 bytes can optionally override the exception’s default message text.

The default exception message can contain slots for parameters that can be filled when throwing an exception.To pass parameter values to an exception, use the USING clause.Considering, in left-to-right order, each parameter passed in the exception-raising statement as “the Nth”, with N starting at 1:

  • If the Nth parameter is not passed, its slot is not replaced

  • If a NULL parameter is passed, the slot will be replaced with the string “*** null ***

  • If more parameters are passed than are defined in the exception message, the surplus ones are ignored

  • The maximum number of parameters is 9

  • The maximum message length, including parameter values, is 1053 bytes

Note

The status vector is generated this code combination isc_except, <exception number>, isc_formatted_exception, <formatted exception message>, <exception parameters>.

The error code used (isc_formatted_exception) was introduced in Firebird 3.0, so the client must be at least version 3.0, or at least use the firebird.msg from version 3.0 or higher, to translate the status vector to a string.

Warning

If the message contains a parameter slot number that is greater than 9, the second and subsequent digits will be treated as literal text.For example @10 will be interpreted as slot 1 followed by a literal ‘0’.

As an example:

CREATE EXCEPTION ex1
  'something wrong in @1@2@3@4@5@6@7@8@9@10@11';
SET TERM ^;
EXECUTE BLOCK AS
BEGIN
  EXCEPTION ex1 USING ('a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i');
END^

This will produce the following output

Statement failed, SQLSTATE = HY000
exception 1
-EX1
-something wrong in abcdefghia0a1

Exceptions can be handled in a [fblangref50-psql-when] statement.If an exception is not handled in a module, then the effects of the actions executed inside this module are cancelled, and the caller program receives the exception (either the default text, or the custom text).

Within the exception-handling block — and only within it — the caught exception can be re-thrown by executing the EXCEPTION statement without parameters.If located outside the block, the re-thrown EXCEPTION call has no effect.

Custom exceptions are stored in the system table RDB$EXCEPTIONS.

EXCEPTION Examples

  1. Throwing an exception upon a condition in the SHIP_ORDER stored procedure:

    CREATE OR ALTER PROCEDURE SHIP_ORDER (
      PO_NUM CHAR(8))
    AS
      DECLARE VARIABLE ord_stat  CHAR(7);
      DECLARE VARIABLE hold_stat CHAR(1);
      DECLARE VARIABLE cust_no   INTEGER;
      DECLARE VARIABLE any_po    CHAR(8);
    BEGIN
      SELECT
        s.order_status,
        c.on_hold,
        c.cust_no
      FROM
        sales s, customer c
      WHERE
        po_number = :po_num AND
        s.cust_no = c.cust_no
      INTO :ord_stat,
           :hold_stat,
           :cust_no;
    
      IF (ord_stat = 'shipped') THEN
        EXCEPTION order_already_shipped;
      /* Other statements */
    END
  2. Throwing an exception upon a condition and replacing the original message with an alternative message:

    CREATE OR ALTER PROCEDURE SHIP_ORDER (
      PO_NUM CHAR(8))
    AS
      DECLARE VARIABLE ord_stat  CHAR(7);
      DECLARE VARIABLE hold_stat CHAR(1);
      DECLARE VARIABLE cust_no   INTEGER;
      DECLARE VARIABLE any_po    CHAR(8);
    BEGIN
      SELECT
        s.order_status,
        c.on_hold,
        c.cust_no
      FROM
        sales s, customer c
      WHERE
        po_number = :po_num AND
        s.cust_no = c.cust_no
      INTO :ord_stat,
           :hold_stat,
           :cust_no;
    
      IF (ord_stat = 'shipped') THEN
        EXCEPTION order_already_shipped
          'Order status is "' || ord_stat || '"';
      /* Other statements */
    END
  3. Using a parameterized exception:

    CREATE EXCEPTION EX_BAD_SP_NAME
      'Name of procedures must start with' '@ 1' ':' '@ 2' '' ;
    ...
    CREATE TRIGGER TRG_SP_CREATE BEFORE CREATE PROCEDURE
    AS
      DECLARE SP_NAME VARCHAR(255);
    BEGIN
      SP_NAME = RDB$GET_CONTEXT ('DDL_TRIGGER' , 'OBJECT_NAME');
      IF (SP_NAME NOT STARTING 'SP_') THEN
        EXCEPTION EX_BAD_SP_NAME USING ('SP_', SP_NAME);
    END
  4. Logging an error and re-throwing it in the WHEN block:

    CREATE PROCEDURE ADD_COUNTRY (
      ACountryName COUNTRYNAME,
      ACurrency VARCHAR(10))
    AS
    BEGIN
      INSERT INTO country (country,
                           currency)
      VALUES (:ACountryName,
              :ACurrency);
      WHEN ANY DO
      BEGIN
        -- write an error in log
        IN AUTONOMOUS TRANSACTION DO
          INSERT INTO ERROR_LOG (PSQL_MODULE,
                                 GDS_CODE,
                                 SQL_CODE,
                                 SQL_STATE)
          VALUES ('ADD_COUNTRY',
                  GDSCODE,
                  SQLCODE,
                  SQLSTATE);
        -- Re-throw exception
        EXCEPTION;
      END
    END

WHEN …​ DO

Catches an exception for error handling

Syntax
WHEN {<error> [, <error> ...] | ANY}
DO <compound_statement>

<error> ::=
  { EXCEPTION exception_name
  | SQLCODE number
  | GDSCODE errcode
  | SQLSTATE sqlstate_code }
Table 1. WHEN …​ DO Statement Parameters
Argument Description

exception_name

Exception name

number

SQLCODE error code

errcode

Symbolic GDSCODE error name

sqlstate_code

String literal with the SQLSTATE error code

compound_statement

A single statement, or a block of statements

The WHEN …​ DO statement handles Firebird errors and user-defined exceptions.The statement catches all errors and user-defined exceptions listed after the keyword WHEN keyword.If WHEN is followed by the keyword ANY, the statement catches any error or user-defined exception, even if they have already been handled in a WHEN block located higher up.

The WHEN …​ DO statements must be located at the end of a block of statements, before the block’s END statement, and after any other statement.

The keyword DO is followed by a single statement, or statements wrapped in a BEGIN …​ END block, that handles the exception.The SQLCODE, GDSCODE, and SQLSTATE context variables are available in the context of this statement or block.Use the RDB$ERROR function to obtain the SQLCODE, GDSCODE, SQLSTATE, custom exception name and exception message.The EXCEPTION statement, without parameters, can also be used in this context to re-throw the error or exception.

Targeting GDSCODE

The argument for the WHEN GDSCODE clause is the symbolic name associated with the internally-defined exception, such as grant_obj_notfound for GDS error 335544551.

In a statement or block of statements of the DO clause, a GDSCODE context variable, containing the numeric code, becomes available.That numeric code is required if you want to compare a GDSCODE exception with a targeted error.To compare it with a specific error, you need to use a numeric values, for example 335544551 for grant_obj_notfound.

Similar context variables are available for SQLCODE and SQLSTATE.

The WHEN …​ DO statement or block is only executed when one of the events targeted by its conditions occurs at run-time.If the WHEN …​ DO statement is executed, even if it does nothing, execution will continue as if no error occurred: the error or user-defined exception neither terminates nor rolls back the operations of the trigger or stored procedure.

However, if the WHEN …​ DO statement or block does nothing to handle or resolve the error, the DML statement (SELECT, INSERT, UPDATE, DELETE, MERGE) that caused the error will be rolled back and none of the statements below it in the same block of statements are executed.

Important
  1. If the error is not caused by one of the DML statements (SELECT, INSERT, UPDATE, DELETE, MERGE), the entire block of statements will be rolled back, not only the one that caused an error.Any operations in the WHEN …​ DO statement will be rolled back as well.The same limitation applies to the EXECUTE PROCEDURE statement.Read an interesting discussion of the phenomenon in Firebird Tracker ticket firebird#4803.

  2. In selectable stored procedures, output rows that were already passed to the client in previous iterations of a FOR SELECT …​ DO …​ SUSPEND loop remain available to the client if an exception is thrown subsequently in the process of retrieving rows.

Scope of a WHEN …​ DO Statement

A WHEN …​ DO statement catches errors and exceptions in the current block of statements.It also catches exceptions from nested blocks, if those exceptions have not been handled in those blocks.

All changes made before the statement that caused the error are visible to a WHEN …​ DO statement.However, if you try to log them in an autonomous transaction, those changes are unavailable, because the transaction where the changes took place is not committed at the point when the autonomous transaction is started.Example 4, below, demonstrates this behaviour.

Tip

When handling exceptions, it is sometimes desirable to handle the exception by writing a log message to mark the fault and having execution continue past the faulty record.Logs can be written to regular tables, but there is a problem with that: the log records will “disappear” if an unhandled error causes the module to stop executing, and a rollback is performed.Use of external tables can be useful here, as data written to them is transaction-independent.The date inserted into a linked external file will still be there, regardless of whether the overall process succeeds or not.

Examples using WHEN…​DO

  1. Replacing the standard error with a custom one:

    CREATE EXCEPTION COUNTRY_EXIST '';
    SET TERM ^;
    CREATE PROCEDURE ADD_COUNTRY (
      ACountryName COUNTRYNAME,
      ACurrency VARCHAR(10) )
    AS
    BEGIN
      INSERT INTO country (country, currency)
        VALUES (:ACountryName, :ACurrency);
    
      WHEN SQLCODE -803 DO
        EXCEPTION COUNTRY_EXIST 'Country already exists!';
    END^
    SET TERM ^;
  2. Logging an error and re-throwing it in the WHEN block:

    CREATE PROCEDURE ADD_COUNTRY (
      ACountryName COUNTRYNAME,
      ACurrency VARCHAR(10) )
    AS
    BEGIN
      INSERT INTO country (country,
                           currency)
      VALUES (:ACountryName,
              :ACurrency);
      WHEN ANY DO
      BEGIN
        -- write an error in log
        IN AUTONOMOUS TRANSACTION DO
          INSERT INTO ERROR_LOG (PSQL_MODULE,
                                 GDS_CODE,
                                 SQL_CODE,
                                 SQL_STATE,
                                 MESSAGE)
          VALUES ('ADD_COUNTRY',
                  GDSCODE,
                  SQLCODE,
                  SQLSTATE,
                  RDB$ERROR(MESSAGE));
        -- Re-throw exception
        EXCEPTION;
      END
    END
  3. Handling several errors in one WHEN block

    ...
    WHEN GDSCODE GRANT_OBJ_NOTFOUND,
    	 GDSCODE GRANT_FLD_NOTFOUND,
    	 GDSCODE GRANT_NOPRIV,
    	 GDSCODE GRANT_NOPRIV_ON_BASE
    DO
    BEGIN
      EXECUTE PROCEDURE LOG_GRANT_ERROR(GDSCODE,
        RDB$ERROR(MESSAGE);
      EXIT;
    END
    ...
  4. Catching errors using the SQLSTATE code

    EXECUTE BLOCK
    AS
      DECLARE VARIABLE I INT;
    BEGIN
      BEGIN
        I = 1/0;
        WHEN SQLSTATE '22003' DO
          EXCEPTION E_CUSTOM_EXCEPTION
            'Numeric value out of range.';
        WHEN SQLSTATE '22012' DO
          EXCEPTION E_CUSTOM_EXCEPTION
            'Division by zero.';
        WHEN SQLSTATE '23000' DO
          EXCEPTION E_CUSTOM_EXCEPTION
           'Integrity constraint violation.';
      END
    END