FirebirdSQL logo
  • Anglaiskeyboard_arrow_down
 SQL SecuritySupplementary Information 

SET ROLE Examples

  1. Change the current role to MANAGER

    SET ROLE manager;
select current_role from rdb$database;

ROLE
=======================
MANAGER

  2. Clear the current role

    SET ROLE NONE;
select current_role from rdb$database;

ROLE
=======================
NONE
See also

[fblangref50-management-role-set-trusted], GRANT

SET TRUSTED ROLE

Sets the active role of the current session to the trusted role

Available in

DSQL

Syntax
SET TRUSTED ROLE

The SET TRUSTED ROLE statement makes it possible to assume the role assigned to the user through a mapping rule (see Mapping of Users to Objects).The role assigned through a mapping rule is assumed automatically on connect, if the user hasn’t specified an explicit role.The SET TRUSTED ROLE statement makes it possible to assume the mapped (or “trusted”) role at a later time, or to assume it again after the current role was changed using SET ROLE.

A trusted role is not a specific type of role, but can be any role that was created using CREATE ROLE, or a predefined system role such as RDB$ADMIN.An attachment (session) has a trusted role when the security objects mapping subsystem finds a match between the authentication result passed from the plugin and a local or global mapping to a role for the current database.The role may be one that is not granted explicitly to that user.

When a session has no trusted role, executing SET TRUSTED ROLE will raise error “Your attachment has no trusted role”.

Note

While the CURRENT_ROLE can be changed using SET ROLE, it is not always possible to revert to a trusted role using the same command, because SET ROLE checks if the role has been granted to the user.With SET TRUSTED ROLE, the trusted role can be assumed again even when SET ROLE fails.

SET TRUSTED ROLE Examples

  1. Assuming a mapping rule that assigns the role ROLE1 to a user ALEX:

    CONNECT 'employee' USER ALEX PASSWORD 'password';
SELECT CURRENT_ROLE FROM RDB$DATABASE;

ROLE
===============================
ROLE1

SET ROLE ROLE2;
SELECT CURRENT_ROLE FROM RDB$DATABASE;

ROLE
===============================
ROLE2

SET TRUSTED ROLE;
SELECT CURRENT_ROLE FROM RDB$DATABASE;

ROLE
===============================
ROLE1
See also

[fblangref50-management-role-set], Mapping of Users to Objects

Session Timeouts

Statements for management of timeouts of the current connection.

SET SESSION IDLE TIMEOUT

Sets the session idle timeout

Syntax
SET SESSION IDLE TIMEOUT value [<time-unit>]

<time-unit> ::= MINUTE | HOUR | SECOND
Table 1. SET SESSION IDLE TIMEOUT Statement Parameters
Parameter Description

value

The timeout duration expressed in time-unit.A value of 0 defers to connection idle timeout configured for the database.

time-unit

Time unit of the timeout.Defaults to MINUTE.

The SET SESSION IDLE TIMEOUT sets an idle timeout at connection level and takes effect immediately.The statement can run outside transaction control (without an active transaction).

Setting a value larger than configured for the database is allowed, but is effectively ignored, see also [fblangref50-management-session-timeout-effective].

The current timeout set for the session can be retrieved through RDB$GET_CONTEXT, namespace SYSTEM and variable SESSION_IDLE_TIMEOUT.Information is also available from MON$ATTACHMENTS:

MON$IDLE_TIMEOUT

Connection-level idle timeout in seconds;0 if timeout is not set.

MON$IDLE_TIMER

Idle timer expiration time;contains NULL if an idle timeout was not set, or if a timer is not running.

Both RDB$GET_CONTEXT('SYSTEM', 'SESSION_IDLE_TIMEOUT') and MON$ATTACHMENTS.MON$IDLE_TIMEOUT report the idle timeout configured for the connection;they do not report the effective idle timeout.

The session idle timeout is reset when [fblangref50-management-session-reset-alter] is executed.

Idle Session Timeouts

An idle session timeout allows a use connection to close automatically after a specified period of inactivity.A database administrator can use it to enforce closure of old connections that have become inactive, to reduce unnecessary consumption of resources.It can also be used by application and tools developers as an alternative to writing their own modules for controlling connection lifetime.

By default, the idle timeout is not enabled.No minimum or maximum limit is imposed, but a reasonably large period — such as a few hours — is recommended.

How the Idle Session Timeout Works

  • When the user API call leaves the engine (returns to the calling connection) a special idle timer associated with the current connection is started

  • When another user API call from that connection enters the engine, the idle timer is stopped and reset to zero

  • If the maximum idle time is exceeded, the engine immediately closes the connection in the same way as with asynchronous connection cancellation:

    • all active statements and cursors are closed

    • all active transactions are rolled back

    • The network connection remains open at this point, allowing the client application to get the exact error code on the next API call.The network connection will be closed on the server side, after an error is reported or in due course as a result of a network timeout from a client-side disconnection.

Note

Whenever a connection is cancelled, the next user API call returns the error isc_att_shutdown with a secondary error specifying the exact reason.Now, we have

isc_att_shut_idle

Idle timeout expired

in addition to

isc_att_shut_killed

Killed by database administrator

isc_att_shut_db_down

Database is shut down

isc_att_shut_engine

Engine is shut down
Setting the Idle Session Timeout
Note

The idle timer will not start if the timeout period is set to zero.

An idle session timeout can be set:

  • At database level, the database administrator can set the configuration parameter ConnectionIdleTimeout, an integer value in minutes.The default value of zero means no timeout is set.It is configurable per-database, so it may be set globally in firebird.conf and overridden for individual databases in databases.conf as required.

    The scope of this method is all user connections, except system connections (garbage collector, cache writer, etc.).

  • at connection level, the idle session timeout is supported by both the SET SESSION IDLE TIMEOUT statement and the API (setIdleTimeout).The scope of this method is specific to the supplied connection (attachment).Its value in the API is in seconds.In the SQL syntax it can be hours, minutes or seconds.Scope for this method is the connection to which it is applied.

Note

For more information about the API calls, consult theFirebird 4.0 Release Notes.
Determining the Timeout that is In Effect

The effective idle timeout value is determined whenever a user API call leaves the engine, checking first at connection level and then at database level.A connection-level timeout can override the value of a database-level setting, as long as the period of time for the connection-level setting is no longer than any non-zero timeout that is applicable at database level.

Important

Take note of the difference between the time units at each level.At database level, in the configuration files, the unit for SessionTimeout is minutes.In SQL, the default unit is minutes but can also be expressed in hours or seconds explicitly.At the API level, the unit is seconds.

Absolute precision is not guaranteed in any case, especially when the system load is high, but timeouts are guaranteed not to expire earlier than the moment specified.

SET STATEMENT TIMEOUT

Sets the statement timeout for a connection

Syntax
SET STATEMENT TIMEOUT value [<time-unit>]

<time-unit> ::= SECOND | MILLISECOND | MINUTE | HOUR
Table 1. SET STATEMENT TIMEOUT Statement Parameters
Parameter Description

value

The timeout duration expressed in time-unit.A value of 0 defers to statement timeout configured for the database.

time-unit

Time unit of the timeout.Defaults to SECOND.

The SET STATEMENT TIMEOUT sets a statement timeout at connection level and takes effect immediately.The statement can run outside transaction control (without an active transaction).

Setting a value larger than configured for the database is allowed, but is effectively ignored, see also [fblangref50-management-stmnt-timeout-effective].

The current statement timeout set for the session can be retrieved through RDB$GET_CONTEXT, namespace SYSTEM and variable STATEMENT_TIMEOUT.Information is also available from MON$ATTACHMENTS:

MON$STATEMENT_TIMEOUT

Connection-level statement timeout in milliseconds;0 if timeout is not set.

In MON$STATEMENTS:

MON$STATEMENT_TIMEOUT

Statement-level statement timeout in milliseconds;0 if timeout is not set.

MON$STATEMENT_TIMER

Timeout timer expiration time;contains NULL if an idle timeout was not set, or if a timer is not running.

Both RDB$GET_CONTEXT('SYSTEM', 'STATEMENT_TIMEOUT') and MON$ATTACHMENTS.MON$STATEMENT_TIMEOUT report the statement timeout configured for the connection, and MON$STATEMENTS.MON$STATEMENT_TIMEOUT for the statement;they do not report the effective statement timeout.

The statement timeout is reset when [fblangref50-management-session-reset-alter] is executed.

Statement Timeouts

The statement timeout feature allows execution of a statement to be stopped automatically when it has been running longer than a given timeout period.It gives the database administrator an instrument for limiting excessive resource consumption from heavy queries.

Statement timeouts can also be useful to application developers when creating and debugging complex queries without advance knowledge of execution time.Testers and others could find them handy for detecting long-running queries and establishing finite run times for test suites.

How the Statement Timeout Works

When the statement starts execution, or a cursor is opened, the engine starts a special timer.It is stopped when the statement completes execution, or the last record has been fetched by the cursor.

Note

A fetch does not reset this timer.

When the timeout point is reached:

  • if statement execution is active, it stops at closest possible moment

  • if statement is not active currently (between fetches, for example), it is marked as cancelled, and the next fetch will break execution and return an error

Note
Statement types excluded from timeouts

Statement timeouts are not applicable to some types of statement and will be ignored:

  • All DDL statements

  • All internal queries issued by the engine itself
Setting a Statement Timeout
Note

The timer will not start if the timeout period is set to zero.

A statement timeout can be set:

  • at database level, by the database administrator, by setting the configuration parameter StatementTimeout in firebird.conf or databases.conf.StatementTimeout is an integer representing the number of seconds after which statement execution will be cancelled automatically by the engine.Zero means no timeout is set.A non-zero setting will affect all statements in all connections.

  • at connection level, using SET STATEMENT TIMEOUT or the API for setting a statement timeout (setStatementTimeout).A connection-level setting (via SQL or the API) affects all statements for the given connection;units for the timeout period at this level can be specified to any granularity from hours to milliseconds.

  • at statement level, using the API, in milliseconds

Determining the Statement Timeout that is In Effect

The statement timeout value that is in effect is determined whenever a statement starts executing, or a cursor is opened.In searching out the timeout in effect, the engine goes up through the levels, from statement through to database and/or global levels until it finds a non-zero value.If the value in effect turns out to be zero then no statement timer is running and no timeout applies.

A statement-level or connection-level timeout can override the value of a database-level setting, as long as the period of time for the lower-level setting is no longer than any non-zero timeout that is applicable at database level.

Important

Take note of the difference between the time units at each level.At database level, in the conf file, the unit for StatementTimeout is seconds.In SQL, the default unit is seconds but can be expressed in hours, minutes or milliseconds explicitly.At the API level, the unit is milliseconds.

Absolute precision is not guaranteed in any case, especially when the system load is high, but timeouts are guaranteed not to expire earlier than the moment specified.

Whenever a statement times out and is cancelled, the next user API call returns the error isc_cancelled with a secondary error specifying the exact reason, viz.,

isc_cfg_stmt_timeout

Config level timeout expired

isc_att_stmt_timeout

Attachment level timeout expired

isc_req_stmt_timeout

Statement level timeout expired

Note
Notes about Statement Timeouts

  1. A client application could wait longer than the time set by the timeout value if the engine needs to undo a large number of actions as a result of the statement cancellation

  2. When the engine runs an EXECUTE STATEMENT statement, it passes the remainder of the currently active timeout to the new statement.If the external (remote) engine does not support statement timeouts, the local engine silently ignores any corresponding error.

  3. When the engine acquires a lock from the lock manager, it tries to lower the value of the lock timeout using the remainder of the currently active statement timeout, if possible.Due to lock manager internals, any statement timeout remainder will be rounded up to whole seconds.

Time Zone Management

Statements for management of time zone features of the current connections.

SET TIME ZONE

Sets the session time zone

Syntax
SET TIME ZONE { time_zone_string | LOCAL }

Changes the session time zone to the specified time zone.Specifying LOCAL will revert to initial session time zone of the session (either the default or as specified through connection property isc_dpb_session_time_zone).

Executing [fblangref50-management-session-reset-alter] has the same effect on the session time zone as SET TIME ZONE LOCAL, but will also reset other session properties.

SET TIME ZONE Examples

set time zone '-02:00';
set time zone 'America/Sao_Paulo';
set time zone local;

Optimizer Configuration

SET OPTIMIZE

Configures whether the optimizer should optimize for fetching first or all rows.

Syntax
SET OPTIMIZE <optimize-mode>

<optimize-mode> ::=
    FOR {FIRST | ALL} ROWS
  | TO DEFAULT

This feature allows the optimizer to consider another (hopefully better) plan if only a subset or rows is fetched initially by the user application (with the remaining rows being fetched on demand), thus improving the response time.

It can also be specified at the statement level using the OPTIMIZE FOR clause.

The default behaviour can be specified globally using the OptimizeForFirstRows setting in firebird.conf or databases.conf.

Reset Session State

ALTER SESSION RESET

Resets the session state of the current connection to its initial values

Syntax
ALTER SESSION RESET

Resetting the session can be useful for reusing the connection by a client application (for example, by a client-side connection pool).When this statement is executed, all user context variables are cleared, contents of global temporary tables are cleared, and all session-level settings are reset to their initial values.

It is possible to execute ALTER SESSION RESET without a transaction.

Execution of ALTER SESSION RESET performs the following steps:

  • Error isc_ses_reset_err (335545206) is raised if any transaction is active in the current session other than the current transaction (the one executing ALTER SESSION RESET) and two-phase transactions in the prepared state.

  • System variable RESETTING is set to TRUE.

  • ON DISCONNECT database triggers are fired, if present and if database triggers are not disabled for the current connection.

  • The current transaction (the one executing ALTER SESSION RESET), if present, is rolled back.A warning is reported if this transaction modified data before resetting the session.

  • Session configuration is reset to their initial values.This includes, but is not limited to:

    • DECFLOAT parameters (TRAP and ROUND) are reset to the initial values defined using the DPB at connect time, or otherwise the system default.

    • Session and statement timeouts are reset to zero.

    • The current role is restored to the initial value defined using DPB at connect time, and — if the role changed — the security classes cache is cleared.

    • The session time zone is reset to the initial value defined using the DPB at connect time, or otherwise the system default.

    • The bind configuration is reset to the initial value defined using the DPB at connect time, or otherwise the database or system default.

    • In general, configuration values should revert to the values configured using the DPB at connect time, or otherwise the database or system default.

  • Context variables defined for the USER_SESSION namespace are removed (USER_TRANSACTION was cleared earlier by the transaction roll back).

  • Global temporary tables defined as ON COMMIT PRESERVE ROWS are truncated (their contents is cleared).

  • ON CONNECT database triggers are fired, if present and if database triggers are not disabled for the current connection.

  • A new transaction is implicitly started with the same parameters as the transaction that was rolled back (if there was a transaction)

  • System variable RESETTING is set to FALSE.

Note

  • The context variables CURRENT_USER and CURRENT_CONNECTION will not be changed.

  • As isql starts multiple transactions for a single connection, ALTER SESSION RESET cannot be executed in isql.

Error Handling

Any error raised by ON DISCONNECT triggers aborts the session reset and leaves the session state unchanged.Such errors are reported using primary error code isc_session_reset_err (335545206) and error text "Cannot reset user session".

Any error raised after ON DISCONNECT triggers (including the ones raised by ON CONNECT triggers) aborts both the session reset and the connection itself.Such errors are reported using primary error code isc_ses_reset_failed (335545272) and error text "Reset of user session failed. Connection is shut down.".Subsequent operations on the connection (except detach) will fail with error isc_att_shutdown (335544856).

Debugging

SET DEBUG OPTION

Sets debug options

Syntax
SET DEBUG OPTION option-name = value
Table 1. Supported options
Option name Value Type Description

DSQL_KEEP_BLR

BOOLEAN

Stores statement BLR for retrieval with isc_info_sql_exec_path_blr_bytes and isc_info_sql_exec_path_blr_text.

SET DEBUG OPTION configures debug information for the current connection.

Warning

Debug options are closely tied to engine internals and their usage is discouraged if you do not understand how these internals are subject to change between versions.